Government Engineering College-GEC has published Painting And Special Repair Works To Shopping Complex Building In Puducherry Technological University ( Ptu ) Campus Under Rusa Fund ( Iii Call ) . Submission Date for this Tender is 31-01-2022. Painting Tenders in puducherry Puducherry. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Code No.2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
2 | Code No.14.75 Repair to plaster of thickness 12mm to 20mm in patches of area 2.5sqm and under including cutting the patch in proper shape , raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar , including disposal of rubbish , all complete |
3 | Code No.Nil : Non PSR: Removing the existing cement paint /colour wash in the interior/exterior face using scrapping blade /wire brush and other proper tools up to floor five level to ensure the surface is free of loose particles deposits dusts etc., complete all as directed by the engineer-in –charge. |
4 | Code No.Nil :Non PSR:Rectifying cracks in the brick panel wall of the existing building of size 6mm width and 20mm deep groove with crack filling mortar CERA/SIKA/POSROC /MC Bauchmie / DON/BASF or Equivalent make certified and tested by accredited institutions like IIT /SERC/NTH or so (confirming to ASTM 827 SNCRDC621 and BS 6319part 2 1983) as per specification and as directed by Engineer –in –charge. |
5 | Code No.Nil :Non PSR: Applying a polymer based anticorrosive coating material of CERA/SIKA/FOSROC/ MC Bauchmie /DON/BASF OR EQUIVALENT make certified and tested by accredited institutions mixing mechanically until it is homogeneous and applying the same as one rich coat on prepared steel surface with brush with all lead and lift etc., complete and as directed by Engineer –in –charge. (Measurement as per the total area of treatment). |
6 | Code No.15.12.1 Dismantling doors, windows and clerestorywindows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead - of area 3 sqm and below |
7 | Code No.10.15.1 Providing and fixing M.S.Tubular frames for doors, windows,ventilators and cupboard with rectangular / L-type sections ,made of 1.60 mm thick M.S.sheet , joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer - fixing with 15x3 mm lugs 10cm longembedded in cement concrete block 15x10x10 cm of C.C.1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size) |
8 | Code No.9.51.2 : Providing and fixing fly proof galvanisedM.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mmwith 12mm mild steel U beading |
9 | Code No.13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture"s specification - Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm |
10 | Code No.14.42.1 White washing with lime to give an even shade - Old work (two or more coats) |
11 | Code No.13.52.1 Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface , etc.complete - on steel work |
12 | Code No.22.14.2 Grading roof for water proofing treatment with - Cement mortar 1:3 (1 cement : 3 coarse sand) |
13 | Code No.15.42.2 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead - 100 mm dia pipe |
14 | Code No.12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter |
15 | Code No.12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVCrain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend |
16 | Code No.12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe |
17 | Code No.12.43.2 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs , screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm |
18 | Code No.32.17.1 Providing M.S. foot rests including fixing in manholes with 20 x 20 x 10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design - with 20 x 20 mm square bar. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail