Military Engineer Services-MES has published Provn Of Shed For Heavy Machinery Of 508 Abw At Chheoki Provn Of Shed For Heavy Machinery Of 508 Abw At Chheoki. Submission Date for this Tender is 23-02-2022. Shed Construction Tenders in allahabad Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 31-Jan-2022 | Postpond of date | Date | 23-02-2022 |
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft loose soil complete all as specified and as directed. |
| 2 | Excavting in trenches, n.exc 1.5m wide and n.exc 1.5m in depth, foir foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc., n.exc 10sqm on plan and n.exc 1.5m in depth and gtting in hard/dense soil complete all as specified and as directed. |
| 3 | M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Use and waste of Formwork to sides of pillars, posts, struts, piers, columns, and stanchions for rectangular , square or polygun fair finished surfaces of concrete complete all as specified and as directed. |
| 5 | M&L for RCC M-25 design mix using 20mm graded stone aggregate for columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm as in hard/dense soil complete all as specified and as directed. |
| 7 | Removing excavated material (soil) to a distancen.exc 50 m and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 8 | M&L for Hard core of gauge not exc 63 mm deposited,spread and levelled in layers not exc 15 cm thick watered rammed to a true surfacewith broken stone / boulders complete all as specified and as directed. |
| 9 | Moorum / red bajri filling in floors or pavings laid in layers n exc 15 cm thick spread,levelled and rammed including watering etc complete including moorum brought out side MD land complete all as specified and as directed. |
| 10 | M&L PCC 1:4:8 type D2, using (40 mm graded agg) ,150 mm thick asin sub base of flooring all as specified & directed. |
| 11 | M&L PCC 1:2:4 type B1, using (20 mm graded agg) ,100 mm thick asin floors & pavings laid in alternate panels all as specified & directed. |
| 12 | M&L for forming construction joint 30mm deep 10mm wide filled with sealing compond Gde-A complete all as specified and directed. |
| 13 | M&L for mild steel TMTbars 8mm dia and over cut to length , bent to shape required including cranking bending etc and binding with mild steel wire (annealed ) not less than 0.90 mm dia as in reinforcement complete all as specified and directed. |
| 14 | S&F for Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde. E-250) quality "A"all as specified and directed. |
| 15 | S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and as directed by the Engineer-in-Charge |
| 16 | M&L for plate girder or single stanchions, built up of one beam of channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections Fe 410-W(Gde E-250) quality - "A". |
| 17 | S & F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 22.5cm long,16mm to 20mm dia complete all as specified & directed. |
| 18 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 19 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 20 | S&F M S flat iron wind ties for roof including securing bolts & &all necessary drilling ,bolting or riveting etcand similar work conforming to FE-290 Gde E-165complete all as specified and directed. |
| 21 | M&L for preparation of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 22 | M&L Brickwork with old size sub class "B" bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 23 | M&L for 15mm thick renderingon fair faces of brick work in CM 1:4finished even and smooth with out using extra cement complete all as specified and directed. |
| 24 | M&L for cement concrete 1:2:4type B0 (12.5mm graded aggregate)as lintel, cills, steps sesmic and other similar bends coping and similar items etc. |
| 25 | S&F MS rolled section as in framing for clading,glazing and like fix with and connecting plates etc. (Fe-410-w Gde-E quality-A) complete all as specified and as directed. |
| 26 | S&F framed work in doors or gates of angle or other section with gusset plates, rails braces etc, of grade Fe 410-0 or Fe-10-0 cpmplete drill for fixing of steel sheeting or other covering . Doors etc to be prepared by hanging and sliding with and including either hooks and hinges por steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixingcomplete all as specified and directed. |
| 27 | M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection without using extra cement complete all as specified and directed. |
| 28 | S&F 1.2mm thick MS sheet in wall clading, steel gates and similar work, cut to size,holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed. |
| 29 | M&L for preparation ofnew plastered surface of any descriptionapplying two coats of cement base paint over a coat of primer onsurfaces of wall complete all as spd and directed. |
| 30 | M & L for Soling (or sub base) of well broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to requied gradient and camber complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | M & L for PCC 1:5:10 Type E2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge. |
| 32 | M&L cement concrete work in pavement/hard standing of flexural strength 40 kg/per square centimeter in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or lesscomplete all as specified and as directed by the Engineer-in-Charge. |
| 33 | M&L for forming 12mm thick expansion joints fied with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade-A.complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | M&L for point wiring (Steel Conduit type) complete with FRLS PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm( 22/0.30 or 30/0.25), 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and including cutting/chasing on brick wall not exc. 10 cm girth (excluding ceiling surface)and supply and fixing PVC conduit pipe medium grade of nominal size 20 mm dia along with connected fittings/junction boxes using new MS sunkterminal boxes of thickness not less 1.22 mm, new 3 mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good complete all as specified and directed and suitable for the following: - |
| 35 | (i) One light point or one fan point controlled by one, 1- way switch |
| 36 | (ii) One 3/5 pin socket outlet, 6 Amp on “independent board” |
| 37 | (iii) One 3/5 pin socket outlet, 6 Amp on the same board with other switches |
| 38 | All as per ser item No 34 here in before but point wiring using 2.5 sq mm suitable for 16 amps “ independent board”. |
| 39 | Supply & fixing ISI marked switch piano flush button type, single pole, one way, 6 Amps, 240 volts for point wiring complete all as specified and directed . |
| 40 | Supply & fixing socket out let 6 pin, 6 Amps flush type for point wiring complete all as specified and directed. . |
| 41 | Supply & Fixing switch socket combination multipurpose 2 in 1, 6 pin, 6 and 16 Amp, and flush type universal for power point wiring complete all as specified and directed. |
| 42 | Supply & fixing ceiling rose 3 pin/PVC/ polycarbonate, isolated body with colour ring for fan point wiring all as specified and directed. |
| 43 | Supply and fixing Exhaust fan , steel body AC single phase 230 V of size 450mm sweep with , blade and frames and lovers with making hole, ISI marked complete all as specified and directed. |
| 44 | Supply & fixing industrial wall mounted plug socket of 32 amps three phase one neutral and earthingsuitable for IP 67complete all as specified and directed . |
| 45 | Supply, fixing, connecting & testing T8 TLED with suspended mounted waterproof luminiare suitable for twinLED tube light of 19 Watt having IP 65 protection with complete suspension system complete all as specified and directed. Make:TCW450 P 2XTLED 19W P3397 of Philips/Havells/CG or as approved |
| 46 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated copper conductor for submain wiring alongwith earth wire with 4x10 sqmm+2x6 sqmm earth wire sizes of FRLS is pvc insulated copper conductor , single core cable insurface /recessed as required complete all as specified and directed. |
| 47 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated copper conductor for submain wiring alongwith earth wire with 4x16sqmm+2x10 sqmm earth wire sizes of FRLS is pvc insulated copper conductor , single core cable insurface /recessed as required complete all as specified and directed. |
| 48 | Supply & fixing TPN MCB Distribution Box of 12 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth barconfirming to IS 13032 & 8623 complete all as specified and directed. Cat Part no - DHDPSHODPW04 of make - Havells or its equivalent model in Standard/Schneider Electric/L&T/ HPL/ Indo asian/Hager |
| 49 | Supply & fixing DB with single phase & neutral MCB Distribution Box of 8 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth barconfirming to IS 13032 & 8623 complete all as specified and directed. Cat Part no - DHDPSHODPW04 of make - Havells or its equivalent model in Standard/Schneider Electric/L&T/ HPL/ Indo asian/Hager |
| 50 | Supply & fixing MCBwith MCB SP, 06 to 32 Amps 240 volts AC , "C" Series, conforming to IS 8828/IEC 60898-1including making connections with copper lugs, testing as required complete all as specified and directed. |
| 51 | Supply & fixing MCBwith MCB SPN, 63 Amps 240 volts AC , "C" Series, conforming to IS 8828/IEC 60898-1including making connections with copper lugs, testing as required complete all as specified and directed. |
| 52 | Supply & fixing MCBwith MCB TPN,100 Amps 440 volts AC , "C" Series, conforming to IS 8828/IEC 60898-1including making connections with copper lugs, testing as required complete all as specified and directed. |
| 53 | Supply & fixing Air Circulator fans 230 volts single phase oscillating 450mm sweep suitable for wall mountingcomplete all as specified and directed. |
| 54 | M&L for earthing as per IS:3043with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.5 metres deep below ground level) with top edge of the plate not less than 1.25 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 40 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade compete all as specified as shown in electrical plate no. 2 of SSR Part-I and testing of earth resistance as required. |
| 55 | Excavationin trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for laying of pipe,and getting out in soft/loose soil All as specified and directed |
| 56 | Returning, filling in, including spreading, leveling, watering and well ramming in layersn. exc 25 Cms in soft/loose soilAll as specified and directed |
| 57 | Supply and Fixing and testing ofgalvanized steel tubingof following sizes, medium grade with all fittings and fixed to walls and ceilings or laid in floors,trenches complete all as specified and directed. |
| 58 | (b) 20mm bore |
| 59 | (c) 25mm bore |
| 60 | (d) 40 mm bore |
| 61 | S&F and testingin replacement stop valves, castiron, screwed down, high pressure, with crutch or butterfly handle, screwed both ends, for iron pipe or for unions of following sizes, complete all as specified and directed. |
| 62 | (b) 20mm bore |
| 63 | (c) 25mm bore |
| 64 | S & Fin replacement Gun Metal Globe or gate valve with iron wheel head , screwed both ends for iron pipeor for unions of following sizes, complete all as specified and directed. |
| 65 | (a) 40 mm bore |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
