Defence Research And Development Organisation -DRADO has published Repair And Maintenance Of External Electrification And Street Lights At Itm Mussoorie. Repair And Maintenance Of External Electrification And Street Lights At Itm Mussoorie. => Limited. Submission Date for this Tender is 08-02-2022. Electrification Work Tenders in mussoorie Uttarakhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Disconnecting and taking down old existing unsv street light fittings/security light fitting/floor light fittings of any description and any position from poles/walls/pillars etc and refixing after repair by replacement of LED driver of existing make and model of LED fitting 45 watt to 90 watts, internal wiring complete all as directed by Engineer-in-Charge. |
| 2 | Taking down old unsv existing street light fitting/security light fitting of any description and any position from poles/walls/pillars etc,Supply and fixLED street light60 watts with LED lamp made upof pressure die cast housing with toughend glass IP-66 protection including making connections complete all as specified and directed. Code No.1696800 Type-BRTFG 60W LED, Make: Bajaj/ Havells |
| 3 | All as per item ser No 1.02 above but 45 Watt, Type - BRTFG60 LED. Code No. 169808 Make: Bajaj / Havells/ Crompton |
| 4 | All as per item ser No 1.02 above butLED post top light fixture 30 watts including lamp, code No.112364, Type-BGGCTW4LED WW,made in cast aluminium spigot housing with decorative clear opal acrylic diffuser and IP65 protectionwith lamp complete. Make: Bajaj/Havells |
| 5 | All as per item ser No 1.02 above but bollard light fitting 9 Watt Type - BRTFG60 LED. Code No. 169808 Make: Bajaj /equivt. |
| 6 | Dismantling of highmast light of any height and any capacity, repairs to raising and lowering system of Highmast light, repairs to double drum winch, proper checking of lubrication system, checking and tightening of trailing cable repairs to remote for up and down of lantern carriage, fixing of LED flood light luminaires 70 watts with suitable bracket and making serviceable including base protection of highmast light and raise the same on existing height and position all as specified and directed at site. (Note-LED flood light 70 watts shall be measured and paid separately) |
| 7 | Supply and replacement of LED flood light of capacity 70 watts suitable for high mast light |
| 8 | Supply only LT XLPE UG cable with aluminium conductor, heavy duty, 1100 volts of size 35 sq mm 3.5 core. Make : Havells/Polycab |
| 9 | All as per item ser No 1.06 here in before but size of cable 25 sqmm 4 core |
| 10 | All as per item ser No 1.06 here in before but size of cable 16 sqmm 4 core |
| 11 | All as per item ser No 1.06 here in before but size of cable 10 sqmm 2 core |
| 12 | Laying only PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc all as required and as directed. Upto 35 sq. mm |
| 13 | Supply and replacement of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of underground cable as required. |
| 14 | Supply and replacement of100 A, 16 KA, TP, MCCBwith thermomagnetic release and terminal spreaders in existing LT panel board including drilling holes in cubicle panel, making connectionsetcas required at site. Make: Legrand /L&T. |
| 15 | All as per item No. 1.14 above butcapacity 150 A, 16 KA,TP MCCB , Make: Legrand /L&T. |
| 16 | All as per item No. 1.14 above butcapacity 200 A, 25 KA,TP MCCB , Make: Legrand /L&T. |
| 17 | All as per item No. 1.14 above butcapacity 250 A, 25 KA,TP MCCB , Make: Legrand /L&T. |
| 18 | Supply and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for LT cable of size 150sqmm 3.5 corePVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required |
| 19 | All as per item ser No 1.18 here in before but size of LT cable 120 Sqmm 3.5 core |
| 20 | All as per item ser No 1.18 here in before but size of LT cable 95 Sqmm 3.5 core |
| 21 | All as per item ser No 1.18 here in before but size of LT cable 70 Sqmm 3.5 core |
| 22 | All as per item ser No 1.18 here in before but size of LT cable 50 Sqmm 3.5 core |
| 23 | Supply and replacement of indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for HT cable of size 70 Sq mm 3 core to 95 Sq mm 3 core, XLPE aluminium conductor cable of 11 kV grade as required. |
| 24 | All as per item ser No 1.23 here in before but for HT cable of size 120 sqmm 3 core |
| 25 | Supply and replacement of outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for HT cable of size 70 Sq mm 3 core to 95 Sq mm 3 core, XLPE aluminium conductor cable of 11 kV grade as required. |
| 26 | All as per item ser No 1.25 here in before but for HT cable of size 120 sqmm 3 core |
| 27 | Supply and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for HT cable of size 70 Sq mm 3 core to 95 Sq mm 3 core, XLPE aluminium conductor cable of 11 kV grade as required |
| 28 | All as per itemNo 1.27 here in before but for HT cable of size 120 sqmm 3 core |
| 29 | Supply and replacement of 32 mm dia X 2.00 meter long G.I. pipe (medium class) bracket for mounting of LED street light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
