}

Tender For Garden Fabrication Of Bonsai Section In Botanical Garden, chandigarh-Chandigarh

Chandigarh Administration Forest Dept -CAFD has published Tender For Garden Fabrication Of Bonsai Section In Botanical Garden. Submission Date for this Tender is 24-01-2022. Gardening Tenders in chandigarh Chandigarh. Bidders can get complete Tender details and download the document.




Tender Notice

30750221
Tender For Garden Fabrication Of Bonsai Section In Botanical Garden
Open Tender
Indian
Chandigarh
chandigarh
24-01-2022

Tender Details

Tender For Garden Fabrication Of Bonsai Section In Botanical Garden

Key Value

Document Fees
Refer document
EMD
INR 195300.0 /-
Tender Value
INR 97.63 Lakhs /-

BOQ Items

Name of Work: Fabrication of Bonsai Garden in Botanical GardenNote : L-1 bidder shall be decided based on lowest rate bidded for all items of works together. Any bidder not quoting all items of work is disqualified
Sl. No. Item Description
1Item with Detailed Specifications
2Steel Structure -Providing and Erecion of Steel Sturucture as per Structural Drawings at Site with Typical Portal fabricated with steel plates ofGRADE 350(FE-490) as per IS : 2062 with minimum Welding shall confirm to IS:816 and minimum Yield Stress of the Electrode 360 MPS and UTS 510-610 MPA as per IS : 814 . Foundation BOLTS of 8.8 GRADE & NUTS SHALL CONFORM TO IS:4000:1992.
3Painting of Steel Structure- Painting of Steel Structure includingh the cost of Material, labour, Scaffolding andat site, The Metal surface shall be thouroughly cleaned of any Grease and Oil which shall be then Primered with Enamel Based Metal Primer of Asian/Nerolac/Berger/Dulux make. Two Coats of Aluminium paint Shall be Done over the Primered Structre of Asian/Nerolac/Berger/Dulux make
4Stainless Steel Welded Wire Mesh- Providing and Fixing of Stainless Steel welded Wiremesh of 1.6mm th. Wire and50mmx50mm Void. The Fixing Shall be done with M.S. Strip and Self threading Screws. The Cost Shall Include the cost of Material, labour, Installation at site. The Welded Wiremesh Should be of 304 Grade with Lab test Certificate. Wiremesh Void shall be of 50 mm x 50mm with tolerence of +/- 1mm and the thichness of wire shall be 1.6mm with tolerence of +/- 0.1mm
5Polycarbonate Sheet- Providing and Fixing of poly carbonate sheet 3mm thick. The fixing shall be done with MS strip/ Cladding painted (Asin Item No. 2 above)
6Earthwork Excavation- Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m (all kind of soil)
7Good Earth Filling- Excavating, supplying and filling of local goods earth (including royalty) by mechanical transport upto a lead of 5 km alsoincluding ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, side of foundation etc complete
8PCC in Foundation and under Pavement- Cement concrete bedding in foundation and under pavement including shuttering, consolidation and curing etc complete 1:4:8 (in foundation)
9RCC work for foundation: Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing but excluding the cost of reinforcement- All work up to plinth level 1:1.5:3 (in foundation)
10RCC work for foundation: Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing but excluding the cost of reinforcement- All work up to plinth level 1:2:4 (For Plinth beams
11Centering and Shuttering:- Centering and Shuttering including strutting, propping and removal of form for Foundations, footings, bases of columns etc for mass concrete
12Steel Reinforcement-Fabricating and placing in position for steel reinforcement for RCC work including cutting bending, binding and cost of binding wire etc including wastage and rolling margin complete Thermo-Mechanically treated bars of grade Fe-500D or more
13Entrance Gate-Providing and fixing MS Designer Gate (AS per Drawing)
14Nursery Net:- Providing and fixing of nursery net around Bonsai section
15Brick Work: Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in Cement Mortar 1:6 (1 cement: Coarse sand)
16Foot Path 3"-6" wide: Providing and laying designer tiles (approved 40 mm thick)
17Water Body:- Construction of water body as per drawing including fixing of approved tiles and water proofing
18MS Chain railing:- Providing and fixing of MS Chain railing on both sides of foot path tied with MS round pipe poles as per drawing
19Fountain:- Providing/ erecting stone fountain in water body ( Approved one)
20Display boards:- Providing and fixing of display boards as per drawing
21Watering systems
22Electrification
23Contigency
24Technical Supervision during execution of work
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail