Border Security Force-BSF has published Repair Relaying Of Ug Cables Of Shq Campus Under Shq Bsf Shillong Repair Relaying Of Ug Cables Of Shq Campus Under Shq Bsf Shillong. Submission Date for this Tender is 18-01-2022. Cable Laying Tenders in mawpat Meghalaya. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
2 | Upto 35 sq. mm |
3 | Above 35 sq. mm and upto 95 sq. mm |
4 | Above 95 sq. mm and upto 185 sq. mm |
5 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
6 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
7 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
8 | Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) |
9 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
10 | 3½ X 35 sq. mm (32mm) |
11 | 3½ X 120 sq. mm (45mm) |
12 | SITC of outdoor double door joint box having dust and vermin proof compartmentalized panel made out of CRCA sheet required hardware duly treated for degusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade. The panel having PU/Neoprene rubber gasket of not less than 3 mm thickness. Separate detachable gland plate suitable MS base channel/angle iron, hinged door with locking arrangement for equipment /switchgear thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported stand made byby angle iron (25x3mm) size (0.600x0.900x0.300)Mtr . Side wall and cable alley compartment having bolted type door with / without detachable extension type structure (Only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator) outdoor distribution board panel having 1.6mm thickof 400amp,415Volt capacity 4 strip Copper bus barby means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves copper bus bar installed on insulator,Incuding 1 Nos 250Amp 4Pole(wSN) MCCB breaking capacity -40/45KA for incommer and ougoing MCCB1 Nos 100Amp,25KA ,4 pole & 1 Nos 63Amp,4P,16KA, including interconnection with 16Sqmm PVC copper wire with proper lugs and thimbles etc as required as per direction of engineer incharge. Panel Size:- (0.90x0.75) X 0.30M |
13 | SITC of outdoor double door joint box having dust and vermin proof compartmentalized panel made out of CRCA sheet required hardware duly treated for degusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade. The panel having PU/Neoprene rubber gasket of not less than 3 mm thickness. Separate detachable gland plate suitable MS base channel/angle iron, hinged door with locking arrangement for equipment /switchgear thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported stand made byby angle iron (25x3mm) size (0.600x0.600x0.300)Mtr . Side wall and cable alley compartment having bolted type door with / without detachable extension type structure (Only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator) outdoor distribution board panel having 1.6mm thickof 400amp,415Volt capacity 4 strip Copper bus barby means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves copper bus bar installed on insulator,IncudingincommerMCCB1 Nos 100Amp,, including interconnection with 16Sqmm PVC copper wire with proper lugs and thimbles etc as required as per direction of engineer incharge. Panel Size:- (0.60x060) X 0.30M |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail