}

maintenance Mtc. Of Road From Suktara Club To Balurchar Via Shitlatala Sh Patch Soling, Patch Mettaling, Recarpeting, Grouting Etc. During Year 2021 22 Mtc. Of Road From Suktara Club To Balurchar Via Shitlatala Sh Patch Soling, Patch Mettaling, Recar, agartala-Tripura

Public Works Department-PWD has published maintenance Mtc. Of Road From Suktara Club To Balurchar Via Shitlatala Sh Patch Soling, Patch Mettaling, Recarpeting, Grouting Etc. During Year 2021 22 Mtc. Of Road From Suktara Club To Balurchar Via Shitlatala Sh Patch Soling, Patch Mettaling, Recar. Submission Date for this Tender is 02-02-2022. Road Work Tenders in agartala Tripura. Bidders can get complete Tender details and download the document.




Tender Notice

30717244
maintenance Mtc. Of Road From Suktara Club To Balurchar Via Shitlatala Sh Patch Soling, Patch Mettaling, Recarpeting, Grouting Etc. During Year 2021 22 Mtc. Of Road From Suktara Club To Balurchar Via Shitlatala Sh Patch Soling, Patch Mettaling, Recar
Open Tender
Indian
Tripura
agartala
02-02-2022

Tender Details

maintenance Mtc. Of Road From Suktara Club To Balurchar Via Shitlatala Sh Patch Soling, Patch Mettaling, Recarpeting, Grouting Etc. During Year 2021 22 Mtc. Of Road From Suktara Club To Balurchar Via Shitlatala Sh Patch Soling, Patch Mettaling, Recarpeting, Grouting Etc. During Year 2021 22

Key Value

Document Fees
INR 1000 /-
EMD
INR 24250.0 /-
Tender Value
INR 24.25 Lakhs /-

BOQ Items

Name of Work: Mtc. of road from Suktara Club to Balurchar via Shitlatala/ SH: Patch Soling, Patch Mettaling, Re-carpeting, Grouting etc. during year 2021-22.
Sl. No. Item Description
1Flat Brick soling Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.
2Brick edging laid length wise Providing and laying brick edging laid lengthwise on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412.
3Brick on edge soling Providing and laying brick on edge soling layer on prepared subgrade according to lines, grades and cross section shown on the drawing, filling joints with sand, watering and rolling the same with three wheeled road roller 80-100 kn as per MoRD Technical Specification clause 412.
4WBM Grading 3 Providing, laying, spreading and compacting jhama brick aggregates of specified sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 KNin stages to proper grade and camber, applying and brooming,binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD Technical Specification Clause 405. A) By Manual Means
5Providing and applying tack coat with bitumen (VG-30) using distributor at the rate of 0.75 kg per sqm on the prepared bituminous surafce/granuler surface cleaned with hydraulic broom as per MoRD Technical Specification clause 503.
620 mm thick Open-Graded Premix Carpet using Bituminous (viscosity grade/ modified bitumen) Binder Providing , laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508. Case - I : By Manual Means i) Bitumen of VG-30
7Seal coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510. A) By Manual Means Case - IV : Type D (premix with fine sand) i) Bitumen of VG-30
8Maintenance of bituminous surface road using Jhama brick aggregate Repair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with B.M (using jhama brick aggregate & bitumen of VG 30), after applying prime coat at the bottom and tack coat on sides and on bottom (using bitumen emulsion) and compacting, trimming & finishing the surface to form a smooth continuous surface, all as per MoRD technical specification Clauses 1900, 502, 503 and 504.
9Excavation for Structures B) With dewatering. Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, construction of shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. i) Ordinary Soil a) Upto 3 m depth
10Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200 I. Sand filling
11Providing concrete for plain concrete ( using jhama brick aggregate ) in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centring, shuttering, staging etc. but excluding reinforcement ). I. Nominal mix 1:3:6
12Brick masonry work in cement mortar in foundation completed excluding pointing & plastering as per drawing & MoRD technical specifications Clauses 600, 1202 & 1203. i) Brick masonry in 1:4 cement mortar
13Plain/reinforced cement concrete in substructure complete including formwork as per drawings &MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. (including centering, shuttering, staging etc. but excluding reinforcement) v) R.C.C grade M-25 i) upto 5 m height
14Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar in substructure complete as per drawings & MoRD technical specificationClauses 1002, 1005, 1010 and 1202.
15Plastering with cement mortar (1:4) 12 mm thick on brickwork / C.C. work including a finishing coat of neat cement punning with 2.75 Kg of cement per sqm in substructure as per MoRD technical specification Clauses 613.4 & 1204
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail