Rural Development Department has published Constructing Residential Quarters Type I For V.A.C. At Virgaon,And Constructing Residential Quarters Type I For V.A.C. At Virgaon (Remaining Construction Work)Tal.Akole . Submission Date for this Tender is 19-01-2022. Building Work Tenders in ahmednagar Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 Metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m)Spec. No.: Bd.A.1 Page No. 259 |
| 2 | Excavationforfoundationinhardmurumincluding removing the excavated materials upto distance of 50metresbeyondthebuildingareaandstackingand spreadingasdirected,dewatering,preparingthebed for the foundation and necessary back filling, ramming, wateringincludingshoringandstruttingetc.complete. (Lift upto 1.50 m) By Manual Means Spec. No.: Bd.A.2 Page No. 259 |
| 3 | Providing and laying in situ, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation andbeddingincluding bailing out water, formwork, compacting and curing complete, with Concretemixer, Spec. No.: Bd. E. 1 Page No. 287 |
| 4 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete. Spec. No.: Bd.A. 12 Page No. 264 |
| 5 | Filling in plinth and floors with contractors soil sand or murum in 15 cm to 20cm, layers including watering and compaction complete.Spec. No.: Bd.A.11 Page No. 26 |
| 6 | Providing and casting in situ cement concrete M-15 of trap / granite / quartzite / gneiss metal for Foundation including centering, formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete,with Concrete mixer. . Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 38 |
| 7 | Providing and laying in situ cement concreteM-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, with Concrete concrete mixer. With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 A) M-20 |
| 8 | Providing and casting in situ cement concrete M20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with Concrete concrete mixer. With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38 |
| 9 | Providing & casting in situ cement concrete M------ of trap / granite /quartzite/ gneissmetal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork,cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). withConcrete concretemixer With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38 |
| 10 | Providing & casting in situ cement concrete M20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with Concrete concrete mixer With natural sand. Spec. No.: Bd.F.9 Page No. 303 and B.7, Page No.38 |
| 11 | Providing and fixing fan hook box of 2 mm thick M.S. sheet rectangular size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface. Spec. No.: As directed by Engineer in charge |
| 12 | Providing and fixing in position TMT FE-500 bar reinforcement of various diaMetres for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. Spec. No.: BdF-17 Page No. 306. B) TMT steel from other plant. |
| 13 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in ---------- of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 A) foundations and plinth |
| 14 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in ---------- of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 C) Superstructure |
| 15 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diaMetre / 2 hoop iron strips 25 mm X 1.6 mm at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering Complete. Spec. No.: Bd.G.7 Page No. 316 |
| 16 | Providingandfixingboarddisplayinginformation,suchas"Nameofwork,Tendercost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x75cmincluding,excavation,refilling,transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge |
| 17 | Testing Charges of CC M20 Cube |
| 18 | Testing Charges of Bricks |
| 19 | Testing Charges of Sand |
| 20 | Royalty Charges for other than Sand |
| 21 | Providing and casting in situ cement concrete M20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with Concrete concrete mixer. With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38 |
| 22 | Providing & casting in situ cement concrete M------ of trap / granite /quartzite/ gneissmetal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork,cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). withConcrete concretemixer With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38 |
| 23 | Providing and casting in situ cement concrete M---- of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingscanopy, waist slab with steps as per detailed designs and drawings including centering, formwork,cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).withConcrete concretemixer With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38 |
| 24 | Providing and casting in situ cement concrete in M---- of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork,cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement). with Concrete mixerWith natural sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38 |
| 25 | Providing and fixing fan hook box of 2 mm thick M.S. sheet rectangular size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface. Spec. No.: As directed by Engineer in charge |
| 26 | Providing and fixing in position TMT FE-500 bar reinforcement of various diaMetres for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete. Spec. No.: BdF-17 Page No. 306. B) TMT steel from other plant. |
| 27 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in ---------- of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 C) Superstructure |
| 28 | Providing and laying telephone black / Amba White / Cadburybrown / RBI red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Specifications: Bd. M. 12 Spec. No.: As directed by Engineer-In- Charge |
| 29 | Providing and fixing solid core flush door shutter in single leaf 30 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No.: Bd-T-34, Page No. 499 |
| 30 | Providing and fixing 30 mm thick factory made PVC rigid foam paneled door shutters by approved manufacturer and brand by from MS tube of 19 gauge thickness size 19 mm x 19mm for styles and 15 mm x 15 mm for top and bottom rails, covered with heat moulded PVC C channel of 5 mm thick and 75 mm wide PVC sheet for top rail, lock rail and bottom rail on either side and 5 mm thick, 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5 mm thick PVC sheet fitted in the M.S frame welded/sealed to the styles and rails with 5mm x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc. complete as per manufacturers specification and direction of Engineer in charge fixed to the frames with stainless steel hinges of 125 mm size, and cromium plated fixtures including all material, labour, machinery etc. complete ( for WC, bath shutter) ( The item is exclusive of door frame) Spec. No.: As directed by Engineer in charge. |
| 31 | Providing and fixing in position (as per 1,868 / 1,982)Aluminium sliding window of three tracks with rectangular pipe 63 x 38.10 x 1.22 mm. at weight 0.650 kg/Rmt. with window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.20 mm at weight 0.417 kg/Rmt.. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.25 mm at weight 0.469 kg/Rmt. And handle section 52 x 18 x 1.13 mm at weight 0.488 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box. Spec. No.: IS: 1,948-2,006 and as directed by Engineer-in-charge. |
| 32 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No.: As directed by Engineer in charge. |
| 33 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg./sq.m. as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. Spec. No.: Bd.U.1 Page No. 53 |
| 34 | Providing and fixing chicken mesh jali (24 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc. complete. Spec. No.: As directed by Engineer in Charge: |
| 35 | Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 36 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing complete. Spec. No.: Bd.L.2 Page No. 368 |
| 37 | Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:4without neerufinish,to concrete,bricksurface,inallpositionsincludingscaffoldingandcuring etc.complete. Spec. No.: Bd.L.4 Page Number 368 |
| 38 | Providing and laying Rectified GlazedCeramic tiles of Somany/RAK/ Kajaria/ Nitco/ Asian or equivalent make of First quality (IS 15622) having size 30 cm x 30 cm of first quality of approved colour for flooring in required positionlaidonabedof1:4cementmortarincluding cement float, filling joint with white/colour cement slurry cleaning curing complete. Spec. No.: Bd.M.12 Page No. 385. |
| 39 | Providing and laying Rectified Glazed Ceramic tiles ofSomany/RAK/Kajaria/Nitco/Asianorequivalent make havingsize30cm.x30cm. offirstqualityof approved colour for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:3 cement mortar including joint filling with white/ colour cement slurry cleaning curing complete. Spec. No.: Bd.M.13 Page No. 386. |
| 40 | Providing and laying Mat finish Vitrified tiles of having size 590 mm to 590 to 605 mm x 590 to 605 mm (thickness to be specified by the manufacturer) and confirming IS. 15622-2006 of approved make, shade and pattern for skirting in required position with 1:3 cement mortar bedding including neat cement float, filling joints, curing and cleaning etc. complete. Spec. No.: Bd.M.12 Page No. 385 |
| 41 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Spec. No.: Bd. M.22 B/Page No. 390 |
| 42 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing complete. Specifications: Bd. M. 12 Spec. No.: Bd. M-12 |
| 43 | Providing and fixing Orissa type white glazed earthenware 580 x 440 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. Spec. No.: As directed by Engineer in charge. |
| 44 | Providing and fixing 10 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete. Spec. No.: As directed by Engineer in charge. |
| 45 | Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 565 |
| 46 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No.: Bd.V.38, Page No. 572 |
| 47 | Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. lid cover 65 kg with frame fixed in cement concrete etc. complete. Spec. No.: Bd.V.43, Page No. 574 |
| 48 | Providing and fixing 110mm diaMetre UPVC soil / vent / waste SWR pipe of required diaMetre conforming to IS-13592:1992, and IS-4985:2000 to withstand continuous internal hydraulic pressure of 4 kg / cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary Excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 49 | Providing and fixing 75mm diaMetre UPVC soil / vent / waste SWR pipe of required diaMetre conforming to IS-13592:1992, and IS-4985:2000 to withstand continuous internal hydraulic pressure of 4 kg / cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary Excavation, laying refilling, trench testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use) |
| 50 | Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting I/C fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. Concealed work, including chases and making good the wall etc. 15 mm nominal outer dia pipes. Spec. No.: As directed by Engineer in charge |
| 51 | Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting I/C fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. Concealed work, including chases and making good the wall etc. 25 mm nominal outer dia pipes. Spec. No.: As directed by Engineer in charge |
| 52 | Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.: Bd.V.9 Page No. 555 |
| 53 | Providing and fixing C.P. wall mixer with overhead shower with 115mm long bend pipe & wall flange jaquar make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge Note: To be executed only with prior permission of SE |
| 54 | Providing and fixing C.P. BIB cock with wall flange jaquar make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete Spec. No.: As directed by Engineer in charge Note: To be executed only with prior permission of SE/CE |
| 55 | Providing and fixing C.P. sink cock with raised J shaped swinging casted spout jaquar make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete. Spec. No.: As directed by Engineer in charge Note: To be executed only with prior permission of SE/CE |
| 56 | Providing and fixing stainless steel sink of size 600 x 510 x 200 mm of Nirali or equivalent make incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Spec. No.: As directed by Engineer in charge |
| 57 | Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diaMetre and 1.5mm thick at top,40mm diaMetre and 1.5mm thick vertical supports spaced at regular interval and three pipes of 15mm diaMetre fixed horizontally including fabricating ,fixtures, errecting , necessary welding , griding , finishing, buffing to stainless steel pipe etc. complete. Spec. No.: As directed by Engineer Incharge |
| 58 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete Spec. No.: As directed by Engineer in charge. |
| 59 | Providing and fixing chromium plated towal rod 16 mm dia and 75 cm. in length including all accessories complete. Spec. No.: As directed by Engineer in charge. |
| 60 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. Spec. No.: As directed by Engineer in charge. |
| 61 | Providingandapplyingwashableoil-bounddistemperofapproved colourand shadetooldand new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Spec. No.: As directed by Engineer in charge |
| 62 | Providingandapplyingtwocoatsofwaterproofcementpaintofapprovedmanufactureandofapproved colourtotheplasteredsurfacesincludingscaffoldingifnecessary,cleaningandpreparingthesurface, watering for two days etc.complete. |
| 63 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. Spec. No.: Bd.V.46, Page No. 576 |
| 64 | Providing and preparing kitchen otta made up from 30 mm thick and 75 cm. wide one side polished kadppa top 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. ( Mode of measurement is Plan of Otta ) Spec. No.: Bd.M.35C / Page No. 393 |
| 65 | Providing and fixing H.D.P container Sintex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres Spec. No.: As directed by engineer-in-charge. |
| 66 | Providingandfixingboarddisplayinginformation,suchas"Nameofwork,Tendercost, Name of Contractor, Work completion and liability period etc", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x75cmincluding,excavation,refilling,transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge |
| 67 | Testing Charges of CC M20 Cube |
| 68 | Testing Charges of Bricks |
| 69 | Testing Charges of Sand |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
