Directorate Of Municipal Administration-DMA has published Proposed Construction Of Ashurkhana Building At Proposed Construction Of Ashurkhana Building At Bishti Galli Under Special Grant For Vaishishtyapurn Works For Muncipal C Ouncil Ahmedpur. Submission Date for this Tender is 27-01-2022. Building Work Tenders in ahmedpur Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | BUILDING |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) SSR 2021-22 ITEM NO. 21.02 & PAGE NO.115 |
| 3 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97%of standard proctor density for a lead of 300 m. to 500 m. inclusive, from the site of excavation to the site of deposition as directed.SSR 2021-22 ITEM NO.2.26 & PAGE NO.24 |
| 4 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.50 m) SSR 2021-22 ITEM NO. 21.06 & PAGE NO.115 |
| 5 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) SSR 2021-22 ITEM NO. 21.14 & PAGE NO.116 |
| 6 | Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. SSR 2021-22 ITEM NO. 21.36 & PAGE NO.117 |
| 7 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including wateringand compaction etc. complete. SSR 2021-22 ITEM NO. 21.37 & PAGE NO.152 |
| 8 | Providing dry/ trap/granite/ quartzite/gneiss rubble stone soling 15cm to20 cm thick including hand packing and compacting etc.complete. SSR 2021-22 ITEM NO. 21.38 & PAGE NO.117 |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand SSR 2021-22 ITEM NO. 24.01 & PAGE NO.169 |
| 10 | Providing and laying in situ/Ready Mixcement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water, formwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 2021-22 ITEM NO. 25.11 & PAGE NO.133 |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 2021-22 ITEM NO. 25.31 & PAGE NO.134 |
| 12 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 2021-22 ITEM NO. 25.5 & PAGE NO.175 |
| 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandSSR 2021-22 ITEM NO. 25.70 & PAGE NO.176 |
| 14 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-20 of trap/ quartzite/ granite/ gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/ pumping, compaction, finishing uneven and honey combed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic ,tarpaulin etc.)with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)SSR 2021-22 ITEM NO. 26.25 & PAGE NO.138 |
| 15 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 2021-22 ITEM NO. 26.33 & PAGE NO.139 |
| 16 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. SSR 2021-22 ITEM NO. 27.01 & PAGE NO.144 |
| 17 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR 2021-22 ITEM NO. 27.05 & PAGE NO.144 |
| 18 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete SSR 2021-22 ITEM NO. 32.06 & PAGE NO.153 |
| 19 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.SSR 2021-22 ITEM NO. 32.11 & PAGE NO.201 |
| 20 | Providing and applying priming coat on concrete /masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.SSR 2021-22 ITEM NO. 35.21 & PAGE NO.165 |
| 21 | Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.SSR 2021-22 ITEM N. 39.29 & PAGE NO.239 |
| 22 | Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete SSR 2021-22 ITEM NO. 39.58 & PAGE NO.246 |
| 23 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. BASIC RATE AS PER SSR OF 2021-22ITEM NO. 40.01 & PAGE NO.329 |
| 24 | Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M.1:6 including filling joints with polymer base filler nosing/ moulding the sharp edges wherever necessary, curing, etc. complete. SSR 2021-22 ITEM NO. 33.48& PAGE NO.210 |
| 25 | Providing and fixing Country cut teak wood single leaf panelled door shutter with out fan light and 25 mm thick as per drawing consisting of T.W. top rail size 100 mm x 25 mm and bottom lock rail 200 mm x 25 mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol for maldehyde synthetic resin (Generally confirming toISI3097)excluding frame ,including stainless steel fixture and fastening and T.W. beading to junction s of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. SSR 2021-22 ITEM NO. 39.05 & PAGE NO.253 |
| 26 | In SSR for items of supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates. For the items of sand and crushed metal rates are inclusive of royalty charges.Prevalent Royalty charges shall be separately considered while preparing estimate and shall bepart of Schedule-B of tender.Any revision in Royalty charges shall be included in the rate analysis of the respective item. If there is variation in Royalty charges the difference shall be paid extra over the items to the contractor and shall be recovered if the Royalty rates are reduced by Govt.i.e Revenue department[As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.67 Dt.15 May,2015. States that the royalty charges ofRs.141.34/Cu.M. ) are considered. FOR SAND |
| 27 | FOR OTHER MATERIAL |
| 28 | Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender.testing of material by Quality control and certified quality must be use by contractor. Compressive strength of C.C.Cube (Set of 3 cubes) |
| 29 | CONCRETE MIX DESIGN |
| 30 | BASIC TEST OF CEMENTStandard Consistency Fineness,Specific Gravity, Setting Time ( Initial & Final), Compressive Strength, Soundness |
| 31 | STEEL TENSILE STRENGTH, % ELONGATIUON ,YIELD STRESS, WEIGHT PER METER,BEND/REVEND TEST,PROFF STRESS(6MM TO 16MM STEEL BAR) |
| 32 | BASIC TEST OF AGGREGATE Water Absorption, Specific Gravity, Impact Value, Crushing Value |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
