Assam Agricultural University has published Construction Of Wet Laboratory At College Of Fisheries, Raha Under Assam Agricultural University Under Tneif. Submission Date for this Tender is 03-02-2022. Civil Work Tenders in jorhat Assam. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | A) Civil Works:- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
4 | Providingandlayingdamp-proofcourse40mmthickwithcement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) |
5 | Providing and laying in position specified grade of reinforced cement concrete,excludingthecostofcentering,shuttering,finishingand reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) |
6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishingandreinforcementwith1:1.5:3(1cement:1.5coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
7 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
8 | Suspended floors, roofs, landings, balconies and access platform |
9 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
10 | Columns, Pillars, Piers, Abutments, Posts and Struts |
11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
13 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand) |
14 | Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
15 | Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
17 | Providing and fixing ISI marked flush door shutters conforming to IS 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
18 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
19 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10 mm |
20 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm |
21 | Providing and fixing glazing in aluminium door,window,ventilator shutters and partition etc …..with float glass panes of 5mm thickness |
22 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
24 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 m |
25 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cementslurryadmixedwithpigmentofmatchingshadeincluding rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
26 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
27 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer |
28 | Finishing walls with textured exterior paint of required shade : |
29 | Two or more coats on new work |
30 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
31 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately |
32 | FRP Tank with all assesories of size 2000 mm dia |
33 | Supplying and providing Pea Gravel for filtration unit as directed by department |
34 | Providing wood coil for filtration unit |
35 | Providing Plastic net bellow sand layer for filtration unit |
36 | Transportation of Drilling Rig and other equipments, assembly pipe etc. to the site |
37 | Drilling bore hole by pneumatic DTH Rig in hard rock as directed by the Department |
38 | Supply and installation of 6mm thick 300 mm diameters PVC outer casing pipe as directed by the department |
39 | Supply and installation of ERW 4.35mm thickness 200mm diameters casing pipe as directed by the Department |
40 | Lowering and lifting of casing pipe |
41 | Development of Deep tube well by air compressor through Rig(Mechanical means) |
42 | Providing fitting and fixing 8mm steel wire rope for holding the submersible pump as Directed by the Department |
43 | Providing supporting clamp as directed |
44 | Providing MS well cap of size 200mmx200mm and fixed as directed by the Department |
45 | B)Water Supply Works:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes |
46 | 32 mm nominal dia Pipes |
47 | 50 mm nominal dia Pipes |
48 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
49 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
50 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a)White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
51 | 450mmlongtowelrailwithtotallengthof495mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
52 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
53 | Providing and fixing mirror of superior glass (of approved quality) and 40 mm dia |
54 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved Rectangular shape 453x357 mm |
55 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter |
56 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia |
57 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore |
58 | 32 mm nominal bore. |
59 | 50 mm nominal bore |
60 | PCVC Syntex water tank of 2000 lit capacity |
61 | C)Electrical Works:- Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable(Finolex /RR Kabel /Nicco / Anchor) PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/)as approved by the Deptt. including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit. |
62 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cablein 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit. |
63 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cableb(Finolex /RR Kabel /Nicco / Anchor) in PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab) as approved by the Deptt. |
64 | Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable(Finolex /RR Kabel /Nicco / Anchor or Equivalent Make in surface/ recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete Short point up to 3.00 metre. length. |
65 | 2.11.2 : Medium point up to 6.00 metre. Length. |
66 | 2.11.3 : Long point up to 10.00 metre. Length. |
67 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable(Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessedconduit wiring system including earth continuity with 2.5 sq. mm cableto the 3rd pin of the socketas required complete with20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) Medium point up to 6.00 metre. Length. |
68 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessedsystem complete as per direction of department. SB 8.34.4 : 6-8 module type Metal |
69 | SB 8.34.6 : 12-16 module type Metal |
70 | Supplying including fitting fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. SB 8.37.7 : 8 module |
71 | SB 8.37.9 : 16 module |
72 | Supplying with fitting fixing of 6 amp one way modular clip in bell push with LED MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. |
73 | Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYLINC), ANCHOR (ROMA), MK (IVORY), ABB (CLASSIC), KOLORS (KRAZE), SCHNEIDER (OPAL), PHILIPS, Havells including making necessary connection as per direction of department. |
74 | Supplying with fitting and fixing sheet steel, phosphatised, powder painteddust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.8.1.2 : 6 way TPN (4+18)double door |
75 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.1.1 : B Series (Schneider MG, legrand, Hagermake) 16.1.1.1 : 6 to 32A |
76 | Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 2nos DP or TPN out going of the following electrical items: 1. 20mm X 3mm 4 strip copper Bus-Bar 0.5M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5- 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5- 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no 5. Voltmeter & Ammeter Selector Switch- 2 no 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) |
77 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.6.2 : C Series (ABB, Schneider MG, legrand, Hagermake) 16.6.2.3 : 63A |
78 | 16.6.2.5 : 100A |
79 | Supplying including fitting fixing of followingA.C. Ceiling fan complete with all accessories...as required complete and as directed by the Department [Without regulator]. 27.1.3 : Premium model1400 mm Sweep. (ORIENT PPO/Havellsmake etc.. |
80 | Supplying with fitting & fixing ceiling fan regulator… 27.6.2 : Electronic type |
81 | Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories as approved by the Deptt. 23.1.1 : Striplite luminaries complete with VPIT copper ballast and 1 X 18 / 20 wattFluorescent tube. |
82 | Supplying including fitting fixing of followingA.C. Exhaust fan as approved by the Deptt. 27.2.1 : Domestic 27.2.1.2 : Power Flow225 mm sweep (ORIENTmake) |
83 | Supply, installation & testing of G.I. Plate earth station with600 mmx600 mmx6 mm heavy duty G.I. earth plate…. as specified and directed by the deptt . |
84 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV GSolid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, Under Ground Armoured cable... as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .32.1.4 : 4 Core A2XWY A2XFY 32.1.4.6 : 35.00 Sq.mm.4 Core armoured U.G. cable |
85 | Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET3 (Three Phase)with steel cable rope and submersible cable complete as directed and specified by the deptt. 39.7.6 : Three phase Submersible motor pump set(Texmo / Crompton Greaves/ Aquatic/ CRI) 5 HP STAGE 14 to 50 with MCB controlled Submersible motor pump setcontrol panel. |
86 | Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical outdoor type double door, floor mounting compartmentalize panel board as specified and directed by the deptt. confirming to IP 65 protection comprising of the following electrical items: 1. 40mm X 5mm (4X2)strip copper Bus-Bar 0.20M length each 2. Digital 3 Phase Voltmeter Accuracy class 0.5- 1 no 3. Digital 3 Phase Ammeter Accuracy class 0.5- 1 no 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no 5. Voltmeter & Ammeter Selector Switch- 2 no 6. 2 A Slide fuse unit - 3nos (Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) |
87 | Supplying with fitting and fixing panel mounting open execution 415V 50Hz 4P MCCB with Microprocessor Release (Ics=Icu, adjustable Over Load and Short Circuit setting, Without enclosureof the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.21.1 : 36KA(ABB, Schneider, legrand, L&T, Siemens, C&Smake) 16.21.1.3 : 100A |
88 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV GSolid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour 650/1100V grade as per IS 7908(Part 1)1988 armoured U.G. cable as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 32.1.3 : 3 & 1/2 Core A2XFY 32.1.3.1 : 25.00 Sq.mm.3 & 1/2 Core armoured U.G. cable |
89 | 32.1.3.2 : 35.00 Sq.mm.3 & 1/2 Core armoured U.G. cable |
90 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long as specified and directed by the deptt . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail