Agra Municipal Corporation has published Repairing Work In Sadar Bhatti Nandram Situated Ambedkar Bhawan Sr No 16 Zone-4. Submission Date for this Tender is 13-01-2022. Building Work Tenders in AGRa Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantiling birck work or stone work in lime or cement mortar and including stacking ofmaterials as directed by E/IC with in a distance of 60meters (200 feets). (17-Chapter PWD. No.692)PWD Sheduled 2019-20 |
2 | Cleaning of the site for warkable etc. All complete. (Non Scheduled) |
3 | M-150 in 1:3 with cement and coarse sand in Sub structure for 12cm. thick wall including supply of all material labour T & P etc. required for proper completion of work. {Chapter No.6 Si No.307+310(A)} |
4 | M-150 Brick work in 1:4 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work in super structure above plinth level upto floor five levels. (SI No. 305+309) |
5 | R.c.c work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:2:4 in R.cc Slab supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150.(5-Chapter S.I. No.-284) |
6 | R.C.C. work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc. and also including supply of all materials labor and tools and plants etc. required for proper completion of the work. Strength of the concrete shall not be less than M-150 and R.C.C.T. Beam and slab roof and R.C.C. column. (SI No. 10-5.12) |
7 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in and an overall rates) brought for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (b) 10mm to 12mm tor. (Chapter No. 10 S.I. No. 504(B)) |
8 | 12mmcement plaster in single coat on rough site of single of half brick wall for interior plastering up to floor to level including internal rounded angles not excluding 80mm in girth and finished even and smooth. (b) 1cement : 4 Coarse sand. (Chapter No.13 Si.No. 583 (iii)) |
9 | Mild steel of iron in heavy size such as trusses built up gates record reck, roof work gates etc. brought to required form including drilling holes revitting are welding where neccesary, and also including supply of steel bolts , nuts wastage etc. and there fixing required for completion of the work. (Chapter No.10 S.I. No.503) |
10 | Providing and fixing in position collapsible steel shutters with vertical channels 20.10.2mm and braced with top an bottom rails of Trion 40.40.6mm with 38mm dia steel pulleys with bolts, nuts locking arrangement, stoppers, handles complete including applying a priming coat of approved lead paint. (Chapter No.10 Si.No.4-518) |
11 | Supply & fixing of flush doors, commercial quality conforming of I.S. 2202 part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplies deparmentally. (a) 30mm thick. {Chapter No.09 S.I.No. 470(b)} |
12 | Finishing walls putty approved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all materials. (S. No. 27 New) |
13 | Supply and Fixing Oxided Iron Fitting etc. all complete (None Scheduled) |
14 | Providing and fixing of door & ventilater etc. all complete. (DSR No. 9.6.1) |
15 | Paint of the two coat over priming coat including cost of priming coat new steel gril etc. all complete.(15-Chapter Sr.No.1a+2a+642) |
16 | Supply and fixing 6mm (1/4") thick chine white glazed tiles in flooring or dadolaid with 1:3 cement and approved coarse sand mortar and approved coarse sand mortar finished with whitecement jointed and polishing complete including supply of all materials, labor for porper completion of the work. (Chapter No.14 S.I. No. 628) |
17 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc. (d) 25mm nominal outer dia pipes.(Chapter No.23 SI.No.8C) |
18 | Supply & Fixing of brass Bib Cock of approve quality etc. all complete. (Chapter No.21 Si.No.43) |
19 | Supply & Fixing of C.P. brass Stop Cock (Conceled) of Standerd design of approve quality etc. all complete. (Chapter No.21 Si.No.44) |
20 | Providing and Laying Vitrified Tiles 500x500mm Size(thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand manufacture, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints etc. all complete. (Chapter No.14 Sr.No.13 New Item) |
21 | Supply and Fixing of Light Fitting Switch Board. (None Sheduled) |
22 | Supply and Fixing Wiring of Light Point. (None Sheduled) |
23 | S/L/J of 20mm dia PVC Cunduct Pipe etc. all complete. |
24 | Supply & Fixing of wiring Sub Main. |
25 | Supply & Fixing of Plug Point 15mm. |
26 | Lettering & Painting of wall etc. all complete. |
27 | Supply & Fixing of 27watt. CFL etc. all complete. |
28 | Providing & fixing stainless steel (Grade 304) raiding made of hollow tubes channels plates etc. including welding grinding, buffering polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolt complete, i/cfixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc, of required size on the top of the floor or the side of slab with suitable arrangement as per approval of Engineer in-charge, (of payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
29 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufactured and of required shade and undecorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer applied @ 0.75Ltr./10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work for two coat. |
30 | Painting Two coats Over Priming coat (but excluding cost of priming coat) on New wood surfaces and other metal surfaces upto 10cm. Width or girth or small articles not exceeding 0.10 Sq.M. in Area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superiac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. (Chapter No. 15 S.I. No.1(b)+2(b) new+642) |
31 | Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & Cold Water Supply, including all CPVC Plain & brass threaded fittings I/c fixing the pipe with clamps at 1.00 m spacing, This includes Jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, complete as per direction of Engineer-in-Charge. Concealed work, of including cutting chases and making good the wall etc. (A)15mm nominal outer dia pipes. (Chapter No.23 Si.No.8A) |
32 | Supply and fixing 500 liter Pvc. sintex water tank etc. All complete. (19-Chapter Sr.No.2(c)) |
33 | Sub Total (A) |
34 | Deduction Cost of Material Old workable bricks etc. all complete. |
35 | Diduction of cost brick/bats. (Chapter No.1 Sr.No.2(c)) |
36 | Sub Total (A) |
37 | Sub Total (A-B) |
38 | Add 12% G.S.T. |
39 | Sub Total |
40 | Add/Deduction Rs. For Estimate Figure Amount Match |
41 | Grand Total |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail