Department Of Local Bodies has published Supply And Installation Of Led Street Light, Street Light Extension At Various Palace And High Mask Light Supplying And Fixing At Various Palace In Municipal Board Asind. Supply And Installation Of Led Street Light, Street Light Extension At Various Palac. Submission Date for this Tender is 24-01-2022. Street Lighting Tenders in asind Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Part-A |
| 2 | Supply and erection of P.C.C./R.C.C. pole as per REC manual no 15/1979 conforming to IS: 2905/1966 as per requirement of sec3 in alignment, including excavation of pit and back filling with stone aggregate/boulders and soil in 0.45m consolidating each deposited layer of 0.45m by ramming and watering etc complete in all respect |
| 3 | 8.0 Mtr long (200 Kg) as per Discom specification |
| 4 | Supply and fixing of cross arms as per Discom specification, made out from angle iron 50mmx 50mmx6mm including all necessary nuts,bolts & clamp etc as reqd. |
| 5 | LT Bracket with clamp 600 mm long |
| 6 | Supply and fixing of porcelain shackle insulator as per IS:1443 1979 suitable for working on 1100 volts including hot dipped GI accessories and heavy duty hardwares etc as required as per Discom specification. |
| 7 | 75mm x 90mm |
| 8 | Supply and fixing of LT porcelain pin insulator as per IS 1445-1997 suitable for working voltage 1100 volts including all accessories like hot dip GI forged spindle of 260mm long and nuts etc as reqd as per Discom specification. |
| 9 | 105mm x 65mm |
| 10 | Supply and eraction of GI stay set as per Discom specification complete with long stay rod with anchor plate including stay clamps turn buckle and G.I stay wire tightened through strain insulator including excavation of pit-re-filling etc & exculding cement concrete |
| 11 | Stay set of dia 16mm,1.8m long stay rod and anchor plate 300x300x6.4mm |
| 12 | Supplying and drawing of XLPE insulated LT bunched Aluminium conductor cable confirming to IS 14255/1995 and IS 398 (Pt-4)/1994 on existing cross arms through I hook with all necessary T&P required including binding and twisting etc. complete in all respect as required as per Discom specification. |
| 13 | 1 X 25sq. mm + 1 X 25 sq. mm (Insulated) |
| 14 | Part-B |
| 15 | Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. |
| 16 | 8 Mtr. |
| 17 | Supply, Erection and Fixing of hot dipped galvanised Overhang (60 X 3.25 mm) with cap (250 x 137.9 x 4.05 mm) over the existing poles |
| 18 | Double arm overhang |
| 19 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. |
| 20 | 2 x 2.5 sq.mm |
| 21 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. |
| 22 | Single pole MCB 6 A to 32 A rating |
| 23 | Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. |
| 24 | 10.0 Sq.mm 4 core |
| 25 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. |
| 26 | 8 SWG G.I. Wire |
| 27 | S&Laying following size" A" class G.I. Pipe with accessories for laying earth conductor/strip in ground/surface/recess as required |
| 28 | 50 mm dia. |
| 29 | P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. Group I |
| 30 | LED street light fixture 72 Watt |
| 31 | Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound(CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating |
| 32 | G.I. pipe 2000 mm long , 80/40 mm , terminal 12 mm G.I. strip |
| 33 | Providing and Fixing of piller box for street light with 2 mm CRCA sheet steel, 63 amp LT disconnectors switch fuse units ,bakelite sheet ,insulators ,connectors,etc as required size500mm x100mmx 375mm with tapered top |
| 34 | Part-C |
| 35 | P&F of high mast lighting system (as per CP3-TR7/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 9 nos luminaries, with welded arm, mast head fraime assembly, with ful cover aviation obstruction lights, double drum type self sustaining wnich, integral power tool accessible from door with padlocking arrangement (winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening final, suitable ropes (AISI 316,7/19 Costruction), EPR insulated PCP sheathed trealling cable outdoor type control panel for auto on/off reverse forward motor operation and CC foundation of M-15 grad complete as required. The mast is constructed from mild steel plates (as per IS 5986 Gr.510) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. The complete work shall be supervised and certified by the manufactures for satisfactory supply, erection, testing and commissioning of high mast. ( See table E-13 for specs. ) 12.5 mtr. H. (In two section) Group - I |
| 36 | P&F IP – 65 protected High Power LED Flood light system with extruded aluminium housing toughened glass diffuser suitable lenses on LED to achieve varios beam angles, 240V,50Hz-High power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standerd. System life of 25,000 Buring Hours with 70% of initial Lumens Maintained. Light output in cool white or Warm White colour as per engineers choice. Fixutures shall be CE and compliance. High power LED Flood Light 120W Group - I |
| 37 | Pipe Earthing as per IS:3043 with perforated 3.0 Mtr. Long, 40mm dia. “B” class G.I. Pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. cover, C.I. frame of size 300mm x 300mm and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance as required. |
| 38 | P/Laying P.V.C. insulated & P.V.C. sheathedcable of 1.1 KV grade with aluminum conductor of IS: 1554P-I of Group 2 of approved make in ground as per IS: 1255 including excavation of 30cm x 75cm size trench, 25 cm thick under layer of sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 16 Sq. mm 4 core (ARM cable) |
| 39 | S & F following size ‘B’ class G.I. Pipe confirming to IS : 1239 P – 1 (1990) with accessories for laying earth conductor/strip cable in ground/ surface as required 40mm. |
| 40 | Supplying and drawing FR PVC insulated & unsheathed flexing copper conductor ISI marked(IS:694) of 1.1 kv grade and approved make in exisiting surface or making connection etc . as required. 2X1.5 sq.mm |
| 41 | Part-D |
| 42 | Earth work in excavation for roadway, including trimming bottom and side slopes in accordance with requirement of line, grades and cross sections, including disposal of surplus material with all lift and lead upto 1000 metre as per MoRT&H specification clause 301. |
| 43 | Carriage of Materials by mechanical transport including loading, unloading and stacking :: Earth |
| 44 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:5:10 (1 Cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size). |
| 45 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:2:4 (1 Cement : 2 fine/ coarse sand : 4 graded stone aggregate 40 mm nominal size). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
