Municipal Corporation-MC has published Construction Of Automated Puzzle Parking System Including Supply, Installation, Testing, Commissioning And Operation And Maintenance For 225 Ecs Cars At Punjabi Bagh Crematorium In West Zone Sdmc Construction Of Automated Puzzle Parking System Includin. Submission Date for this Tender is 04-02-2022. Parking System Tenders in Delhi. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 19-Jan-2022 | PRE-BID QUERIES AND THEIR REPLIES | Other | 04-02-2022 |
Sl. No. | Item Description |
1 | CIVIL WORK ANNEUXRE-B |
2 | Providing & Fixing of 8mm thick Heat Reflective toughened Glass of Saint Gobain / Glaverbel of approved colour & make complete with wastages, installation, loading, un-loading, stacking and carrying to all heights & levels as required. |
3 | Providing & fixing UV resistant multiwalled (twin walled) 16 mm thicktranslucent, clear or pigmented polycarbonate sheet roofing conforming to IS 14443: 1997 on steel structure with 50 micron polyster powder coatedapproved alcox aluminiumsection at the joints spaced @1.0 m to 1.20 m c/c as approved by Engineer-in-Charge and weather proof Neoprin/EPDM rubber gasket to make the whole structure waterproof fixed with self drilling screws 50 mm long with neoprin washers at least 15 cm centre to centre or at designed spacing including bending of polycarbonate sheet and alcox section to the required curvature and applying silicon sealant to seal the jointsand fixing aluminium U-section of required section to the edges of the sheet for protecting it from breakage etc. with 20 mm long self drilling screws with neoprin washers at least 15 cm C/Cand neoprin/EPDM rubber gasketcomplete as per direction of Engineer-in-Charge.Engineer including necessary scaffolding uptoany height complete (Supporting steel structure /aluminium sectionsto be paid for separately) |
4 | CHINAWARE FIXTURES |
5 | Supply fixing and installation of 12 mm thick frosted toughned glass partition for urinal as per architects design. ( size approx 2.5"X1.5") |
6 | CHROME PLATED FITTINGS |
7 | Providing and installation Stainless Steel round jali 125 mmas per approved make : |
8 | ELECTRICAL WORK ANNEUXRE-C |
9 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) |
10 | 8 way, Double door |
11 | 12 way, Double door |
12 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
13 | Single Pole |
14 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
15 | 40 A |
16 | Supplying and fixing following rating, four pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
17 | 63 A |
18 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
19 | Providing & fixing of M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required. |
20 | CIRCUIT CUM POINT WIRING |
21 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
22 | Group C |
23 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS, PVC insulated copper conductor single core cable in surface/ recessed conduit with modular switch modular plate suitable GI box and earthingthe point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc.as required. |
24 | Group C |
25 | Wiring for Light/ power plug points with 2 x 4 sq.mm. FRLS, PVC insulated, Cu. Conductor, single core cable in surface/ recessed conduit along with 1 No. 4sq.mm. FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
26 | Wiring for circuit/ submain wiring alongwith earth wire with the follwing size of FRLS PVC Insulated copper conductor single core cable in surface/ recess steel conduit as required. |
27 | 2x 2.5 sqmm+ 1x 2.5 sqmm earth wire |
28 | 2x 6 sqmm+ 1x 6 sqmm earth wire |
29 | Supplying and fixingsuitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing3 pin 5/6 Amp modular socket outlet and 5/6 A modular type switch, connections painting etc. as required.(For light plugs to be used in non residential buildings). |
30 | Supplying and fixing suitable size Gl box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc. as required. |
31 | Supplying and fixing of Stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
32 | Sub-Total |
33 | EARTHING |
34 | Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry "enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
35 | Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick includingaccesssories, and providingmasonary enclosurewith cover plate having locking arrangement and watering pipe 2.7 mtr lenght etc. with charcoal or coke and salt as required. |
36 | Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. |
37 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
38 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
39 | Providing and fixing 25mm x 5mm GI Strip on surface or in recess for connections etc. as required. |
40 | Providing and fixing 6SWG dia GI Wire on surface or in recess for loop earthing as required. |
41 | CABLE TRAY |
42 | Supplying and installing following size of perforated Hot Dipped Glvanised Iron cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts etc. as required. |
43 | 150 mm width X 50 mm depth X 1.6 mm thickness |
44 | 300 mm width X 50 mm depth X 1.6 mm thickness |
45 | Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard desgin: |
46 | 0.91 m deep with SFRC cover and frame (heavy duty, HD20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)including centering, shuttering all complete.(Excavation,foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
47 | LT Cable Termination |
48 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed I XLPE aluminium conductor cable of 1.1 kV grade as required. |
49 | 3½ X240 sq. mm (62mm) |
50 | 3½ X120 sq. mm (45mm) |
51 | 3½ X50 sq. mm (35mm) |
52 | 4 X 16 sq. mm (28mm) |
53 | LAYING OF L.T CABLE |
54 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. |
55 | Upto 35 sq. mm |
56 | Above 35 sq. mm and upto 95 sq. mm |
57 | Above 95 sq. mm and upto 185 sq. mm |
58 | Above 185 sq. mm and upto 400 sq. mm |
59 | MCDApproved Rate |
60 | LT CABLES |
61 | Supplying of under noted sizes ofXLPE insulated, PVC sheathed armoured cable 1.1KV grade conforming to IS-7098 of following size:- |
62 | 3½ X 240 sq. mm(Aluminium Armoured) |
63 | 3½ X 120 sq. mm(Aluminium Armoured) |
64 | 3½ X 50 sq.mm (Aluminium Armoured) |
65 | 4 X16 sq.mm (Aluminium Armoured) |
66 | SUPPLY OF LIGHT FIXTURES |
67 | S/IT/C of LED Tube type luminaire 20 watt rating complete with extruded Aluminium Batten prewired with high efficient LEDs withthe following: a) Total system wattage 20 watt +/- 5% c)Luminous efficacy lumens/watt >=95 d) Power factor >=0.95 |
68 | S/IT/C of LED Tubelight lamp20 watt rating made up of extruded Aluminium Batten prewired with high efficient LEDs withthe following: a) Total system wattage 20 watt +/- 5% c)Luminous efficacy lumens/watt >=95 d) Power factor >=0.95 |
69 | S/IT/C of 72 wattLED streetluminaire fitted with lens, made of pressure die cast aluminiun housing & toughened glass cover completed with the following specification as required: b) Total system wattage 8 watt +/- 72% d)Luminous efficacy lumens/watt >=100 e) Power factor >=0.95 f) protection class IP-66 |
70 | Fabrication ,supplying and fixing class B galavanised single overhang arm bracket made out of 250mm long glavanised top tube with cap & 250 mm long 32mm dia galvanised pipe with tightening bolts complete as required |
71 | CCTV SYSTEM WORKS |
72 | Supply, installation, testing and commissioning of 2MP fixed lens Dome IP Camera with following specilications: Image Sensor: 1/3 2MP CMOS or better** Minimum Illumination: 0.08 lux color. 0 lux with IR or better ** Shutter Speed: 1/3 - 1/100.000 s Frame Rate: 1-25/30 fps or better ** Lens: 2.8mm fixed Video Compression: H.265 or better ** SN Ratio: >45 DB Resolution: (1920x1080) or better ** Protocol should comply to IPV4/v6, TCP/IP. HTTP. HTTPS. FTP. PPPOE, DDNS, IEEE802.1X IR Range: Minimum 25m Operating Temperature: -20 to 50 deg Cent Weatherproof Standard: IP66 or better ** Safety standard: UL |
73 | Supply , Installation , Testing and Commissioning of 4MP Varifocal lens Dome IP Camera with following specilications: Image Sensor: 1/3 4MP CMOS Minimum Illumination: 0.05 lux color, 0 lux with IR or better ** Shutter Speed:1/3 - 1/100.000 s Frame Rate: 20 fps or better ** Lens: 3.6 to 10 mm Varifocal lens Video Compression: H.265 or better ** SN Ratio: 45dB Resolution: (2650x1440) or better ** Protocol: should comply to IPv4/v6. TCP/IP, HTTP, HTTPS, FTP, PPPOE.DDNS, IEEE802.1X IR Range: Minimum 30m Operating Temperature: -20 to 50 deg Cent Weatherproof Standard:1P66 or better ** Safety standard: UL |
74 | Supply , Installation , Testing and Commissioning of 4MP verifocal lens Bullet IP Camera with following specilications: Image Sensor: 1/3 4MP CMOS Minimum Illumination: 0.05 lux color, 0 lux with IR or better ** Shutter Speed:1/3 - 1/100.000 s Frame Rate: 20 fps or better ** Lens: 3.6 to 10 mm Varifocal lens Video Compression: H.265 or better ** SN Ratio: 45dB Resolution: (2650x1440) or better ** Protocol: should comply to IPv4/v6. TCP/IP, HTTP, HTTPS, FTP, PPPOE.DDNS, IEEE802.1X IR Range: Minimum 30m Operating Temperature: -20 to 55 deg Cent Weatherproof Standard:1P66 or better ** Safety standard: UL |
75 | Supply, installation, testing and commissioning of 8 channel NVR with the following specifications: Camera resolution; up to 8 MP Interface ; 1HDMI 1VGA minimum Compression; H.265 or better Network Throughput :80Mbps or better** USB Port: 2 USB port (USB2.0)minimum Hard disk interface: I SATA port suitable for 6TB each Protocol: TCP/IP, HTTP, HTTPS, FTP,PPPOE.DDNS Operating temp: -10 to 55 deg Cent Safety standard: UL |
76 | Supply, installation, testing and commissioning of 8port Giga PoE switch 8(Poe 10/100)+2(10/100)port long distance switch. |
77 | Supply, installation, testing and commissioning of 6 TB surveillance HDD. |
78 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/recessed steel/ PVC conduit as required. |
79 | 4 pair UTP CAT 6- 1 run of Cable |
80 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including pasting in case of surface conductor cutting wall and making good in case of recessed conduit as required. |
81 | 25mm |
82 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS: 374 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
83 | Supply of 15" (380mm) sweep 1400 rpm exhaust fan heavy duty complete with shutter, blade etc as required. |
84 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required |
85 | Upto 450 mm sweep |
86 | SOLAR PANEL WORKS |
87 | Supply,Installation,Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a)Solar Photovoltaic Module of capacity 330W porabove, manufactured in India, conforming to IS 14286/IEC61215,IS/IEC61730-Part-1, IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5% .PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% attheend of 10 years and 80% attheendof 25 years. b)Power Conditioning Unit(PCU) o f350-800 V DC Input voltagerangeand 400 V AC, three phase,4 wire, 50 Hz +/ -2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97 % ,total harmonic distortion less than 3% and suitable for ambient temperature from 0to50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d)Fixing of Array junction box & Main junction box with IP 65protection and termination arrangement for incoming and outgoing cable along with glands ,lugsand other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Inter connections by supplying & fixing required size XLPE insulated copper conductor 1.1kV grade armoured power and control cables between solar modules ,main power cable to grid supply PCU unit along with supplying &fixing of necessary channel/conduit lugs and other accessories etc. as required. |
88 | MISCELLANEOUS ITEMS |
89 | Supplying and fixing of non-skid rubber mat of 1.1 KV dielectric strength900mm width ISI approved as required including cutting to required lengths. |
90 | Supplying of 1.1 KV hand gloves as required. |
91 | Supplying of first aid box as approved complete with standard kit as prescribed by Indian Red Cross. |
92 | Supplying and fixing of shock treatment chart written in English and Hindi duly framed in as required. |
93 | LIGHTNING ARRESTOR |
94 | Supplying, Erection, Installation, Testing & commissioning ofESE type Lightning Protection complete with the Lightning Air TeMeterinal - Configured as a. Insulation material used to electrically isolate the panels shall be comprised of a base polymer which provides high Ozone & UV resistance with a di-electric strength of 24-38 kv/mm & ESE teMeterinal shall with-stand a minimum Switching Impulse Voltage of 500 KV tested as per NFC 17-102 & UNE 21-186to be installed at the roof of and the centre of the building with the protection. |
95 | Supplying, Erection, Installation, Testing & commissioning of Test Link Joint Kit in a IP 55 weather proof enclosure of suitable dimension and approved make & design. |
96 | Supplying, Erection, Installation, Testing & commissioning of FRP Mast with GI Mast Note : FRP Mastat Top Minimum 1.25 Mtr with GI Mast 4 Mtr along with G.I. mast (Total 5 Mtr std mast reqd. for mounting the teMeterinal & adaptor to mount the Air TeMeterinal with Coupler/reducer, Multi strand stray wires, Joints, Clamps & Accessories. |
97 | Supplying, Erection, Installation, Testing & commissioning of Lightning Strike Recorder / counter(6 digits display) of not resistible type in an IP 67 enclosure with the minimum sensitivity of 1500A & maximum capacity of 220KA (8/20 micro second wave foMeter) tested . |
98 | Supplying, Erection, Installation, Testing & commissioning of Down conductor Recommended : 70 Sqr mm insulated copper Flaxible cable for lightning current dissipation to earth with necessary Fixing Clamp, Connector accessories etc. |
99 | Supplying, Erection, Installation, Testing & commissioning (UL Listed) copper bondesd 3 mtr long 17.2 mm dia as per RDSO spec.with terrafill(TF-50) Mouster booster compound 2 Bag. |
100 | Plumbing Electrical panel and Motor |
101 | Design, Supply, installation, testing & commissioning of Plumbing motor starter pump panel cubical type CRCA sheet steel free standing indoor type motor control centre with Aluminium bus bars, LED type indicating lamps, dust & vermin proof doors, interlock, interconnection with under noted mountings as per specifications. |
102 | INCOMER:- |
103 | 1 No. - 125Amps. TPNMCCB ( 35 KA ) |
104 | 1 Set -(0-125 A) Ammeter with selector switch & CT"s. |
105 | 1 Set -(0-500V) Voltmeter with selector switch & control fuses. |
106 | 1 Set -Phase indication lights ( R, Y, B ) |
107 | BUS BARS:- |
108 | 150,Amps. TP&N aluminium bus bars (35 KA) |
109 | OUT GOINGS:- |
110 | 2Nos.-63/32A, TP, MCCB (35 KA). |
111 | 2Nos.63A Dp MCB(10KA) |
112 | 2Nos.63A TPN MCB (10 KA) |
113 | 2 Set - (2 Nos Starter forPump) Fully Automatic DOL/stardelta STARTER up to 5/10 HP complete with Contactors with 2NO + 2NC for remote operations, Start/ Stop Push Buttons, Single Phase Preventor Relay (Current Base), ON/ OFF Indication lamps & Ammeter with CT"s of suitable ratings. |
114 | MAIN LT PANEL CUM AMF PANEL |
115 | MAIN LT PANEL CUM AMF PANEL |
116 | FROM TRANSFORMER SUPPLY INCOMERS [320 Amp-1 No. ] shall be equipped as: |
117 | 1No. 320A, 4P, Motorized MCCB with built-in microprocessor based releases for OC, S/C & E/F protection i/c socket for connection (compatibility with Microsoft) as well as 6NO + 6NC auxiliary contacts (switch). |
118 | 1No.- 24V, DC Shunt release |
119 | 1No.- 230V, AC closing coil |
120 | 1No.- 415V, AC under voltage release. |
121 | 1No.- 0-320A, Ammeter (digital type) with built-in selector switch & CT"s |
122 | 1Set- CT"s 320/5AClass-1 for metering (15 p-10 accuracy for protection and 15 va class-1 for metering) |
123 | 1No.- Voltmeter (digital type) with built-in selector switch & control fuses. |
124 | 1No.- PF meter (digital type) |
125 | 1No.- C.T.320/ 5A Class-1 for Capacitor panel. |
126 | Under Voltage relay 415VAC. |
127 | Over Voltage relay 415VAC. |
128 | O/C, S/C, and E/F relay |
129 | Voltage Phase reversal relay |
130 | Breaker control switch |
131 | 1Set- Phase indication lights R,Y,B. |
132 | 1Set- ON-OFF-TRIP Ckt. Healthy. indication lights |
133 | Spring charged indication. |
134 | 1No.- KWH meter |
135 | 1No.- Inverse Time Relay |
136 | 1No.- Local/Remote selector switch |
137 | DG INCOMER [1No.180KVA ] shall be equipped as: |
138 | 1No. 320A, 4P, Motorized MCCB with built-in microprocessor based releases for OC, S/C & E/F protection i/c socket for connection (compatibility with Microsoft) as well as 6NO + 6NC auxiliary contacts (switch). |
139 | 1No.- 24 volt DC Shunt release |
140 | 1No.- 230 volt AC closing coil |
141 | 1No. 415 volt A.C. under voltage release. |
142 | 1No.- Ammeter (digital type) with built-in selector switch & control fuses. |
143 | 1Set- CT"s 320/5A Class-1 for metering (15 p-10 accuracy for protection and 15 va class-1 for metering) |
144 | 1No.- Voltmeter (digital type) with built-in selector switch & control fuses. |
145 | 1No.- NB-2 Relay (Automatic Controller for emergency or Standby Systems) |
146 | 1No.- PF Meter (digital type) |
147 | Under Voltage relay 415V AC. |
148 | Over Voltage relay 415V AC. |
149 | O/C, S/C, and E/F relay |
150 | Voltage Phase reversal |
151 | Breaker control switch |
152 | 1Set- Phase indication lights (R,Y,B). |
153 | 1Set- ON-OFF-TRIP ckt. Healthy. indication lights |
154 | Spring charged indication. |
155 | 1No.- KWH meter |
156 | 1No.- Inverse Time Relay |
157 | 1No.- Local/Remote selector switch |
158 | Battery Charger Complete with Transformer meter/ rectifire,DC.voltmeter and ammeter, selector switch for trickle,off and Boost and current adjustment. |
159 | BUS BARS:- |
160 | 450A 4P aluminium bus bars (50 KA) as per SLD |
161 | Interlocking: FromTransformer Supply incomer and DG incomers shall be electrically interlocked so that no different source can be paralled at any point of time. |
162 | OUTGOINGS:- |
163 | 1Nos.320A TP+NL MCCB (35KA) with thermo magnetic releases for O/C, S/C & E/F |
164 | 1 Nos. 250A TP+NL MCCB (35KA) with thermo magnetic releases for O/C, S/C & E/F |
165 | 2 Nos. 125A TP+NL MCCB (35KA) with thermo magnetic releases for O/C, S/C & E/F |
166 | 1Nos.63A TP+NL MCCB (35KA) with thermo magnetic releases for O/C, S/C & E/F |
167 | 8,nos.63 A 240V, DP MCB of 25kA. |
168 | 4 nos.40 A 240V, DP MCB of 25kA. |
169 | DG Sets with Auto Mains Failure system |
170 | Supplying, installation, erection, testing and commissioning of Air cooled Diesel Engine with rated capacity of 180 KVA at 0.8 P.F., 1500 RPM. 4 stroke , multicylinder coupled to brush less type 415 volts 50 cycle/secondself exited alternatorcompleted with cushy pads, domestic silencer, exhaust pipe with in 3 M. height complete with Alternator, auxiliaries, radiator, 24 volts chargeable battery including initial charging of batteries,control panel in sound proof canopy completeas per specification. |
171 | of the following capacity DG Sets at 0.8 P.F. (lagging), air cooled diesel engine alternator set in acoustical enclosure on common base frame, day oil tank capacity should be as per standard , fuel piping, return fuel cooler, battery & battery charger, Anti Vibration mounting pads, including residential silencer Engine alternator safeties with accessories and Auto Mains Failure completeas per specification as required. |
172 | 180 KVA |
173 | Supply andfixing of under noted MS pipe as per IS:3589 Grade-330 thickness 5.0mm for DG exhaust with all accessories complete with bends, elbow, flanges etc. with 50mm thick compressed mineral wool insulation (Rock wool) as reqired .The offer shall include necessarySS Bellows, Aluminium clading,Rain hood as per standard norms with fixing accessories. |
174 | 125mm dia pipe |
175 | CCTV Monitor |
176 | Supply , Installation , Testing and Commissioning of 32" inches HD high resolution LED T.V Monitor as compatible for CCTV system etc. |
177 | FIRE FIGHTING WORK ANNEUXRE- D |
178 | FIRE FIGHTING EQUIPMENTS DSR ITEMS |
179 | FIRE PUMPs AND ELECTRICAL PANEL |
180 | Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-"F" insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. |
181 | 2280 LPM AT 56 M HEAD |
182 | Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer,instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. |
183 | 2280 LPM AT 56 M HEAD |
184 | Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-"F" insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. |
185 | 180 LPM AT 56 M HEAD |
186 | Supplying, installation, testing and commissioning of electric driventerrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) |
187 | (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body& bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 |
188 | b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-"F" insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
189 | 900 lpm at 35 m Head |
190 | INTERNAL AND EXTERNAL OF FIRE FIGHTING SYS |
191 | Providing laying, testing & commissioning of "C" class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. |
192 | 150 mm dia |
193 | Providing, laying, testing & commissioning of "C" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
194 | 25 mm dia |
195 | 50 mm dia |
196 | 65 mm dia |
197 | 80 mm dia |
198 | 100 mm dia |
199 | 150 mm dia |
200 | 200 mm dia |
201 | 250 mm dia |
202 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required. |
203 | Single headed Stainless steel |
204 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : |
205 | Single headed Stainless steel |
206 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
207 | 50 mm dia |
208 | 65 mm dia |
209 | 80 mm dia |
210 | 100 mm dia |
211 | 150 mm dia |
212 | 200 mm dia |
213 | 250 mm dia |
214 | Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : |
215 | 150 mm dia Set |
216 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required. |
217 | 65mm dia |
218 | 80mm dia |
219 | 100mm dia |
220 | 150mm dia |
221 | 200mm dia |
222 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. |
223 | 250 mm dia |
224 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required |
225 | Stainless steel (Grade-304) |
226 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required |
227 | 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 |
228 | 20 mm nominal internal dia gun metal globe valve & nozzle. |
229 | Drum and brackets for fixing the equipmets on wall. |
230 | Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
231 | 30 m |
232 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :- Gun metal |
233 | Gun Metal |
234 | Providing and fixingfire brigade inlet connection of cast iron body with ss-304 grade63mm dia instantaneous type male coupling withbuilt in check valves and 150mm dia flanged outlet complete with bolts,nuts and rubber insertionsas per IS:904. (tobe connected to static tank). : |
235 | Four Way inlet connection, 4-way 150mm dia MS pipe |
236 | Supplying and fixing air vessel made of 250 mm dia,8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
237 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories. |
238 | Pendent type |
239 | Horizontal Side wall sprinkler |
240 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
241 | Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. |
242 | 100/80 mm dia |
243 | Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes asrequired : |
244 | 150mm dia |
245 | Cable Tray |
246 | Supply and fixing of perforated M.S powder coated sheet steel cable tray of following sizes complete with bend/ tee joints, coupling plate & nuts, bolts etc. including providing and fixing GI hanger etc. as required. |
247 | 150 mm wide 50 mm depth, 1.6 mm thikness |
248 | 300 mm wide 50 mm depth and 1.6,mm thikness |
249 | End Termination |
250 | Supply and making end termination with brass single compression gland including providing and crimping of aluminium/copper solder less lugs/ferrules for XLPE/ PVC armoured/ Unarmoured aluminium/ copper conductor cable 1.1 KV grade of following sizes: |
251 | 3½ X240 sq. mm (62mm) |
252 | 3½ X50 sq. mm (35mm) |
253 | 3C x 16 sq.mm (Aluminium 25mm) |
254 | Supplying and fixing of following sizes of Steel conduit along with the accessories in surface / surface including painting in case of surface conduit in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
255 | 20 mm dia. |
256 | Supplying and drawing following sizes of PVC insulated FRLS copper conductor single core cable in the existing surface / recessed steel conduit as required. |
257 | 2 x 1.5 sq.mm . |
258 | LAYING OF L.T CABLE |
259 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. |
260 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
261 | Above 185 sq. mm and upto 400 sq. mm |
262 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
263 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : |
264 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
265 | Fire Alarm and Detection system |
266 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
267 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
268 | Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required. |
269 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
270 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
271 | Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. |
272 | 6 Zone |
273 | Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 10 Zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required - 2 Nos.(one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 set. Amplifier change over switch for inter changing amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos.12 volt, 60 AH each sealed maintenance free batteries -1 set. |
274 | MCDApproved Rate |
275 | LT CABLES |
276 | Supplying of under noted sizes ofXLPE insulated, PVC sheathed armoured cable 1.1KV grade conforming to IS-7098 of following size:- |
277 | 3½ X 240 sq. mm(Aluminium Armoured) |
278 | 3½ X 50 sq.mm (Aluminium Armoured) |
279 | 3 X 16 sq.mm (Aluminium Armoured) |
280 | Fire Extinguisher |
281 | Providing and fixing ABC (Aluminium Phosphate) Power type fire extinguisher of 6 kgs capacity complete in all respect with ISI mark i/c fixing arrangement etc as required. |
282 | Praviding and fixing 4.5 kg Co2 type fire extinguisher sqeeze grip type, trolly wheel as well mounting type complete in all respect with isi mark i/c fixing arrangement etc as required. |
283 | NON- DSR ITEMS |
284 | Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia and with necessary G.I. coupling, valve to be fitted on top of Air vessel or on wet riser as per specification. |
285 | Providing and fixing of pressure vessals tank450mm dia. x 2.0 Mhigh with dishedtop & Bottom madeofminimum6 mm thick M.S.pipe/plate complete with 25mm dia. BrassValve (Ball valve, pressure guage type), 25 mmdia, nipple,tees, elbowand allaccessories as requiredincl. fixing brackets of base plate etc. |
286 | Supply and fixing 150 mm dia CI foot valve in suction line from water tank complete. |
287 | FIRE FIGHTING PUMP PANELS& EQUIPMENTS |
288 | Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 1.6 mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as perspecification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : |
289 | Incomings |
290 | 320A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital Voltmeter 0-500V with selector switch Ammeter (0-630 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Aluminium BusBar 450Amps. |
291 | Outgoings |
292 | (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) |
293 | Main Fire Pump |
294 | 200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manualON/OFF operation. - 2 sets |
295 | Jockey Pump |
296 | 100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manualON/OFF operation. - 2 sets, |
297 | Terrace Pump |
298 | 100 Amp, 50kA TPN MCCB, Ics=100% Icu, with 20 HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with suitable volt meter , Ampear meter & selector switch along with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manualON/OFFoperation. - 1 sets |
299 | Diesel Engine Control |
300 | Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons,start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication |
301 | Providing and fixing of Sump pump for all Sump pit total Head 12 meter of sump pump voltage 240 /415,Including associated valve and non return valve, etc |
302 | Providing and fixing domestic water transfer pumps flooded suction for over head tankcentrifugal type CI casing@ 20 M head,2 LPS, voltage 415 Including associated valve and non return valve and the suction and delivery header, pressure gauge, etc. |
303 | Providing & fixingFire Brigade connection for drawout 150 mm dia of cast iron body / Gunmetal instantaneous inlet couplings complete as required. |
304 | Providing and fixing M.S. fire hose shaft door with frame fabricated from angle iron frame 40 x 40 x 5 mm thick, angle iron, shutter 16 g M.S. sheet of fully welded construction with hinged double front door with locking arrangement and butt hinges, 15 x 3 mm lugs 10 cm long (6 Nos) embedded in cement conc. blocks ( 1: 3: 6 mix) or with rawl plug and screws/bolts and nuts as required, partly glass door 4 mm thick , painted with one coat of primer, stove enamelled fire red finished, "Fire Hose" written on front, suitable to accommodate 1 Nos single headed Hydrant landing valve, 1 fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe, 1 fire-man"s axe as required. (Approx.size 0.9m x 2.1m) |
305 | Providing and fixing Weather proof hose cabinets fabricatedfrom 16 g M.S. Sheet with full glassdoorandlocking arrangement, suitable to accommodate2 Nos. single headed Hydrant landing valve, 2 nos. 15 Mlonghoseand1 No branch pipe/ fire brigade connectors, 2 Nos. fire extinguishers. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raisedmasonry platform as required.(Approx 0.75m x 0.6 m x 0.3 m). |
306 | Supply Installation and testing forged brass Ball valve with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads suitable for 15 kg/sq cm. complete in all respects. |
307 | 20 mm dia nominal bore |
308 | 25 mm dia nominal bore |
309 | Providing and fixing dial type pressure gauge at hydrant station, complete in all respects. Dial dia 100 mm, calibration 0-15 kg/sq cm. Valve shall be paid separately. |
310 | 20 mm dia nominal bore |
311 | Providing and fixing 25 mm diainspecting &testing assemblywith gunmetal valve, gunmetal sight glass,bypassvalve & connectedto drain line. |
312 | Providing and fixing for domestic water tank and fire water tank of puddle flange in G.I Material, with Hot Dip Galvanized puddle flange, 600 mm lenght ,C Class Pipe puddle plate 6 mm of thickness (150 + dia of pipe + 150 ) one end threaded. and as per the stite requirement , |
313 | 250 mm |
314 | 150 mm |
315 | 100 mm |
316 | 80 mm |
317 | 50 mm |
318 | Providing and fixing of suitable flexible neoprene rubber expansion joint, singlearch with integral rubber flanges tested at 1.6 Kg/cm2 with SRR drilled as per BS-10, Table-D, complete. |
319 | 150mm dia |
320 | 80 mm dia |
321 | 65mm dia |
322 | Supply and fixing of on-line UPS of rating 5.5 KVA (Single Phase i/c & single phase o/g) with 30 mins power back-up, 1 Nos ups DB double doorwith 40 amp D.P MCB,incomerand 6 , Nos 16 Amp S.PMCB for out going supply along with all accessories and as perrequirement.( for Staircase emergency light) |
323 | Fire Rated DOOR |
324 | Providing and fixing of50mm thick and 120 minutes firerating, conforming to BS:476 part 22 IS: 3614 part-II,specifications similar to thatof prototype tested & certified at CBRI Roorkee, suitable for mounting on door frame made out of hardwood redmarrandiof section 120x70mm. The Shuttershall be comprising of 2 non- metallic, asbestos free, fire/smoke check doorsCalcium Silicateboardseach 12mm thick sandwiching 20mm thick fire resistant insulationfiller facedwith 3mm thick commercial ply onbothfaceswithhard wood lipping all aroundthe shutter with heat activatedIntumescentfire seal stripofsize 20 mm x 4mmon allsidesexceptbottom shutter and the Frame is fitted with 2no. Intumuscent fire seals strip of size 10x4mmin Main Frame (for smoke sealing). The shutter will be fixed with the frame with the help of SS ball bearing hinges of size 100x75x3mm.Provisions/reinforcement for fixing all fixtures shall be built in on the doors prior to the supply |
325 | The board shall be Resistant to vermin, mould growth, minor impact, abrasion and short termwater attack and shall be Off –white in colour with asmooth surface suitable to receive most forms of decoration.The Construction design shall be similar to the design tested as per BS 476 part 22 and IS 3614 Part II, atCBRI, India. The rate also include SS Ball Bearing Hinges of size 100mm x 75mm x 3 mm of Becker Fire Solutionsthe shutter is provided with appropriate openings for view panel glass, if required. Prototype Test certificate forfire rating of doors from CBRI, Roorkee for earlier tested design shall be attached along with manufacturers test certificate.Intumescent hinge Liner & intumescent lock jackets of Lorient Make should be provided. Provisions/reinforcement for fixing all fixtures shall be built in on the doors prior to the supply. All wood work will be primed with FR-880 primer and putty |
326 | Frame Hardwood Red Marrandiwith fire reted primer & fire reted paint finish . |
327 | Shutter with primer finish |
328 | 1mm thick Laminate finish |
329 | OPTIONALHARDWARE |
330 | vision Panel - Supplyof6mm thick Clear, 120 minute Rated Non Wired, Toughened Glass tested in accordance to EN 1363 / EN 1364 and Compliant to BS 476 Part 22. The Glass should be compliant to Class A Category of Impact Resistance to BS 6206:1981 Safety Glazing Material. The Glass should have a Light Transmission ration of approx 87% according to EN 410 standards. Supply should be complete with Matrix Mineral Boards and VIPER Intumescent Putty SP - 711 complete in all respects OF SIZE 300X300MM |
331 | HINGES - ProvidingofSS Ball Bearing Hinges of 100 x 75 x 3mm complete with SS Screws (4Nos per panel) |
332 | DOORCLOSER- Providingfixing of UL Listed fire ratedHeavy Duty door closers warranty offeredby manufacturer (Beker/Doorma/AssaAbloy/Gaze/Door Set) |
333 | Panic Bar- Providingof U L Listed fire rated Panic Bar of SBL 990 series single / doubleleaf panic exit devicesoffered by manufacturer |
334 | Single Leaf Panic Bar Set |
335 | Double Leaf Panic Bar Set |
336 | PANIC TRIM- Providing of Openable locks / trims for Panic Barsto operate panic bar from outside with necessary screws as required.The lock and handle should be an amalgamanted single motion piece from the same manufacturer as that of Panic Bar |
337 | Mortise Dead Lock- ProvidingofMortiseIR make Schlage EL 2010with80mm cilenderwith both side key ofwarranty offered by manufacturer with One side key & one side no.Bar |
338 | Fashner- Providing offashner M10X150mm Lengthwith hole plug |
339 | PARKING EQUIPMENT ANNEUXRE- E |
340 | Supply,installation,erection,testing,andcommissioningofPuzzleparkingsystem designed to accommodatecars of size 4800x1900x2000mmwith average retrieval/ parking time of 90 secs. All the structural work shall be finished and painted as per suitability and requirement. The Scope shall be complete with the following componentsincluding design of all other allied componentsrequired for the proper functioning of Puzzle system as per Specifications and Makes as specified in RFP anddirection of Engineer-in-Charge: A Accesscontrolsystem,Ticketingcardreader(OneatEachModule),software,200 nos card, server etc complete and Digital board for Capcity/vaccancy Indication. B Suitable structure frame work, motorized pallet up-down and transverse movement with2500kgcapacitycompletewithallcomponents,wireropes,chains,locking devices, safety devices, platforms etc. C Electrical,controlSystem,sensorsystem,all requiredpanels, earthings,Powerand Data cables including 1 seperate PLC for each module (+ 1 spare PLC totally in case of failurerelatedreplacementinanyPLCinstalledwitheitherofthemodules)with Complete PLC wiring, Wiring from main panel and sensors, complete with PLC+electrical installation, Mechanical equipment, contactors, Sensor- Control systemnecessaryelectricfittings.etccomplete.IncludingSystemintegrationor smooth automatic operation of parking system (in-caseofPLCfailure,requiredreplacementofPLCsholdbedonewithin45 minutes) D Entry & exit units with Automatic barriers at the main entry & exit with interlinking & programming with the Puzzle parking system for hasle free custemer interface. E Installation, System Integration, testing, trial run and commissioning of entire parking system. |
341 | Note : 1. The scope of work in the above items includes all Steel structure frame work, Design of electrical/mechanical components as required for satifactory functioning of theparkingsystemasperperformanceparametersandchecks.Themodulewise seperation of the whole parking system shall be detailed in drawings and may be referred accordingly. The specifications & makes shall be detailed in RFP II. 2. All civil works of foundation/ facade etc shall be additionally detailed, However the Bidder must consider the superstructure arrangement of the parking structure within its quoted rates. 3. Structure must be inclusive of additional load for "structure of1 no. fire escape staircase" per module. ; structural load of 3.nos. Walkway along Long face (Front) of each Module; Overhead Watertank of 30,000 Ltrs as per marked location in the drawing. 4. Emergency Replacable inventory of Components/ Equipment of min. adequate nos. of Chain, Wire Rope, Motors (both lifting and traversing motors), critical sensors, PLC etc should be kept at site to be replaced in case of breakdown and inclusive of rates. |
342 | Puzzle Parking module as per detail of item: Module Type:6X6 Module (All Mechanized) Height: G+5 Available Slots for parking at G level (ECS): 5 Available Slots for parking at Mid levels (ECS): 5x4 = 20 Available Slots for parkingat Top level (ECS): 6 Total Available Parking spaces: 31 |
343 | Puzzle Parking module as per detail of item: Module Type:5X6 Module (All Mechanized) Height: G+5 Available Slots for parking at G level (ECS): 4 Available Slots for parking at Mid levels (ECS): 4x4 = 16 Available Slots for parkingat Top level (ECS): 5 Total Available Parking spaces: 25 |
344 | Puzzle Parking module as per detail of item: Module Type:5X6 Module (All Mechanized) Height: G+5 Available Slots for parking at G level (ECS): 3 Available Slots for parking at Mid levels (ECS): 3x4 = 16 Available Slots for parkingat Top level (ECS): 4 Total Available Parking spaces: 19 |
345 | OPERATION & MAINTENANCE WORK ANNEUXRE-F |
346 | Cost of Operation and Complimentary maintaianance (Year 1) |
347 | Cost of Operation and maintaianance Year 2-10 (including all spares, consumables, manpower, insurance, energy etc as detailed in RFP volume 1& 2) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail