}

Repairing Of Overhead Water Reservoir Including Painting Of Pig Sheds At Haringhata Farm, Nadia, Pin-741246 During The Year 2021-2022, Pig Sheds at Haringhata Farm, Nadia PIN-741246-West Bengal

Animal Resources Development Department has published Repairing Of Overhead Water Reservoir Including Painting Of Pig Sheds At Haringhata Farm, Nadia, Pin-741246 During The Year 2021-2022. Submission Date for this Tender is 08-01-2022. Reservoir Tenders in Pig Sheds at Haringhata Farm, Nadia PIN-741246 West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

30423449
Repairing Of Overhead Water Reservoir Including Painting Of Pig Sheds At Haringhata Farm, Nadia, Pin-741246 During The Year 2021-2022
Open Tender
Indian
West Bengal
Pig Sheds at Haringhata Farm, Nadia PIN-741246
08-01-2022

Tender Details

Repairing Of Overhead Water Reservoir Including Painting Of Pig Sheds At Haringhata Farm, Nadia, Pin-741246 During The Year 2021-2022

Key Value

Document Fees
Refer document
EMD
INR 69846.0 /-
Tender Value
INR 34.92 Lakhs /-

BOQ Items

Name of Work : Repairing of overhead water reservoir including painting of pig shedsat Haringhata Farm, Nadia, PIN-741246 during the year 2021-22
Sl. No. Item Description
1CIVIL WORK
2Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm.
3Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specificirection of the Engineer-in-charge)
4Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer"s specification] [Mode of measurement:The affected surface area of inforcement shall be considered for payment]
5Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety
6Hire and labour charges for shuttering for concrete work in overhead R.C. Reservoir on separate R.C. frame including fitting, fixing and striking off after compeltion of work including staging upto 4 m using plyboard or steel shuttering.
7Reinforcement for reinforced concrete work inall sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (ifecessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor / upto 4m (i) Tor steel/Mild Steel: SAIL/TATA/RINL
8Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.
9Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagingwhere necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar(a) 15 mm thick plaster
10Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth.
11Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc .
12Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer"s specification for water proofing layer in water tank etc. (No Departmental Cement is quired)
13Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) ormooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC.(b) Two Coats
14Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer"s specification and as per direction of Engineer-in-Charge to be appliedver acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer . Normal Acrylic Emulsion
15Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc
16Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface
17With other than hi-gloss of approved quality-(iv) two coats (with any shade except white)
18Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket,educing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessaryittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
19(i) 100 mm dia. medium quality
20(i) 150 mm dia. medium quality
21Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).
22(i) 100 mm dia
23(i) 150 mm dia
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail