Animal Husbandry And Veterinary Department-AHAVD has published Construction Of Office Building At Jd Office, Silchar Construction Of Office Building At Joint Director, A.H And Vety. Deptt. Office Campus, Cachar, Silchar In Cachar District. Submission Date for this Tender is 11-01-2022. Building Work Tenders in Silchar Assam. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 10-Jan-2022 | Financial Bid | Financial Bid | 11-01-2022 |
Sl. No. | Item Description |
1 | Earth work in excavation for foundation trenches of walls, retaining walls, footimgs of column, steps, septic tank etc. including refilling (return filling) the qnty as necessary after completion of work, breaking clodsin -------------as directed and specified. |
2 | Providing soling in foundation and under floor with stone/best quality picked jham bricks, sand packed and laid to level and in panel after preparing the subgrade as directed including all kabour and material sand if necessary dewatering complete. |
3 | Plain cement concrete works with coarse agg. Of size 13mm to 32mm in foundation bed for footings, steps,walls,brick works etc. as directed and specified including dewatering if necessary and curing complete. |
4 | Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone agg. Including dewatering if necessary and curing complete. |
5 | Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank etc. |
6 | ii.In Super structure propl:2:4 |
7 | Providing and laying 25mm thick damp proof course with c.c in prop. 1:2:4 with graded stone agg. Of 10mm down niminal size including providing approved damp proof admixture in prop. As recomonded by the manufacture including curing etc. |
8 | Supplying fittingn and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying anf binding with 20G annealed black wire and placing in position with proper blocks supports, chairs, spacers etc. complete. |
9 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceilling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:3.1.1.1 - Foundation , footing, bases of fit, |
10 | 3.1.1.3- wlumn, pillay , post |
11 | 3.1.1.5:- Flat surfaaces such s siffits of suspended floors, roofs, landings, cantilever slab, chajjas,belconies and the like. |
12 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level. |
13 | 15mm thick cement plaster in single coat on single or half brick wall for interior plastering upto 1st floor level including arises, internal rounded angles , not exceeding 80mm girth and finished even and smooth including curing complrtr as directed. |
14 | 65mm thick cement concrete floor consisting of 53mm under layer of cement concrete in prop. 1:3:6(1 cement: 3coarse sand : 6 coarse agg. Of 25mm and down) and12mm thick wearing coarse of cement sand plastering in prop. 1:2 laid in panels and finished with a floating coat of neat cement finish including curing complete. |
15 | Earth /Sand filling in plinth in layer not more than 150mm thick including necessary carriage as directed…….(c) With river sand or silt (Pedominantly non plastic) by truck carriage including loading and unloading |
16 | Providing fitting & fixing powder coated pressed steel door frame 1.25mm/1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel based ties at the bottom of the frame -----------at all level. |
17 | Providing fitting and fixing 40mmx48mm wood reinforced PVC chowkats fixed to the columns/stiffeners/walls with necessary holdfast/sleeves etc as specified and directed at all levels. |
18 | Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/BHAGWATI SAI ,(WITH PRROF OF PURCHASE OF INGOT FROM PRIMARY PRODUCER)/Other equivalent primary producer) without horizontal glazing bars joints mitred and welded(Manufactured to relevant IS specifications) fitted with 6mmx3.15mm lugs 100mm long embeded incc blocks 150mmx100mmx100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed at all level. |
19 | Providing fitting and fixing Antiskid tiles of approved quality, size, shape etc----as directed. |
20 | Providing polished Ceramic wall tiles ofof approved quality of specified size, shape and thickness not less than 8mm on walls and skirting overcement mortar in prop 1:3 including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedilite/Rouf)/ white cementslurry mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. |
21 | Providing fitting, hoisting and fixing of roof trussesfabricated using any one or combination of following sections of (i) Square section (ii) Rectangular Hollow sections of specification SHS/RHS and including purlins, bottom runners and M.S. cleats, M.S. angles base plank,bolts and nuts with primer including fitting bottom runner and cleats etcfor fixing ceiling joists as per designe and drawing as directed. |
22 | (a) Using TATA make RHS/SHS of grade 310 conforming to relevant I.S. code 4923:1997. |
23 | Providing pre painted Galvanized Iron Roofing (PPGL) at all levels inccluding fitting and fixing with sek=lf drilling, self tapping screws complete.(Roof trusses, purlins, etc. to be measured and paid separetly) Dynaroof/Wonder roof/JSW steel/Spectrum) as directed by the deptt. |
24 | Providing pre painted Galvanized Iron Roofing (PPGL) at all levels inccluding fitting and fixing with sek=lf drilling, self tapping screws complete.(Roof trusses, purlins, etc. to be measured and paid separetly) Dynaroof/Wonder roof/JSW steel/Spectrum) as directed by the deptt. |
25 | Providing and fixing in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mmx600mm/1200mmx600mm with main runner 38x24mm, cross tee 29mmx24mm & wall angle 24mmx24mm--------complete as directed. |
26 | Cement plaster skirting with cement mortar (1 cement : 3 coarse sand) finishedwith a floating coat of neat cement finish includingroundingof junction with floor. |
27 | Providing fittingand fixing in positioncollapsible M.S. shutter of approved make made of 80mm wide laths interlocking together through their entire length and jointed together at the ends by end-lock mounted on specially designed pipe and shaft with brackets plates, guide-----------cover for the shutters. |
28 | roviding cement concrete appron in prop. 1:4:8 with coarse agg. 20mm nominal size including finishing the surfaces with 10mm thick cement plaster in prop. 1:3 with a floating coat of neat cement finish. |
29 | (i) Cutting and clearing bushes consisting plants and all sorts of bamboos including----as directed. |
30 | (c)Applying one coat of distemperprimer of approved brand and manufacture on wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
31 | Applying priming coat over new stell and other metal surfaces up to 100mm in grith/width after and including preparing the surface by throughly cleaning oil, frease, dirt and other foreign matter. |
32 | Painting two coats (excluding priming coat) of paint on new steel and other metal surfaces. |
33 | Applying priming coat over new wood and wood based surfaces up to 100mm in grith/width after and including preparing the surface by throughly cleaning oil, frease, dirt and other foreign matter. |
34 | Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asianpaint/Bergerpaint/ICI paint/J & N paint/Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. |
35 | Providing fitting and fixing Vitreous china squatting plate urinal basin of with automatic flush cistern with standard flush piupe and CP brass spreader---------wherever required. |
36 | Supplying fitting and fixing 87.5 degreePVC pipes bendof(Supreme/Prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels. |
37 | Providing precast R.C.C. slab over drain, septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering, curing etc. complete including fixing in position as directed. |
38 | Supplying fitting and fixing concealed cistern with all internal fittings with CS brackets including fitting nand fixing standard size CF flush pipe, union, clamp etc. |
39 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up the trench with brick bats/charcoal covered---------------as mentioned in the table |
40 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. SIDES AND SOFFIES |
41 | Thick polymar rein forced pvc dv shutters few to the chowkets |
42 | providing fiting & sixing flush dor shutters solidfor construction with frame if 1st class have wood @ decorative type fare panel and black band |
43 | providing fitting and fixing anouzed aluminium sliding window and ventalation of standard section having thickness at least 1.90mm of apporved |
44 | Brick work In cement mortar with 1st class bricks including racking out joints and curing complete prop 1:4 |
45 | Labour for test boring with 40mm (internal) dia G.I.Pipes including keeping surplus of earth end every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small in container (container scaffolding, tools etc. will have to be arranged by the contractor at his own cost). |
46 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. |
47 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. |
48 | Supplying including installation of submersible taype water supply motor pumset with all accessories etc all complete as directed. |
49 | 1 H.P. Single Phase |
50 | Supplyingfitting and fixing check valve (non return valve) including thread to pipes. |
51 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (1000 LITRE CAPACITY) |
52 | Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. |
53 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed |
54 | D) PP-R pipe with PP-R fittings (UsingSFMC/ FUSION brand pipe) © 40mm ( TATA) |
55 | (d) 25 mm (TATA medium) |
56 | (a) 50mm(TATA medium) |
57 | (e) 20mm (TATA medium) |
58 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) |
59 | (a) Bib cock short body |
60 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) /Jaquar/Continental / Clarion (a) 15mm dia |
61 | (a) 25mm dia |
62 | Wiring for 5/6 oin Amps power plug point with 4 sq.mm PVc insulated single core unseathed industrial cable HFFR/ZHFR snforming to IS-694 1990 with flexible bright annealed electronic cooper conductor for voltage garde up to 1100 volts in surface flat 19 mm ISI marked casing "n" capping including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 160Amps flush type switch with phenolic laminated sheet cover |
63 | Wiring circuit wiring with 2× 1.5 sq. mm P.V.C. insulated single core unsheathed industrial cable HFFR/ZHFR conforming to IS-694, 1990 with flexible bright annealed electronic cooper conductor for voltage grade up to 1100 volts in surface flt 19 mm Isi marked casing "n" capping system, including connection as required. |
64 | Wiring for drawing sub-main line with P.V.C insulated single core unsheathed industrial cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic cooper conductor for voltage grade up to 1100 volts in surface flat ISI marked casing "n" capping including earth continuity. |
65 | Supplying with……….testing and Commissioning of Hi-wall 4 star ratingnon ductd Split typeaim conditions of two following capacity with cordless remate complete with indoor and outdoor unite coppe pipe and electrical connection as approved by the deptt. |
66 | Supplying including sitting and fixing of following A.C. wall fan of following sweeps with malling necessary connection as approved by the deptt. |
67 | Wiring for call bell pointh with 3×1.5 sq.mm. P.V.C insulated single core unshead |
68 | Wiring for light/ fan/ call bell point with 2*1.5 aq.mm P.V.C insulated sibgle core unsheathed industrial ( Multistrand ) cable HFFR/ ZHFR conforming to 15-694. 1990 wth flexible bright annelated electroytic copper conductor voltage grade up to 1100 voltsin surface Bat 19 run ISI marked casing N capping (AKG) Precision presto / plast/ polycab/ MW or equivalentmake as approved by the Deptt. |
69 | short point upto 3.00m Lenght |
70 | Medium Point upto 5.00 n L |
71 | Long Pt upto 10.00 m L |
72 | 4 way SPN SINGLE door supplying including fitting and fixing steel, phosphaitised, powder painted single door surface mountaing MCB DB incorporate with bas bar neural link, earth bar and din rail etc. fited on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. |
73 | 4 way SPN SINGLE door |
74 | supplying including fitting and fixing of the following CFL NI lamps. |
75 | Master PL-L 55/w36/w 4p |
76 | Supplying including fitting and fixing of the following A.C ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary coonnecion a approved by the deptt. As required completea and as direced by the departmnt |
77 | standard model 1400 sweep |
78 | supplying and drawing of whethe proof aluminium conductor cable of the following size as directed and specified by the deparment |
79 | 6.00 sq.mm twin core |
80 | 5-10 Amp. ISI aproved single metre ( single ) market price |
81 | ASEB Load Lad Security/ Service connection etc. |
82 | Fan Hook |
83 | supplying installation and drawing of whether proof aluminium conductor cable of the following size as directed and specified by the department. |
84 | applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surface even and sand paperd smooth. |
85 | finishing wallwith water proofing cement paint of appproved brand and manufactre and of required sade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powderd materials |
86 | supplying fitting and fixing M.S. angels, M.S. flat , M.S. Bolts and nuts including painting with red lead paint one coat complete as directed. |
87 | steel work welded in built up sections, framed work suppling cutting , hoisting and fixing in positions and priming coat of red-lead paint including drilling sales, supplying fitting and fixing with bolts and nuts or if necessary as direced |
88 | in beams and joists with connecting plates/angled cleat. And thick |
89 | Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections having thickness alteast 1.90mm of approved brand(HINDALCO/NALCO/BALCO/JINDAL/BHAGWATI SAI ,(WITH PRROF OF PURCHASE OF INGOT FROM PRIMARY PRODUCER)/Other equivalent primary producer) without horizontal glazing bars joints mitred and welded ( Manufactured to relevant is specificatiions) fitted with 6mmx3.15mm lugs 100mm long embeded incc blocks 150mmx100mmx100mm in 1:3:6 mis including providing and fixing handles, angle clear, rubber gasket, roller, bolting device, locking arrangment, screws etc as required complete as specified and directed at all level. |
90 | provomg barge board of size 200x20mm with 1st class local Hollock / Bonsum tmber including fitting and fixing with necessary wood screws ets. Complete. |
91 | proving fitting and fixing anodised aluminium framed sliding glazed doors with partition walls with anodised aluminium frames made of 100mmx43mmx2mm section of approved brand as directef by the department at all levels. |
92 | proving fitting and fixing M.S. grill of required pattern for window /clerestory windows/opening with M.S. flat at required spacing in frame allround, squre or round M.S> bars with round headed bolts and nuts or screws. |
93 | proving drain with brick work in cement mortar in prop, 1:5 with half brick thick side walls and 100mm thick cc base over one brick flat soling including 15mm thick cement plastering in prop, 1:3 finished with a floating coat of cement slurry as directed. |
94 | distemper with dry distemper of approved brand and manufacture (two coats) and or required shade on new wall surface to give an shade, over and including a primary coat of white washing after throughly brushing the surface free from mortar droppings and other foreign amtter and including preparing the surface even and sand papered smooth. |
95 | Proving fitteing and fixing Vitreous china aquatting platee urinal basin of with automatic flush cisterr with standard flush piupe and CP brass spreader…. Whrerver required. |
96 | Providing fitting and fixing Vitreous china wash basin with CI/MS brackets, C.P. brass chain with plug, PVC waste pipe including painting of fittings and brackets , cutting and making good the walls whrever required. |
97 | Proving fitting and fixing Decorative Mirror complete as directed |
98 | Proving fitting and fixing C.P. towell rail complete as directed. |
99 | supplying fitting and fixing PVC pipes of 6Kg/cm2 (Supreme /Prince) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels. |
100 | supplying fittingand fixing pvc plain sinle tee of supreme made ISI Approved including joining Fitting110 mm dia |
101 | Gun metal country pit valve of approved brand as specified and directed.(full way value).110 mm dia |
102 | supplying fitting and fixing PVC coupler of (Supreme/Prince ) or other ISI approved including joining, fitting and fixing with clamps etc as necessary compltet at all levels. |
103 | (b) Concealed by chiselling or beaking brick wall/C.C>/R.C.C> amd making good to the damage |
104 | supplying fiting and fixing 75mm dia PVC cowel of ISI approved including joining, fitting and fixing with clamps etc, as necessary complete at all levels. |
105 | roving fitting and fixing C.I Grating to the floots complete as diredted and specified |
106 | Proving fitting and fixing and fixing 450mm dia, 90mm thick C.I. man hole cover and frame of 38kg weight complete as diredted. |
107 | providing fitting and fixing CP soap traay /soap dish complete as directed. |
108 | Proving fitting and fixing vitreous water closet squating pan (India type W.C. Orissa pattern ) with al fittings and fixture complete. |
109 | supplying fitting and fixing M.S. Sign board including INSTALLATION letter writiing as directed by the deptt. |
110 | supplying fitting fixing of G.I. TEE of size 80mm / 40mm/80mm size and weight not less than 4kg( market rate) |
111 | Development of the tube well with compressor or by over pumping unit 48 hours |
112 | supplying of 4.0 sqmm3 core submirsible cable for submirsible pump set |
113 | supplying fitting fixing of Weather proof wirewith necessary connection |
114 | providing supporting clamp |
115 | providing M.S. well cape of size 250mm dia |
116 | providing IRON sheet door including framing , painting complete as directed |
117 | applying 1 coat of cement primer of Approved brand and manufacture on new wall thoughly brooming the surface etc.. |
118 | finishing wall with water proofing cement , paint of approved brand and manufacture and of required shade on new wall surface etc. |
119 | SUPPLY FITTING AND FIXING 87.5 DEGREE PVC PIPE ISI APPROVE INCLUDING JOINING FITING AND FIXING ETC110MM DIA |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail