}

Construction Of Gi Shed, Pathway And Boundary Wall At Veer Udyan Ward No 71 ( Mla Fund ) Construction Of Gi Shed, Pathway And Boundary Wall At Veer Udyan Ward No 71 ( Mla Fund ) , ADA Ajmer-Rajasthan

Ajmer Development Authority has published Construction Of Gi Shed, Pathway And Boundary Wall At Veer Udyan Ward No 71 ( Mla Fund ) Construction Of Gi Shed, Pathway And Boundary Wall At Veer Udyan Ward No 71 ( Mla Fund ) . Submission Date for this Tender is 09-12-2021. Shed Construction Tenders in ADA Ajmer Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

30206512
Construction Of Gi Shed, Pathway And Boundary Wall At Veer Udyan Ward No 71 ( Mla Fund ) Construction Of Gi Shed, Pathway And Boundary Wall At Veer Udyan Ward No 71 ( Mla Fund )
Open Tender
Indian
Rajasthan
ADA Ajmer
09-12-2021

Tender Details

Construction Of Gi Shed, Pathway And Boundary Wall At Veer Udyan Ward No 71 ( Mla Fund ) Construction Of Gi Shed, Pathway And Boundary Wall At Veer Udyan Ward No 71 ( Mla Fund )

Key Value

Document Fees
INR 500 /-
EMD
Refer document
Tender Value
INR 10 Lakhs /-

BOQ Items

Name of Work:Construction of Boundry wall plaster , Pathway Extention and GI sheet shed in veer udyan at ward no. 71 Ajmer
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic Excavator )/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils Foot path
2Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering- All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Foot path
3Random Rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in :Cement Mortar 1:6 ( 1-Cement : 6-Sand). Boundry wall
4Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.
5Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish :20 mm thick Foot path
6Applying one coat of Cement primer of approved brand and manufacture on wall surface including all scaffolding: Boundary wall
7Painting exterior surface ofWallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect including scaffolding and safety provision New Work Boundary wall
8Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). Footpath
9Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : new work Gate
10Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Shed
11Supply & installation of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-incharge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge.The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Shed
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail