Paschimanchal Vidyut Vitran Nigam Limited has published Shifting Of 33 Kv And Overhead And Underground Lines At Ganga X Press Way On Row In The Area Of Edd Iv Meerut. Submission Date for this Tender is 10-12-2021. Transmission Line Tenders in Meerut Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Dec-2021 | TENDER NO. 98/2021-22 | Other | 10-12-2021 |
| Sl. No. | Item Description |
| 1 | PART-A (SHIFTING OF 33 KV LINE) |
| 2 | Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :- |
| 3 | ST Pole 13 Mtr. Long. |
| 4 | Line material such as MS Channel 125x65x3200 forTop 5 Nos. + 100x500x2600 Dropper25 Nos.) 33 KV V Type Cross arms (09 no.), 33 KV pin insulator (100 No.), 33 KV Disc insulator (90 No.) Disc fitting (90 No.), T-Off channel 100x50x13 (09 No.), MS Flat iron (90 kg), Flat chennel iron (250 Kg.), Guarding cross arm (156 No.), Stay set Complete (100 No.), ACSR dog conductor (2200 mtr.), GI Wire 6/ 8 SWG(80+900 Kg.), MS angle iron (04 no.), Armour Rod (12 Set), 33 KV Cable Jointing Kit (08 No.)CableJointing Kit StraightThrough 04 No), Disc insulator for stay (100 No.), MS angle pole support stay (20 No.), Earthing rod complete(19 No.), Aluminim binding wire 6-SWG(80 kg.), GI wire 6-SWG(790 kg), Barbed wire (800 kg), Pipe joint coupler (74 No.) |
| 5 | 33 KV XLPE Cable 3x300 sq.mm |
| 6 | Cartage of following material from JE, Store to site of work on day to day basis as per requirement of site ( including loading & unloading at both ends maximum distance up to 10-15 Km.) :- |
| 7 | ST Pole 13 Mtr. Long. |
| 8 | Line material such as MS Channel 125x65x3200 forTop 5 Nos. + 100x500x2600 Dropper25 Nos.) 33 KV V Type Cross arms (09 no.), 33 KV pin insulator (100 No.), 33 KV Disc insulator (90 No.) Disc fitting (90 No.), T-Off channel 100x50x13 (09 No.), MS Flat iron (90 kg), Flat chennel iron (250 Kg.), Guarding cross arm (156 No.), Stay set Complete (100 No.), ACSR dog conductor (2200 mtr.), GI Wire 6/ 8 SWG(80+900 Kg.), MS angle iron (04 no.), Armour Rod (12 Set), 33 KV Cable Jointing Kit (08 No.)CableJointing Kit StraightThrough 04 No), Disc insulator for stay (100 No.), MS angle pole support stay (20 No.), Earthing rod complete(19 No.), Aluminim binding wire 6-SWG(80 kg.), GI wire 6-SWG(790 kg), Barbed wire (800 kg), Pipe joint coupler (74 No.) |
| 9 | 33 KV XLPE Cable 3x300 sq.mm |
| 10 | Erection of Four Pole 13 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil by providing of stone pad including back filling of the pole with proper ramming after completion of work. |
| 11 | Fabrication and fixing of Four pole suitable for 33 KV line accessories Complete. |
| 12 | Erection of Double Pole 13 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil by providing of stone pad including Fabrication and fixing of double pole suitable for 33 KV line accessories Complete. |
| 13 | Erection of Single Pole 13 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil by providing of stone pad including back filling of the pole with proper ramming after completion of work. |
| 14 | Fabrication and fixing of Single pole suitable for 33 KV line accessories Complete. |
| 15 | Grouting of ST Pole 13 mtr. Long as per respo norms |
| 16 | Laying lifting stringing of proper sagging of ACSR Dog conductor for 3 phase, 3 wire 33 KV line including binding & jumpering properly. |
| 17 | Stay Set complete for 33 KV line |
| 18 | Grouting of stay rod with BB concreating in ratio 1:4:8 in block of size 0.30x0.30x0.6 mtr as per RESPO. |
| 19 | Fixing of MS angle pole support stay |
| 20 | Fabrication and fixing of Gaurding angle of 33 KV Line size MS angle 65x65x6 mm. (1.6 mtr. long)/Other angles |
| 21 | Guarding of line with G.I. wire having 2 no. horizontal wire & 3 Mtr distance of laces of 6 SWG/8 SWG G.I. wire complete work in all respect. |
| 22 | Providing & fixing of HDPE pipe 6"" dia. for laying of underground 33 KV XLPE 3x300 sq.mm.. cable complete work in all respect |
| 23 | Laying of 33 KV XLPE 3x300 Sq.mm. cable across in HDPE pipe 6"" dia. complete work in all respect |
| 24 | Providing & fixing of G.I. pipe 6"" dia.( supporting for cable for DP 24 Mtr. each) |
| 25 | Making a section pole to exist pole after fabrication & fixing of T channel with fixing of all 33 KV accessories. |
| 26 | Earthing of each 33 KV line Pole after drive of electrodes of size 20mm x 250 mm and connection the earthing point with GI wire. |
| 27 | Dissmentling of ST pole/R.S. Joist by digging the pits & removal of complete 33 KV line accessories. |
| 28 | Removal of ACSR Dog Conductor after opening the binding and making coil properly |
| 29 | Sundry item :- Cutting & chopping tree branches near side of line for making the clearance between line and tree. |
| 30 | Laying of 33 KV XLPE cable & making loop |
| 31 | Fixing the cable jointing kit with the end of XLPE cable including mounting the same on pole with proper binding. |
| 32 | Fixing of straight through cable jointing kit. |
| 33 | Providing and fixing of stay clamps. |
| 34 | Providing and fixing of Earth wire clamp. |
| 35 | Providing and fixing of Eye bolt 12x100 sq.mm. |
| 36 | Providing and fixing of Holding clamp suitable for T-off channel |
| 37 | Providing and fixing of Cross arm Holding clamp. |
| 38 | Providing and fixing F-Bracket for 33 KV |
| 39 | Providing and fixing E-Bracket for 33 KV |
| 40 | Providing and fixing of Holding clamps. |
| 41 | Providing and fixing of Bolt and Nuts. |
| 42 | Providing and fixing of PG Clamp for dog conductor |
| 43 | Providing and fixing of Number Plate with clamp |
| 44 | Providing and fixing of Danger Plate with clamp |
| 45 | Providing and fixing of Barbed wire |
| 46 | Providing & painting of Red oxide |
| 47 | Providing & painting of aluminium paint |
| 48 | Providing & fixing of pipe jointing coupler |
| 49 | Providing & fixing of HT tape |
| 50 | Providing & fixing of Empire tape |
| 51 | Providing & fixing of Aluminum tape |
| 52 | Providing & fixing of Aluminum Jointing Sleeves |
| 53 | Providing & fixing of HOT deep galvanized cable support clamp for 300 sq.mm. 3 core cable |
| 54 | Back cartage from site of work to JE store/Dump Site including loading & unloading at both ends:- |
| 55 | A) ST Pole/R.S Joist from work site central to store meerut |
| 56 | B) Line material such as ACSR dog conductor (15000 mtr.), 33 KV V type cross arm (45 no.), MS Channel Top/Droper/Brasing LS scrap (234 Kg), 33 KV Pin insulator with pin (290 no.), Disc insulator (100 No.), Disc fitting (84 No.) |
| 57 | Back cartage from JE store/Dump Site to Central Store Meerut including loading & unloading at both ends:- |
| 58 | A) ST Pole/R.S Joist from work site central to store meerut |
| 59 | B) Line material such as ACSR dog conductor (15000 mtr.), 33 KV V type cross arm (45 no.), MS Channel Top/Droper/Brasing LS scrap (234 Kg), 33 KV Pin insulator with pin (290 no.), Disc insulator (100 No.), Disc fitting (84 No.) |
| 60 | PART-B (SHIFTING OF 11 KV LINE) |
| 61 | Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :- |
| 62 | ST Pole 11 Mtr. Long. |
| 63 | Line material such as MS Channel 125x65x6x1300 for T-off channel (20 Nos.) + 100x50x2600 Dropper(163 Nos.) + 125x65x2240 for Top channel (241 Nos.) + 125x65x3200 with Clamp for Top (245 Nos.), MS angle 75x75x6x2028 pipe angle(15 No.)+ 65x75x6x2028 TF Base (15 No.) + 65x65x6x2700 for Brassing (39 set), X-arm V type (70 No.), Guarding angle X arm (70 No.), Guarding channel clamp (102 No.), G.I. Thimble (41 No.), 11 KV pin insulator with pin (1100 No.), 11 KV disc insulator T&C type (430 No.), 11 KV disc fitting (430 Kg.), 11 KV disc insulator B&S type (20 No.), 11 KV disc fitting B&S type (20 No.), Stay set Complete (296 No.), ACSR dog conductor (18600 mtr.), 11 KV lightening aresstor (11 no.), 11KV TPMO (11 no.), 11 KV Fuse Set (11 No.), 11 KV cable jointing kit outdoor box (685 no.), 11 KV cable jointing kit straight through (28 No.), MS Earthing Rod complete (192 No.) |
| 64 | 11 KV XLPE Cable 3x185 sq.mm |
| 65 | Cartage of following material from JE, Store to site of work on day to day basis as per requirement of site ( including loading & unloading at both ends maximum distance up to 10-15 Km.) :- |
| 66 | ST Pole 11 Mtr. Long. |
| 67 | Line material such as MS Channel 125x65x6x1300 for T-off channel (20 Nos.) + 100x50x2600 Dropper(163 Nos.) + 125x65x2240 for Top channel (241 Nos.) + 125x65x3200 with Clamp for Top (245 Nos.), MS angle 75x75x6x2028 pipe angle(15 No.)+ 65x75x6x2028 TF Base (15 No.) + 65x65x6x2700 for Brassing (39 set), X-arm V type (70 No.), Guarding angle X arm (70 No.), Guarding channel clamp (102 No.), G.I. Thimble (41 No.), 11 KV pin insulator with pin (1100 No.), 11 KV disc insulator T&C type (430 No.), 11 KV disc fitting (430 Kg.), 11 KV disc insulator B&S type (20 No.), 11 KV disc fitting B&S type (20 No.), Stay set Complete (296 No.), ACSR dog conductor (18600 mtr.), 11 KV lightening aresstor (11 no.), 11KV TPMO (11 no.), 11 KV Fuse Set (11 No.), 11 KV cable jointing kit outdoor box (685 no.), 11 KV cable jointing kit straight through (28 No.), MS Earthing Rod complete (192 No.) |
| 68 | 11 KV XLPE Cable 3x185 sq.mm |
| 69 | Erection of Double Pole 11 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil by providing of stone pad including Fabrication and fixing of Top/Droper/Base channel on double pole suitable for all 11 KV line accessories Complete. |
| 70 | Fixing of TPMO on newly constructed double pole |
| 71 | Fixing Fuse Set on newly constructed double pole |
| 72 | Erection of Single Pole 11 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil by providing of stone pad including back filling of the pole with proper ramming after completion of work. |
| 73 | Fabrication and fixing of Single pole suitable for 11 KV line accessories Complete. |
| 74 | Fabrication and fixing of V type X arm |
| 75 | Grouting of ST Pole 11 mtr. Long |
| 76 | Earthing of each 11 KV line Pole after drive of electrodes of size 20mm x 250 mm and connection the earthing point with GI wire. |
| 77 | Laying lifting stringing of proper sagging of ACSR Dog conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly. |
| 78 | Stay Set complete for 11 KV line alongwith fixing of 11 kv disc insulator |
| 79 | Extra stay for angle location alongwith conecreating |
| 80 | Providing & fixing of HDPE pipe 6"" dia. for laying of underground 11 KV XLPE 3x185 sq.mm.. cable complete work in all respect |
| 81 | Providing & fixing of G.I. pipe 6"" dia.( supporting for cable for DP 24 Mtr. each) |
| 82 | Laying of 11 KV XLPE 3x185 Sq.mm. cable across in HDPE pipe 6"" dia. complete work in all respect |
| 83 | Laying of 11 KV XLPE 3x185 Sq.mm. cable other then under ground cable |
| 84 | Re-installing of old 25/63 KVA T/f as follows |
| 85 | Dismentling and dismounting of 25/63 KVA T/F with the help of Chain pully block |
| 86 | Shifting and cartage of 25/63 KVA T/F from work site to Safe side with loading and unloding etc and back cartage to the newly proposed double pole side |
| 87 | Mounting/Installation on the newly errected double pole 25/63 KVA T/F with the help of chain pulley block |
| 88 | Re-installing of old 100/250 KVA T/f as follows |
| 89 | Dismentling and dismounting of 100/250 KVA T/F with the help of Crain |
| 90 | Shifting and cartage of 100/250 KVA T/F from work site to Safe side with loading and unloding etc and back cartage to the newly proposed double pole side |
| 91 | Mounting/Installation on the newly errected double pole 100/250 KVA T/F with the help of Crain |
| 92 | Water level earthing |
| 93 | Dissmentling of ST pole/R.S. Joist by digging the pits & removal of complete 11 KV line accessories. |
| 94 | Removal of ACSR Dog Conductor after opening the binding and making coil properly |
| 95 | Removal of V type X arm |
| 96 | Removal of MS Channel & Angle, (Top/Dropper/Base) |
| 97 | Removal of 11 KV Pin Insulator with Pin |
| 98 | Removal of 11 KV Disc Insulator with fitting |
| 99 | Guarding of line with G.I. wire having 2 no. horizontal wire & 3 Mtr distance of laces of 6 SWG/8 SWG G.I. wire complete work in all respect. |
| 100 | Providing and fixing of Guarding channel clamp |
| 101 | Providing and fixing of MS clamp suitable for T-off channel |
| 102 | Providing & fixing of Aluminum Jointing Sleeves |
| 103 | Providing and fixing of MS clamp suitable for V type X arm |
| 104 | Providing and fixing F-Bracket for 11 KV |
| 105 | Providing and fixing E-Bracket for 11 KV |
| 106 | Providing and fixing of Holding clamp suitable for Top Channel/TPMO/Fuse set off size |
| 107 | Providing and fixing of MS clamp with Nut & Bolt |
| 108 | Providing & fixing of Aluminum tape |
| 109 | Providing & fixing of Empire tape |
| 110 | Providing & fixing of IIT tape |
| 111 | Providing & fixing of Fuse wire 16 SWG |
| 112 | Providing & fixing of Fuse wire 18 SWG |
| 113 | Providing and fixing of Earth wire clamp. |
| 114 | Providing and fixing of PG Clamp for dog conductor |
| 115 | Providing and fixing of Eye bolt 12x100 sq.mm. |
| 116 | Providing and fixing of Bolt and Nuts. |
| 117 | Providing and fixing of Danger Plate with clamp |
| 118 | Providing and fixing of Number Plate with clamp |
| 119 | Providing and fixing of Barbed wire |
| 120 | Providing & painting of Red oxide |
| 121 | Providing & painting of aluminium paint |
| 122 | Providing and fixing of aluminium lugs long barrel, off size |
| 123 | Providing and fixing of copper L piece |
| 124 | Providing and fixing of Earthing strip |
| 125 | Providing & fixing of pipe jointing coupler |
| 126 | Back cartage from site of work to JE store/Dump Site including loading & unloading at both ends:- |
| 127 | A) ST Pole/R.S Joist from work site central to store meerut |
| 128 | B) Line material such as ACSR weasel conductor (8100 mtr.), 11 KV V type cross arm (150 no.), MS Channel Top/Droper/Brasing LS scrap (400 Kg), 11 KV Pin insulator with pin (56 no.), Disc insulator with fitting (78 No.) |
| 129 | Back cartage from JE store/Dump Site to Central Store Meerut including loading & unloading at both ends:- |
| 130 | A) ST Pole/R.S Joist from work site central to store meerut |
| 131 | B) Line material such as ACSR weasel conductor (8100 mtr.), 11 KV V type cross arm (150 no.), MS Channel Top/Droper/Brasing LS scrap (400 Kg), 11 KV Pin insulator with pin (56 no.), Disc insulator with fitting (78 No.) |
| 132 | PART-C (SHIFTING OF LT LINE) |
| 133 | Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends maximum distance up to 40 Km. :- |
| 134 | PCC pole 9 Mtr. Long. |
| 135 | Line material such as Cable LT ABC 3x120-1x95+1x16 mm. (1560 mtr.), AL lugs long Barrel of size(90 No.), Dead & clamp with i-hook (47 No.), Suspension clamp with I-hook (81 No.), Distribution Box I phase (30 No.), Distribution Box 3 phase (21 No.), Ms chanel 100x50x2240 for Top (10 Nos.) + 100x50x2240 Dropper(72 Nos.) MS angle 75x75x6x2028 supporting (32 No.)+ 65x75x6 mm bracing (32 No.), LT piercing connector for size 120/95 (112 No.) + size 120/35 (100 No.) + size 95/50 (100 No.) + size 95/95/50 (100 N0.) + size 95/50/35 (100 No.), PG Clamp for neutral charding (201 No.), Ms Flat iron (200 Kg.), Stone pad (145 No.), Stay set Complete (110 No.), ACSR weasel conductor (1560 mtr.), Aluminum Binding wire (212 Kg.), Neutral Cum earth wire (76 Kg.), |
| 136 | LT XLPE Cable 3.5x240 sq.mm |
| 137 | Cartage of following material from JE, Store to site of work on day to day basis as per requirement of site ( including loading & unloading at both ends maximum distance up to 10-15 Km.) :- |
| 138 | PCC pole 9 Mtr. Long. |
| 139 | Line material such as Cable LT ABC 3x120-1x95+1x16 mm. (1560 mtr.), AL lugs long Barrel of size(90 No.), Dead & clamp with i-hook (47 No.), Suspension clamp with I-hook (81 No.), Distribution Box I phase (30 No.), Distribution Box 3 phase (21 No.), Ms chanel 100x50x2240 for Top (10 Nos.) + 100x50x2240 Dropper(72 Nos.) MS angle 75x75x6x2028 supporting (32 No.)+ 65x75x6 mm bracing (32 No.), LT piercing connector for size 120/95 (112 No.) + size 120/35 (100 No.) + size 95/50 (100 No.) + size 95/95/50 (100 N0.) + size 95/50/35 (100 No.), PG Clamp for neutral charding (201 No.), Ms Flat iron (200 Kg.), Stone pad (145 No.), Stay set Complete (110 No.), ACSR weasel conductor (1560 mtr.), Aluminum Binding wire (212 Kg.), Neutral Cum earth wire (76 Kg.), |
| 140 | LT XLPE Cable 3.5x240 sq.mm |
| 141 | Erection of Single Pole 9 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil by providing of stone pad including back filling of the pole with proper ramming after completion of work. |
| 142 | Fabrication and fixing of Single pole suitable for LT line accessories Complete. |
| 143 | Earthing of each Lt line Pole after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GL wire. |
| 144 | Laying lifting stringing of proper sagging of ACSR weasel conductor for 3 phase, 3 wire LT line including binding & jumpering properly. |
| 145 | Stay Set complete for LT line alongwith Concreating and fixing of LT disc insulator |
| 146 | Extra stay for angle location alongwith conecreating |
| 147 | Providing & fixing of GI pipe 6"" dia. for laying of underground LT XLPE 3.5x240 sq.mm. cable complete work in all respect |
| 148 | Providing & fixing of H.D.P.E pipe 6"" dia.( supporting for cable for DP 24 Mtr. each) |
| 149 | Laying of LT XLPE 3.5x240 sq.mm. cable other then under ground cable |
| 150 | Grouting of ST pole in BB concreting ratio 1:4:8 in block of size 0.45x0.45x1.6 mtr. |
| 151 | Dissmentling of ST pole/R.S. Joist by digging the pits & removal of complete LT KV line accessories. |
| 152 | Removal of ACSR weasel Conductor after opening the binding and making coil properly |
| 153 | Removal of I-hook clamp |
| 154 | Removal of Dead & clamp |
| 155 | Removal of Suspension clamp |
| 156 | Providing and fixing of Holding clamp |
| 157 | Providing and fixing of Nut & Bolt off size |
| 158 | Providing & painting of Red oxide |
| 159 | Providing & painting of aluminium paint |
| 160 | Providing & fixing of pipe jointing coupler |
| 161 | Providing & fixing of HT tape |
| 162 | Providing & fixing of Empire tape |
| 163 | Providing & fixing of Aluminum tape |
| 164 | Providing and fixing of Earth wire clamp. |
| 165 | Providing and fixing of PVC Tape. |
| 166 | Providing and fixing of J-Hook |
| 167 | Providing and fixing of Dead & clamp |
| 168 | Providing and fixing of Suspension clamp |
| 169 | Providing and fixing of Loop guard |
| 170 | Providing and fixing of Spacer LT PVC |
| 171 | Back cartage from site of work to JE store/Dump Site including loading & unloading at both ends:- |
| 172 | A) ST Pole/R.S Joist from work site central to store meerut |
| 173 | B) Line material such as ACSR weasel conductor (3000 mtr.), I-hook clamp (20 no.), Dead & Clamp (20 no.), Suspension Clamp (250 no.) |
| 174 | Back cartage from JE store/Dump Site to Central Store Meerut including loading & unloading at both ends:- |
| 175 | A) ST Pole/R.S Joist from work site central to store meerut |
| 176 | B) Line material such as ACSR weasel conductor (3000 mtr.), I-hook clamp (20 no.), Dead & Clamp (20 no.), Suspension Clamp (250 no.) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
