}

Renovation Of Existing Entrance Gate And Raising Of Existing Size Stone Masonry Compound Wall ( Kalidasa Road ) At M.G Halli Campus, Csir-Cftri, Mysuru, CSIR-CFTRI, MYSURU-Karnataka

Council Of Scientific And Industrial Research-CSIR has published Renovation Of Existing Entrance Gate And Raising Of Existing Size Stone Masonry Compound Wall ( Kalidasa Road ) At M.G Halli Campus, Csir-Cftri, Mysuru. Submission Date for this Tender is 13-12-2021. Masonary Work Tenders in CSIR-CFTRI, MYSURU Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

30126113
Renovation Of Existing Entrance Gate And Raising Of Existing Size Stone Masonry Compound Wall ( Kalidasa Road ) At M.G Halli Campus, Csir-Cftri, Mysuru
Open Tender
Indian
Karnataka
CSIR-CFTRI, MYSURU
13-12-2021

Tender Details

Renovation Of Existing Entrance Gate And Raising Of Existing Size Stone Masonry Compound Wall ( Kalidasa Road ) At M.G Halli Campus, Csir-Cftri, Mysuru

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
INR 25.61 Lakhs /-

BOQ Items

Name of Work: "Renovation of existing entrance gate and raising of existing size stone masonry compound wall (Kalidasa road) at M.G Halli Campus, CSIR-CFTRI, Mysuru"
Sl. No. Item Description
1PART- A : CIVIL WORKS
2Clearing jungle including uprooting of rankvegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
3Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.
4Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
5Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
6Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
7Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar
8Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
9Cutting and removing of tree roots of girth more than 30cm including earth work excavation, refilling and compaction.
10Removing mortar from and cleaning stones and concrete articles(net quantity of stacks of cleaned materails will be measured): In cement mortar
11Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
12Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil
13Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 M sand)
14Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 M sand : 8 graded stone aggregate 40 mm nominal size)
15Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 M sand: 3 graded stone aggregate 20 mm nominal size)
16Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 M sand : 6 graded stone aggregate 20 mm nominal size)
1715 mm cement plaster on the rough side of single or half brick wall of mix : Internal Plaster 1:4 (1 cement: 4 M sand)
1815 mm cement plaster on rough side of single or half brick wall of mix: External Plaster 1:4 (1 cement: 4 M sand)
1912 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 M sand)
2012 mm thick and 150mm depth plain cement mortar bands in cement mortar 1:4 (1 cement : 4 M sand): Flush Band
21Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 M sand : 3 graded stone aggregate 20 mm nominal size).
22Laying coursed rubble masonry of existing/ dismantled coursed rubblestones for masonry works with hard stone in super structure above plinth level and upto floor five level. Masonry work (second sort), in cement mortar 1:6 (1 cement : 6 Manufactured sand) Note:Coursed rubble stones will be supplied by Dept.
23Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 M sand)
24Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 M sand)
25Pointing on stone work with cement mortar 1:3 (1 cement : 3 M sand) : Flush/ Ruled pointing
26Cement concrete pavement with 1:2:4 (1 cement : 2 Msand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.
27Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
28Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform
29Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Make: Vizag/ Appolo/ JSW
30Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Make: INDUS/ TATA
31Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Steel will be supplied by the dept.)
32Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) MAKE: JINDAL
33Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) MAKE: JINDAL
34Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) (Pin Headed/ Plain) MAKE: SAINT GOBIAN OR MODI
35Providing and laying vitrified floor tiles in different sizes (Minimum 10 mm thickness) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm MAKE: SOMANY/ KAJARIA
36Providing two legged scaffolding for stone maonsry work/ fabrication work/ fencing work etc.,using 10 - 15 cm dia best quality casurina poles of 4 mtr overall length(3+0.5m projection + 0.5m into the ground), the distance between two rows being 1.5m spacing of posts being 2 mtr in both rows with 2 horizontal posts with 0.5 mm overlap on either side and braces at 2 mtr centre to centre including longitudinalstransiveres middle braces to step up and provide platform of width upto 1.2 mtrs wide casurina poles, forms tide up usingcoir rope complete as per specifications.
37Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 M sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
38Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work Make : asian apcolite
39Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work Make : asian apcolite
40Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) MAKE: asian (Apex)
41Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats Recommended brand: asian/NEROLAC
42Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer Make: asian or Nerolac or Dulux
43Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make: asian
44Carriage of material by mechanical transport including loading, unloading and stacking at CFTRI auction yard Steel Lead upto 3 km
45Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead for all lead upto 10 kms including all lifts involved.
46PART- B : ELECTRICAL WORKS
47Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C.
48Supply, fixing of PVC / Metal Heavy duty wall mounting fan with remote on existig wall by using suitable hardwares with wiring connections etc. ready to use. (MAKE : CROMPTON-HIGH FLO / BAJAJ / ALMONARD.
49Supply of 2.0 Core x 10.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armouredconductor cable of 1.1 KV grade as required. Make: Polycab.
50Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm
51Supplying and fixing of 25mm dia medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
52Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm.
53Supplying and fixing 6way (Double Door), single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
54Supplying and fixing 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Double Pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
55Supplying and fixing 16 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single Pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.
56Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick (Depth of 6.5feet )including accessories, and providing masonry enclosure (1.5x1.5ft. Brick Muffling and plastering) with cover plate having locking arrangement and watering pipe of 2.1 metre long etc. with charcoal / coke and salt as required as per IS-3043 ,as per direction of E-I-C.
57Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required
58Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
59Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as requiredMake: APOLLO / JINDAL. a) 50mm dia.
60Supply,Installation, testing and commissioning of 4ft, 20/25W, LED tube light fitting with LED tube on wall with wiring connections etc. ready to use. Make : CROMPTON / PHILIPS / HAVELLS / BAJAJ.
61Supply and fixing of Focus light single phase, AC supply, 230V, 50Hz, 10W suitable for tilting angle 120 degree to 140 degree, confirming to IP-65, colour of light : Warm, Make : PHILIPS Model No. : BVP131 / its equivalent.
62Supply of 09 Mtrs. long, RCCPole for erecting 11KV HT line
63Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 8.0 metre and upto 10.0 metre
64Supply,Installation, testing and commissioning of 20/25W, LED Street light fitting on existing Electric pole with suitable size GI bend pipe with wiring connections etc. ready to use. Make : CROMPTON / PHILIPS /BAJAJ.
65Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
66Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail