Rural Development Department has published Construction / Retrofitting Of Pws Scheme At Nisarale, Tal.Dist- Satara. Submission Date for this Tender is 10-12-2021. Water Supply Project Tenders in Satara Maharashtra. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Sub Work No. 1 :- Strenthning Supply Well |
2 | ITEM NO -1 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete |
3 | ITEM NO -2 Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete |
4 | ITEM NO -3 Providing and laying in situ following grades of CC of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including deswatering form work, compacting and curing finishing etc. complete |
5 | M-150 Grade |
6 | Item No 4-Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steelfixtures and fastenings and handles on both sides and finishing with oilpainting 3 coats complete. |
7 | ITEM NO. 5 - Providing structural steel work in single stanchions composed of RSJ, channel,etc. with caps, bases,mild steel plates, angles, brackets , cleats, gusset plates ,anchor bolts,etc.as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position,making riveted/ bolted/ welded connections and one coat of anti corrosive paint and over it two coats of oil painting, etc. complete. |
8 | Providing laying MS ladder |
9 | Sub Work No. 2 :- Pump House ( 3.0 x 3.0 x 3.0 M) |
10 | Item No 1 - Excavation for foundatio / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removingthe excavated material upto a distace of 50 metres and lifts as below, stackig and spreading as directed, manual dewatering, preparing the bed for foundation and excluding, backfilling, etc. complete. |
11 | (A) Soil |
12 | (B) H.M. |
13 | Item No 2 -Providing & laying in situ M-150 grade of CC of trap/ granite/quartzite/ gneiss metal for foundation & bedding including dewatering formwork compacting & curing finishing comp |
14 | Item No 3- Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. |
15 | (A) Foundation Footing RCC M-200 |
16 | (B) Column RCC M-200 |
17 | (C ) Beam & Lintel |
18 | (D) Roof Slab |
19 | (E) Chajja |
20 | Item No 4 - Providing and fixing in position steel bar reinforcement in position steel bar reinforcement of various diameters for R.C.C. Piles, caps, footings, foundatio-ns, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copints, fins, drawings, and schedules, including cutting, bending, hooking the bars, binding with wires or tack weldingand supporting as required etc. complete. |
21 | Item No-5 Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. |
22 | Item No.6 - Providing second class Burnt Brick masonry withconventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding Comp. |
23 | For Foundation And Plinth |
24 | For SuperStructure |
25 | Item No 7-Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steelfixtures and fastenings and handles on both sides and finishing with oilpainting 3 coats complete. |
26 | Item No 8 - Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating/glazing with plain obscured glasspane and of approved type and quality and fixtures and fastenings, without teak wood boxing and architraves and finishing with oil painting two coats complete. |
27 | Item No 9- Providing internal cement plaster 12 mm thick in a single coats in cement mortar 1:3without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. |
28 | Item No 10 - Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonary surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick inortion 1:1 1/ 2:3 including scaffolding and fourteen days curing complete. |
29 | Item No 11 -Rough shahabad flooring 25 mm to 30 MM |
30 | Item No 12 - Providing and applying washable distemper of approved colour and shade to old / new surfaces including scaffolding, preparing the surface to receive the printing coat and finishing coat etc. complete. |
31 | Item No 13- Providing and applying waterproof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary and preparing the surface curing etc. complete. |
32 | Sub Work No. 3 :- Pumping Machinary |
33 | Item No. 1 - Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding.Pump shall be suitable fopr various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415 V+/- 10%, Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraullc thrust.The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer"sdesign.Antithrust stream lined non return valve shall be provided with the pump 3 m. Submersible copper conductor cable, in single/double run and 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump. |
34 | A) 7.50HP Submerssible Pumpset |
35 | Item No. 2 - Providing & fixing valves of following dia. Including all taxes central & local transportationall matrial & labour charges etc. comp. |
36 | (A) 65mm dia Sluice Valve |
37 | (B) 65 mm dia Reflux Valve |
38 | Item No. 3 - Providing & Supplying & layingISI mark GI Pipe of 65 mm dia GI med.class and dia including all local and central taxes, octroi, inspection charges transportation to stores all labour worketc. complete65 mm Dia GI pipe |
39 | Item No. 5- Providing ISI mark GI Bend of 65 mmclass and dia including all local and central taxes, octroi, inspection charges transportation to stores etc. complete (IS- 1239-2004) |
40 | Item No. 6- Providing & fixing MS flanged specials including all matrial & labour charges etc. comp. |
41 | Item No. 7 :- L.T. Control Panel Board - Designing, Providing , Errecting, Testing & Commissioning with Satsfactory Test & Trial ofVarious Panel Boards as per detailed specifications. |
42 | 1) MS sheet fabricated box for panel board |
43 | 2) Self Locking arrangement |
44 | 3) Marine water proof plywood |
45 | 4) ELCB 63Amp 4 Pole |
46 | 5) Volt Meter |
47 | 6) Ammeter |
48 | 7) Capacitor polypropylene condenser |
49 | 8) Pilot Lamp Set |
50 | 9) DOL starter |
51 | 10) Metal clad TPN switch 63 Amp |
52 | 11) Iton meatclad change over switch 63Amp |
53 | 12) EarthingGI Plate 0.6 x 0.6 x 0.6, charcoal |
54 | Item No. 8 :-Cables - Providing & Fixing Submersible cable 3 core 6 Sq. mm |
55 | Item No.9 :- Providing structural steel work in single stanctions composed of RSJ channel, etc., with caps, bases, mild steel plates, angles, brackets, cleats, gusset, plates, anchor bolts, etc. as per detailed design, drawings, or as directed by Engineer-in-charge including cutting, fabricatings, hoisting, erecting, fixing in possition, making riveted. bolted/welded connections etc, complete. |
56 | SUB WORK NO.4- Rising Main |
57 | ITEM NO 1- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete |
58 | 90mm dia.HDPE. 10 kg/cm2 Pipe |
59 | ITEM NO.2- Providing & SupplyingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportationetc. comp. |
60 | A} 80 mm dia. G.I. pipe med. Class |
61 | ITEM NO.3- Excavation for foundation in following strata including removeing the excavated material upto a distance of 50 m. & lift as below including stacking & spreading etc. comp. |
62 | (A) SOIL |
63 | (B) HARD MURUM |
64 | (C) Soft Rock |
65 | (D) Hard Rock |
66 | ITEM NO.4 - Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation in 15 to 20 cm. layers including watering & compaction etc. comp. |
67 | ITEM NO 5 - Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 |
68 | 80mm dia.HDPE. 6 kg/cm2 Pipe |
69 | ITEM NO.6- Providing & Supply of Electro Fusion Fittings inaccordance with BS EN12201: Part-3 suitable fordrinking water with in black/ blue colourmanufactured from compounded PE80/ PE100virgin polymer and compatible with PE80/PE100pipes, in pressure rating SDR11 with min PN12.5rated for water application and shall be inclusive of all cost such as testing, inspection charges,transportation up to store, transit insurance,loading, unloading, stacking excluding GST leviedby GOI & GOM in all respect, etc. complete. |
70 | A) Coupler |
71 | 110 mm dia |
72 | B) Elbow 90 degree |
73 | 110 mm dia |
74 | C) Elbow 45 degree |
75 | 110 mm dia |
76 | D) Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint |
77 | 110 mm dia |
78 | ITEM NO.7- Lowering , laying & jointing G.I. pipes of following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
79 | A} 80 mm dia. G.I. pipe med. Class |
80 | ITEM NO.8- Refilling the excavated trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm. layer with all lead & lift consolidaton surcharging etc. comp. |
81 | ( MJP CSR 2021-22 I/P No. 15/45 ) |
82 | ITEM NO 9 Providing and supplying Air Valves as per IS-10845 and MJP"s standard specifications of approved make and quality of following diameters including all taxes (Central and local), railway freight, inspection charges, unloding from railway wagons, loading into truck, transportation upto departmental stores / site, unloding and stacking etc. complete. Air Valve Single Ball Flanged / Screwed Type - PN -1.0 |
83 | 20 mm dia. single ball Air Valve |
84 | ITEM NO 10 - Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position |
85 | 90mm dia.HDPE. 6 kg/cm2 Pipe |
86 | ITEM NO. 11 - Providing structural steel work in single stanchions composed of RSJ, channel,etc. with caps, bases,mild steel plates, angles, brackets , cleats, gusse tplates ,anchor bolts,etc.as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position,making riveted/ bolted/ welded connections and one coat of anti corrosive paint and over it two coats of oil painting, etc. complete. |
87 | ITEM NO. 12 -Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. |
88 | Item no 13 - Providing and making crosss connection 80 mm dia |
89 | Sub Work No. 5 :- RCC ESR |
90 | Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C. I. manhole frame and covers water level indicatiors, lightening conductor, G. I. pipe railing around walk way and top slab, providing spiral staire case from ground level to roof level, M.S.Grill gate of 2 Mtrs height with locking arrangement, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab and epoxy paint to internal surface & anti-termite treatment forunderground parts of the structures and giving satisfactory water tightness test as per I.S. code, The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge |
91 | ESR Capacity - 59000 litrs 9m Staging Height |
92 | Total for 59000 lit |
93 | Item No. 2 - Providing and supplying at site of work CI D/F valves of following dia., including cost of all taxes (central and local) railway freight, unloading from railway wagon, loading into truck, transportation upto site of work, etc. complete |
94 | (A) 100 mm dia Sluice Valve PN 1.0 |
95 | Item No. 3 - Providing and supplying ISI mark GIpipesof following class and diameter including all taxes (Central and local),loadingunloading, stacking,transportation to site etc. complete |
96 | (A) 100 mm dia G. I. Pipe Med Class |
97 | B) Specials |
98 | (i) GI TEE (100 mm) |
99 | (ii) GI BEND (100 mm) |
100 | (iii) FLANGES |
101 | Sub Work No. 6 :- Filter Room( 5.0 x 4.0 x 3.0 M) |
102 | Item No 1 - Excavation for foundatio / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removingthe excavated material upto a distace of 50 metres and lifts as below, stackig and spreading as directed, manual dewatering, preparing the bed for foundation and excluding, backfilling, etc. complete. |
103 | (A) Soil |
104 | (B) H.M. |
105 | Item No 2 -Providing & laying in situ M-150 grade of CC of trap/ granite/quartzite/ gneiss metal for foundation & bedding including dewatering formwork compacting & curing finishing comp |
106 | Item No 3- Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. |
107 | (A) Foundation Footing RCC M-200 |
108 | (B) Column RCC M-200 |
109 | (C ) Beam & Lintel |
110 | (D) Roof Slab |
111 | (E) Chajja |
112 | Item No 4 - Providing and fixing in position steel bar reinforcement in position steel bar reinforcement of various diameters for R.C.C. Piles, caps, footings, foundatio-ns, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copints, fins, drawings, and schedules, including cutting, bending, hooking the bars, binding with wires or tack weldingand supporting as required etc. complete. |
113 | Item No-5 Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. |
114 | Item No.6 - Providing second class Burnt Brick masonry withconventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding Comp. |
115 | For foundation and plinth |
116 | For Superstructure |
117 | Item No 7-Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steelfixtures and fastenings and handles on both sides and finishing with oilpainting 3 coats complete. |
118 | Item No 8 - Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating/glazing with plain obscured glasspane and of approved type and quality and fixtures and fastenings, without teak wood boxing and architraves and finishing with oil painting two coats complete. |
119 | Item No 9- Providing internal cement plaster 12 mm thick in a single coats in cement mortar 1:3without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. |
120 | Item No 10 - Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonary surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12 mm thick inortion 1:1 1/ 2:3 including scaffolding and fourteen days curing complete. |
121 | Item No 11 -Rough shahabad flooring 25 mm to 30 MM |
122 | Item No 12 - Providing and applying washable distemper of approved colour and shade to old / new surfaces including scaffolding, preparing the surface to receive the printing coat and finishing coat etc. complete. |
123 | Item no 13 - Providing and applying waterproof cement paint ..etc complete |
124 | Sub work No- 7 Online Filter |
125 | Providing and Fixing Package type Filter of capacity 10,000 lit per hr. including Raw water Transfer Pump,MS Filter vessal,Micron Cartridge Filter Of replaceable spun type slim type of rating 5 micron with warranted for period of 12 month fromdate of commission labour,installetion and satisfactory hydraulic test as directed by site in charge |
126 | SUB WORK NO.8- Distribution System |
127 | ITEM NO.1-Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete |
128 | 110mm dia.HDPE. 6 kg/cm2 Pipe |
129 | 90 mm dia.HDPE. 6 kg/cm2 Pipe |
130 | 75 mm dia. HDPE. 6 kg/cm2 Pipe |
131 | ITEM NO.2 - Providing & supplying Sluice Valve of following dia. Including all taxes central & local transportation to site loading unloading etc. comp. |
132 | [A]100 mm dia.Sluice Valve |
133 | [B]80 mm dia.Sluice Valve |
134 | ITEM NO.3- Providing & SupplyingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportationetc. comp. |
135 | A} 100 mm dia. G.I. pipe med. Class |
136 | B} 80 mm dia. G.I. pipe med. Class |
137 | C} 65 mm dia. G.I. pipe med. Class |
138 | ITEM NO.4 - Providing & Supply of Electro Fusion Fittings inaccordance with BS EN12201: Part-3 suitable fordrinking water with in black/ blue colourmanufactured from compounded PE80/ PE100virgin polymer and compatible with PE80/PE100pipes, in pressure rating SDR11 with min PN12.5rated for water application and shall be inclusive of all cost such as testing, inspection charges,transportation up to store, transit insurance,loading, unloading, stacking excluding GST leviedby GOI & GOM in all respect, etc. complete. |
139 | A) Coupler |
140 | 110 mm dia |
141 | 90mm dia |
142 | 75mm dia |
143 | B) Equal tee |
144 | 110 mm dia |
145 | 90mm dia |
146 | 75mm dia |
147 | C) Reducer |
148 | 110X90 mm |
149 | 110X75 mm |
150 | 90X 75 mm |
151 | D) Elbow 90 degree |
152 | 110 mm dia |
153 | 90 mm |
154 | 75 mm |
155 | E) Elbow 45 degree |
156 | 110 mm dia |
157 | 90 mm |
158 | 75 mm |
159 | G) Spigot Long Neck Pipe End (Stub End) for Electro Fusion joint |
160 | 110 mm dia |
161 | 90 mm |
162 | 75 mm |
163 | ITEM NO.5- Excavation for foundation in following strata including removeing the excavated material upto a distance of 50 m. & lift as below including stacking & spreading etc. comp. |
164 | (A) SOIL |
165 | (B) HARD MURUM |
166 | (C) Soft Rock |
167 | (D) Hard Rock |
168 | ITEM NO.6 - Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation in 15 to 20 cm. layers including watering & compaction etc. comp. |
169 | ITEM NO 7 - Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 |
170 | 110mm dia.HDPE. 6 kg/cm2 Pipe |
171 | 90 mm dia.HDPE. 6 kg/cm2 Pipe |
172 | 75 mm dia. HDPE. 6 kg/cm2 Pipe |
173 | ITEM NO.8- Lowering , laying & jointing in position following dia valves including cost of all labour jointing material including nut bolts and giving satisfactory testing etc comp. |
174 | [A]100 mm dia.Sluice Valve |
175 | [B]80 mm dia.Sluice Valve |
176 | ITEM NO.9- Lowering , laying & jointing G.I. pipes of following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
177 | A} 100 mm dia. G.I. pipe med. Class |
178 | B} 80 mm dia. G.I. pipe med. Class |
179 | C} 65 mm dia. G.I. pipe med. Class |
180 | ITEM NO.10- Providing & fixing C.I. road box including loading unloading & carting to site of work including all necessary excavation in all types of strata & fixing in murum packing comp. |
181 | a} 100 mm X 225 mm (20kg) |
182 | ITEM NO.11- Refilling the excavated trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm. layer with all lead & lift consolidaton surcharging etc. comp. |
183 | ITEM NO.12- Hydraulic testing of PVC Pipe line to specified pressure including cost of all material and labour and water for testing for specified length including cutting placing end caps making arrangement for filling safe water using reciprocating type pumps which should be abel to provide specified test pressure gauges and other necessary equipment labour operartion charges etc. required for testing the rate under this item shall also include cost of retesting if necessary and reinstarting to orignal position. |
184 | 110mm dia.HDPE. 6 kg/cm2 Pipe |
185 | 90 mm dia.HDPE. 6 kg/cm2 Pipe |
186 | 75 mm dia. HDPE. 6 kg/cm2 Pipe |
187 | ITEM NO.13- Hydraulic testing of GI Pipe line to specified pressure including cost of all material and labour and water for testing for forlength upto 1 km using reciprocating type pumps which should be abel to provide specified test pressure gauges and other necessary equipment labour operartion charges etc. required for testing the rate under this item shall also include cost of retesting . |
188 | A} 100 mm dia. G.I. pipe med. Class |
189 | B} 80 mm dia. G.I. pipe med. Class |
190 | C} 65 mm dia. G.I. pipe med. Class |
191 | ( MJP CSR 2021-22 I/P No. 3b/83 ) |
192 | ITEM NO.14 - Providing & laying in situ C.C.M-15 of trap metal for foundation & bedding including formwork & compaction etc.comp. |
193 | ITEM NO. 15 - Providing structural steel work in single stanchions composed of RSJ, channel,etc. with caps, bases,mild steel plates, angles, brackets , cleats, gusse tplates ,anchor bolts,etc.as per detailed design and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting, erecting, fixing in position,making riveted/ bolted/ welded connections and one coat of anti corrosive paint and over it two coats of oil painting, etc. complete. |
194 | ITEM NO. 16 - Providing and constructing B.B. masonry valvechamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B.masonry in CM 1:5 proportion precast RCCframe and cover, etc. complete as directed byEngineer-in-charge.As above of 90 x 60 cm internal size anddepth upto 1.2 M with precast R.C.C slab cover. |
195 | ITEM NO. 17 Providing and making cross connection 80mm Dia |
196 | Sub Work No. 9:- Miscellaneous Works |
197 | Item No 1 -Providing and fixing Information sign board of Standard size & Specification etc. comp. |
198 | ITEM NO.2 - Commisioning running & maintaining the scheme to quantites rated capacity including manning necessary persoonel such as requirment of scheme & who should also administer chemical dose for one month together with trainning of persoonel spared by local body & handing over the scheme to local body after completion of above period as directed by Engineer incharge.( For one month) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail