}

Provn Of Retaining Wall And Hard Standing At Hill Top Mess At Satavahana Special Repairs To Spirit Of Ifr Monument At Samudrika Special Repairs To Hadr Ground Rooms And Toilets At Satavahana Demolition Of Existing Rr Masonry Security Wall In Front Of Prov, VISAKHAPATNAM-Andhra Pradesh

Military Engineer Services-MES has published Provn Of Retaining Wall And Hard Standing At Hill Top Mess At Satavahana Special Repairs To Spirit Of Ifr Monument At Samudrika Special Repairs To Hadr Ground Rooms And Toilets At Satavahana Demolition Of Existing Rr Masonry Security Wall In Front Of Prov. Submission Date for this Tender is 20-12-2021. Demolition Work Tenders in VISAKHAPATNAM Andhra Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

30085730
Corrigendum : Provn Of Retaining Wall And Hard Standing At Hill Top Mess At Satavahana Special Repairs To Spirit Of Ifr Monument At Samudrika Special Repairs To Hadr Ground Rooms And Toilets At Satavahana Demolition Of Existing Rr Masonry Security Wall In Front Of Prov
Indian
Andhra Pradesh
VISAKHAPATNAM
20-12-2021

Tender Details

Provn Of Retaining Wall And Hard Standing At Hill Top Mess At Satavahana Special Repairs To Spirit Of Ifr Monument At Samudrika Special Repairs To Hadr Ground Rooms And Toilets At Satavahana Demolition Of Existing Rr Masonry Security Wall In Front Of Provn Of Retaining Wall And Hard Standing At Hill Top Mess At Satavahana Special Repairs To Spirit Of Ifr Monument At Samudrika Special Repairs To Hadr Ground Rooms And Toilets At Satavahana Demolition Of Existing Rr Masonry Security Wall In Front

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 13-Dec-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 20-12-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 93000.0 /-
Tender Value
INR 46.50 Lakhs /-

BOQ Items

Name of Work: PROVN OF RETAINING WALL AND HARD STANDING AT HILL TOP MESS AT SATAVAHANA: SPECIAL REPAIRS TO SPIRIT OF IFR MONUMENT AT SAMUDRIKA: SPECIAL REPAIRS TO HADR GROUND ROOMS AND TOILETS AT SATAVAHANA: DEMOLITION OF EXISTING RR MASONRY SECURITY WALL (IN FRONT OF BLDG NO 117-AP TO 122-AP) AND RECONSTRUCTION OF THE SAME WITH RCC FRAME STRUCTURE SECURITY WALL AT AMZARI PARK UNDER GE (NB) VISAKHAPATNAM
Sl. No. Item Description
1Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/disintegrated rock complete all as specified and directed.
2Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depthfor foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/disintegrated rock complete all as specified and as directed.
3Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/disintegrated rock complete all as specified and directed.
4Removing excavated materials exc 1.5 Km but n. exc 15 Km and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.
5Excavating in post holes (or similar holes) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface in hard/dense soil complete all as specified anddirected.
6M & L for 100 mm thick, plain cement concrete 1:4:8,type D-2 (using 40 mm graded stone aggregate)as in sub-base of flooring, etc complete all as specified and directed.
7M & L for 100 mm thick, Cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in base of flooring/hard standing, etc, complete all as specified and directed.
8M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed.
9M & L for Machine pressed precast conctete interlocking paver block any shape and size, coloured/multicoloured confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed.
10M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.
11M & L for preparing newly plastered/concrete surfaces of walls, etc and applying three coats of white wash complete all as specified and directed.
12M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.
13M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, builtin cement mortar 1:4 as in retaining walls, abutments and similar workcomplete all as specified and directed.
14M & L for Raised pointing to random or polygonal rubble, uncoursed or brought upto coursesin cement mortar 1:4complete all as specified and directed.
15Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, Hammer dressing with maximum depression on face from straight edge held against the dressed surface of granite or trap stonen exc 40mm complete all as specified and directed.
16Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.
17M & L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming toFe.290.Gde-E-165 (Brackets over 10 kg each to be measured under "Structural Steel") complete all as specified and directed.
18Supply only chain link MS galvanisd fencing made of 5.5mm dia wire with and including PVC coating of 1.3mm thickness and mesh size 50mm x 50mm complete all as specified and directed
19Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed
20M & L for Mild Steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® complete all as specified and directed.
21S & F Mild steel screw bolts of 16 to 20 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.
22M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.
23Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.
24Taking up or down 25 or 32 mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.
25Taking up or down 40 or 50mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.
26Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 23 above)
27Refixing of 25 to 32mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 24 above)
28Refixing of 40 or 50mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No.25 above)
29Supply, laying, connection and testing, in repairs, 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
30Supply, laying, connection and testing, in repairs, 40mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
31Supply, laying, connection and testing, in repairs, 50mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
32M & L for Preparation of oldpainted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.
33M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of PU paint (Polyurethane full gloss enamel paint) over a coat of red oxide, zine chrome primer by using airless spray painting method complete all as specified and directed.
34Dismantling ofStone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar and removing rubbish upto a distance outside MD land complete all as directed by the Engr-in-Charge.
35M & L for granite stone slab (of any type) 18 to 20 mm thick (Table rubbed and polished), machine cut, colour Mexican Red/Ruby Red/Z black/Pearl black etc design/pattern as directed including inlays, borders, margins in two or more colours/shades as in steps, jambs, pillars, window cills, cooking platform etc bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 20 mm thick screed bed in cement mortor 1:4 & cutting, polishing complete all as specified and directed. (Note: Single stone slab shall be used for entire length/height of steps, jambs, pillars, window cills, cooking platform etc and joints sahll match with the flooring complete)
36S & F in repairStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed.
37M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and directed.
38M & L for providing and fixing stainless steel (Grade 304) chain of any size in two lines, fixed to SS poles including necessary fixing arragement/welding etc complete all as specified and directed.
39Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.
40Supply, laying, connection and testing, in repairs, 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
41Supply, laying, connection and testing, in repairs, 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
42Supply, laying, connection and testing, in repairs, 32mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
43S & F 20 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
44S & F 25 mm bore, gun metal, globe or Gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
45M & L for Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area exc 400 sq.cm but n.exc 0.10 Sqm complete all as specified and directed.
46Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise superficial area exc 500 Sqcm but n.exc 0.10 Sqm Cutting holes into or through complete all as specified and directed.
47Cutting holes into or through in stone walls built in cement mortar or cement lime mortar and walls of cement concrete of superficial area exc 400 Sqcm but n.exc 0.1 Sqm complete all as specified and directed.
48Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise superficial area exc 250 Sqcm but n.exc 500 Sqcm Cutting holes into or through complete all as specified and directed.
49Taking up 150 mm bore cast iron pipes (including all fittings) with spigot and socket end and lead joints including burning out lead joints and recovering lead complete and keeping serviceable pipes in safe custody for re-use in the work and removing remaining pipes with fittings from site of work complete all as specified and directed by the Engineer-in-Charge.
50Taking up 100 mm bore cast iron pipes (including all fittings) with spigot and socket end and lead joints including burning out lead joints and recovering lead complete and keeping serviceable pipes in safe custody for re-use in the work and removing remaining pipes with fittings from site of work complete all as specified and directed by the Engineer-in-Charge.
51S & F 160 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints, fixed to wall or laid in sunken floor, etc with all fixing accessories completeall as specified and directed.
52S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.
53S & F 75 mm bore, PVC (SWR),Soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc completeall as specified and directed.
54S & F 40 mm bore, PVC (SWR),Soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc completeall as specified and directed.
55S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
56S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed.
57S & F 160 mm bore, PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
58S & F 110 mm bore, PVC (SWR) bends of any radius with oval access door complete all as specified and directed.
59S & F40 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.
60S & F 110 mm bore, PVC (SWR) vent cowl complete all as specified and directed.
61S & F 160 mm bore, PVC (SWR) vent cowl complete all as specified and directed.
62Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed
63M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed.
64M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
65M & L for rendering 15 mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4,mixed with integral water proofing compoundwith weight of cement in top layer as per manufacturer"s instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).
66Supply only integral water proofing compound (ISI marked) complete all as specified and directed.
67M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer and over one or more coats of wall care putty to a smooth surface complete all as specified and directed.
68M & L for preparing old plastered surfaces of walls by complete removal of existing treatment and applying two coats ofdistemper-oil-emulsionover a coat of alkali resistant priming coat over one or more coat of wall care putty complete all as specified and directed.
69M & L for preparation new external surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer as per manufacturer"s instruction and over one or more coats of wall care putty to a smooth surface complete all as specified and directed.
70M & L for preparation old decorated external surfaces of wall, chajja, facia etc by complete removing old paints by mechanical scrubber without disturbing the plastered surfaces and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer as per manufacturer"s instruction over one or more coat of wall care putty complete all as specified and directed.
71M & L for 12 mm thick, Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
72M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
73M & L preparing old decorated surfaces of walls, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of white wash complete all as specified and directed.
74M & L forpost construction Antitermite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.complete all as specified and directed.
75M & L for post construction Antitermite treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
76Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal ofdebris and rubbish to outside MD land complete all as specified and directed.
77M & L for 25 mm thick, plain cement concrete 1:2:4,type B-0 (using 12.5 mm graded stone aggregate)as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.
78M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
79M & L for Virified designed, light shade coloured, Ceramic tiles, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
80M & L for Vitrified, designed, light shade coloured, tiles, 10 mm thick, (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm as in vertical surfaces such as skirting,dado, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over andincluding 10 mm thick bedding in cement mortar 1:4 and necessary cutting of tiles complete all as specified and directed.
81M & L for glazed, coloured, ceramic, tiles of size (600 x 300mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
82M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
83Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above Ground level) and disposal ofdebris and rubbish to a distance upto outside MD land complete all as directed by the Engr-in-Charge
84M & L for 75 mm thick,plain cement concrete1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.
85Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.
86S & F solid PVC door frames of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube complete all as specified and directed.
87S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face fixing in frame at site complete as per specification and drawing and as directed.
88Providing and fixing factory made uPVC white colour fixed window of area exc 1.00 Sqm but n.exc 2.00 Sqm each, made of extruded profiles with wall thickness of 2.3mm(+-0.2mm); Window profile with hollow section with multi chamber; Frame (60mm x 58mm); T profile (Onevertical length in between two shutters) (60mm x 74mm); Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, 5mm thick glazing with selected quality glass complete all as per manufacturer"s instruction and as specified and directed. (Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories, (ii) Net opening will be measured for payment purpose.)
89S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.
90S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
91S & F 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
92S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 250 mm complete all as specified and directed.
93S & F in repair 75 mm bore, PVC (SWR) multi floor trap with grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
94S & F in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
95Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n.exc 10 cm girth complete all as specified and directed.
96Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal ofdebris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge.
97M & L for Brick work with fly ash, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed.
98M & L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls using old size brick complete all as specified and directed.
99S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain andflushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.
100S & F in repairs 20 mm bore, Brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed.
101S & F in repairs, Toilet paper holder, brass, chromium plated fixed to wall with brass screw complete all as specified and directed.
102S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.
103S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed.
104S & F in repair 32 mm dia waste coupling of PTMT (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and directed.
105S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, with long shank and cup, concealed type, screwed downhigh pressure, with chromium plated Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange, screwed both ends for iron pipe or for unions complete all as specified and directed. (Make: Jaquar Cat No. ALD-083 & CON-083FTKor equivalent of make as per List of manufacturer"s)
106S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
107S & F in repairs, 15 mm bore, Stop valves,cast copper alloy,chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
108S & F in repairs 15mm bore, Two Way Bib Cock with Wall Flange, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. LYR-38041 or equivelant of make as per list of manufacturer)
109S & F in repair 15 mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) with all accessories complete all as specified and directed. (Make: Jaquar Cat No. ALD-577 or equivelant of make as per List of manufacturer"s)
110S & F in repair tumbler holder, brass chromium plated, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. (Make: Jaquar Cat No. AQN-7741 or equivelant of approved make)
111S & F in repairstainless steel Grating, 110mm dia fixed with white cement complete all as specified and as directed.
112S & F in repairs, 600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromiun plated brass screws and cup washers complete all as specified and directed.
113S & F1000 litres capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one as specified in SSR Part I and directed.
114S & F in repairs, Vitreous China bowl urinal flat back, of size 465x355x265mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed.
115S & F repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.
116Fixing only in repairs Urinal partitions slabs any type terminating about 40cm above floor line complete with all fixing accessories complete all as specified and directed.
117Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame)complete all as specified and directed.
118Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.
119Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators ncluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene asket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.
120S & F 10mm thick powder coated (minimum 50 micron) anodised aluminiumgrill with aparture size of 105x99mm with suitable F or E section fixed to window/ventilator frame including jointing cleat and necessary fixing arrangementas required complete all as specified and directed. (Make: DECO DG 104 or equivalent approved make)
121M & L for Making good under cills (or over arches, lintels and bressummers) including all pinning as necessary in cement mortar 1:4 complete all as specified and directed.
122M & L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar 1:6 complete all as specified and directed.
123S & F 5 mm thick, tinted sheet glass,ordinary quality and glazing with neoprene rubber beading for aluminium door/window etc in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. (Note: The cost of neoprene rubber beads etc are already included with the cost of respective doors/windows)
124S & FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed.
125S & F Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floorcomplete all as specified and directed.
126S & F Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.
127Surface dressing n.exc 15 cm deep as in soft/loose soil complete all as specified and directed.
128Dismantling GI barbed wire fencing, any type & unserviceable barbed wire complete all as specified and directed.
129Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and directed.
130Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depthfor foundation, etc and getting out in soft/loose soil complete all as specified and directed.
131M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.
132M & L for use & waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work, vertical or to batter complete all asspecified and directed.
133M & L for use & waste Formwork to sides of pillars, posts, struts, piers, columns and stanchionsfor flat rough finished surfaces of concrete complete all as specified anddirected.
134M & L for use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etcetc complete all as specified anddirected.
135M & Lfor Reinforced Cement Concrete M-30 (Design Mix) (using 20 mm graded stone aggregate) as in foundations including rafts, footings, beams and mass concrete, etc complete all as specified and directed. (Note" Reinforcement will be measured and paid seperately)
136M & L for Reinforced Cement ConcreteM-30 (Design Mix) (using 20 mm graded stone aggregate) as in columns, pillars, posts and struts complete all as specified and directed. (Note :Reinforcement will be measured & paid seperately)
137M & L Reinforced Cement ConcreteM-30 (Design Mix) (using 20 mm graded stone aggregate) as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed. (Note :Reinforcement will be measured & paid seperately)
138S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.
139S & F high strength corrosion resistantMild steel TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.
140S & F Rust Proof Consec Zal Super Razor punched barb tape (SRPBT) Aluminium base Helix coil with and including necessary GI fixing clips for securing complete all as specified and directed with the following specifications: (i) Dia of coil (unstretched)- 610mm (ii) No of Spiral - 6 Spirals perRM (iii) Weight of each coil with hassian pack- 8.5 Kg ( +0.5) (iv) Central Core wire - made from 2.6( +0.5)mm dia GI High Tensile wireas per IS-4454 galvanised as per IS-2629 (v) Razor punched strip - Razor punched tape is CONSEC ZAL Steel comprising of Aluminium base with Zinc alloy @ 150 gm/Sqm conforiming to ASTM A-792/A-792M with additional primer treatment of Epoxy/polyurthene & final paint top coat of Caulifield green shade (BSL 139) by Hot Dipping process and Barb Tape length- 23.50mm, Barb Width - 18.6mm, Barb Spacing - 36.00 mm and Centre width- 7.4mm (Note : After stretching the coil, the length of the compound wall on which it has been stretched shall be considered for measurement.)
141S & F Galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete as specified and directed. (Note : Each line of wire to be measured)
142M & L for preparation new external surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer as per manufacturer"s instruction complete all as specified and directed.
143M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement complete all as specified and directed.
144Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting pointcomplete all as specified and directed.
145Taking down carefully unserviceable aluminium/copperpoint wiring (light, fan, socket or power) complete, (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc to be measured separately if found serviceable), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
146Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified anddirected.
147Taking down unserviceable sub-main wiring (any numbers of cable) withrigid steelconduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed.
148M & L for Point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed / surface fitted type including Flush type metal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switchesincluding provision of multistranded 1.5 Sq.mm copper conductorcable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed,for one light/exhaust fan/fan point/call bellcontrolled by one way switch. (Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases (if any) for concealed wiring including making good the same as per the existing one)
149All as per item No. 148 above but forOne 3/5 pin socket outlet 6 amps on independent board complete ditto
150All as per item No. 148 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multistrandedFRLS (ISI marked) and 2.5 sqmm PVC insulated unsheathed solid copper conductor cableFRLS (ISI marked) as earth lead complete ditto
151S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed.
152S & F ceiling rose, 65 X 50mm two to three terminals, PVC/polycarbonate, insolated body complete all as specified and directed.
153S & F Modular socket outlet6A, 2/3 pin combined, 2 module,AC 230V, 50HZ,conforming toIS 1293 :2005 (incl all revisons and amendments). complete all as specified and as directed.
154S & F Modular Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch, AC 230V, 50HZ, complete all as specified and as directed.
155M & L for Sub main wiring with 2 runs of Single core 6 sqmm [ for Phase & Neutral ]PVC insulated multi stranded FRLS (ISI marked) copper cable drawn through and including surface / ceiling / concealed PVC conduit of suitable size with all conduit accesories and fittings along with 1 run of single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cableas earth continuity conductor complete all as specified and as directed. (Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of conduitshall be measured as one length)
156M & L for Sub main wiring with 2 runs of Single core 2.5 sqmm [ for Phase & Neutral ]PVC insulated multi stranded FRLS (ISI marked) copper cable drawn through and including surface / ceiling / concealed PVC conduit of suitable size with all conduit accesories and fittings along with 1 run of single core 2.5 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cableas earth continuity conductor complete all as specified and as directed. (Note :- Two runs of 2.5 sqmm and one runs of 2.5 sqmm cable as earth wire and one run of conduitshall be measured as one length)
157Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as directed.
158Fixing only serviceable light fittings any type including connecting up complete all as specified and directed (Note: Old serviceable light fittings as obtained from serial Item No 157 here -in-before shall be re-used).
159Fixing only in repairs Exhaust Fan any sweep with all fixing accessories and connecting up including provision of cable from ceiling rose/connection to fan complete all as specified and directed.
160S & F Distribution Board, SPN 8 Way, 240V, Double door with IP 54 protection complete all as specified and as directed. (Make: Legrand cat part No. 5076 41 or equivalent make as per List of Manufacturer"s)
161Supply, fixing, commissioning and testing MCB SP 6 to 32 Amps, 240 Volts, 10KA, C Curve,complete all as specified and as directed (Make: Legrand cat part No. 4085 87 to 95 or equivalent make as per List of Manufacturer"s)
162Supply, fixing, commissioning and testing MCB SPN 40-63 Amps, 240 Volts, 10KA, C curve complete all as specified and as directed (Make: Legrand cat part No. 4086 18 to 20 or equivalent make as per List of Manufacturer"s)
163Supply, Install, Testing & Commissioningof 5HP, Non self Priming centrifugal Monoblock water pumping sets, electric driven, 415 Volts, TP, suitable for 33-42 Mtrs head having Brass impeller materials, Discharge 420-180 LPM, Cast iron motor body including suitable core cable of sufficient length (Aprox 50m), connecting from DOL starter to pump complete allall as specified and directed. (Make:-Crompton Cat No. MBNS52 5 HP or equivelant of make as per List of manufacturer"s).
164Supply, install, testing and commissioning 5HP, three phase DOL control panel suitable for pump at Ser item No. above with voltage range 275-475 V, relay range 6-10A complete witth all accessories complete all as specified and directed. (Make: Crompton Cat No. CP60100D or equivelant as per list of manufacturer)
165M & L for Repairs to Panel board indoor type sheet metal approximate size (5 x1.5 x 1.5 Feet"s) parts tinkering the parts and replacing fully corroded sheet metal parts like base plate, top plate, front cover etc with appropriate gauges MS sheet including bending to match with the existing size, welding brazing and assembling including replacing all nuts & bolts in MCBs and proper legging in cable and control wire sheet metal screws metal screws and painting the complete body with two coat of synthetic enamel paint over a coat of Zinc chrome primer and marking the Qtr No, Panel Board No in front side and allas specified and as directed
166M & L for Sub main wiring with 2 runs of Single core 10 sqmm [ for Phase & Neutral ]PVC insulated multi stranded FRLS (ISI marked) copper cable drawn through and including surface / ceiling / concealed PVC conduit of suitable size with all conduit accesories and fittings along with 1 run of single core 10 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cableas earth continuity conductor complete all as specified and as directed. (Note :- Two runs of 10 sqmm and one runs of 10 sqmm cable as earth wire and one run of conduitshall be measured as one length)
167S & F Distribution Board, SPN 12 Way, 240V, Double door with IP 54 protectioncomplete all as specified and as directed. (Make: Legrand cat part No. 5076 42 or equivalent make as per List of Manufacturer"s)
168M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar),including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed,including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessarytesting on completion complete all as specified and as directed by the Engineer-in-Charge.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail