Orissa Power Transmission Corporation Limited-OPTCL has published Renovation Of Control Room Building Inside 220/132 Kv Grid S/S At Bhanjanagar ( Providing Leak Proofing,Repair And Painting,False Ceiling And Paving ) . Submission Date for this Tender is 13-12-2021. Road Work Tenders in Bhanjanagar Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supplying all labour for removal of cement plaster including racking out joints 12 mm deep and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 2 | Supplying all labour for dismantling doors and windows including stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 3 | Supplying all labour for dismantling 2.5 cm thick grading concrete including stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 4 | 20 mm thick cement plaster with cement and sand mortar (1:4 ) finished smooth to roof ceiling etc with wateringand curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 5 | 16 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls c with wateringand curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 6 | Finishing wall surface with cement based wall putty of approved quality and make and finished smooth etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of alllabour with T&P required etc complete in all respects as per the direction of Eng.-in-charge. |
| 7 | Painting two coats with synthetic enamel paints to doors and windows with a paint of approved shade over a coat of primer including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & Prequiredetc complete in all respect as per the direction of the Eng.-in-charge |
| 8 | Priming one coat with af approved quality of primer of Berger make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & Prequiredetc complete in all respect as per the direction of the Eng.-in-charge |
| 9 | Wall paintingtwo coats with a plastic emulsion paint of approved shade over wall surface finished smooth to give an even shade including watering,curing etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of alllabour with T&P required etc complete in all respects as per the direction of Eng.-in-charge. |
| 10 | Providing fitting fixing of interlocking cement concrete pavement blocks(60mm thick block ),including cost conveyance taxes of all materials & cost of all labours t&p required for the work etc |
| 11 | Providing fitting fixing of interlocking cement concrete pavement blocks in kerb using 25mm thick C M bed (1:1),including cost conveyance taxes of all materials & cost of all labours t&p required for the work etc complete |
| 12 | Earthwork in excavation in hard soil onfoundation trenches in all kinds of soil including moorum stony earth and earth mixed with boulder except sheet rocks and boulders requiring blasting including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoringand shuttering , dewatering if required etc complete including cost,conveyance,taxes of all labour with T&P required etc complete as per the direction of the Engineer in charge. |
| 13 | Supplying all labour with T&P for filling foundation and plinth with sand including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge. |
| 14 | Cement concrete with (1:3:6) in foundation and floors using 40 mm ( 1 ½ ‘’) size blackhard crusher broken granite stone metal of approved quality from approved quarry including lowerlaying concretewatering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 15 | Cement concrete with (1:1.5:3) in foundation and floors using 12 mmsize blackhard crusher broken granite stone chips of approved quality from approved quarry including lowerlaying concretewatering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 16 | Providing,fitting and fixing up partition walling OEL aluminium anodised section no. 9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12mm thick prelaminated board (Novapan make) and jointing angle No. 1855 etc. etccomplete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 17 | Providing,fitting and fixing of powder coated alluminium door with OEL anodized Al. door sectionof 9202 as vertical member ,9201 as top member and 9200 as bottom & middle member and 12mm thick prelaminated board / 6mm thgick black glassfixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 etccomplete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 18 | Supplying,fitting and fixing of powder coated window (sliding type) made of alluminium section 9778 as windows frame , section no. 4095 ,4096 and 9777 ,3994 as shutter frame with 6 mm thick black glass as panel fitted withrubber bidding including all fitting & locking arrangement complete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 19 | Supplying fitting & fixing of false ceiling with alluminium anodized T-section No. 3215with 2" center to center L-section No. 1705up to 15 micron on 4 walls to be fixed by means of steel screw & PVC plugs and the alluminium grid 2" x 2" sustainded from ceiling andprelam board / PVC V Board etc completeincluding cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 20 | Supplying afitting fixing of 36 watt2"x 2" LED lights suitable for false ceing as per approveddesignthickness including cost, conveyance, taxes and royalities of all materials , cost, conveyance and taxes of all labour with T&P required for the work etc. complete as per the direction of the E.I.C. |
| 21 | 4 cm thick grading concrete(1:2:4) using 12 mm and down blackhard crusher broken granite stone chips of approved quality from approved quarry including lowerlaying concretewith chicken mesh andSIKA liquid and two coats of sikka latex primer watering and curing etc complete to required levelincluding cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. ( with SIKA liquid and two coats of sikka latex primer ) |
| 22 | Supplying fitting fixing of hydraulic two speeds door closer of approved quality and dimensionetc complete including cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 23 | Supplying all labour for dismantling brick masonry including stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 24 | Providing, supplying, fitting and fixing of M.S. door,window, grill gate,ladder made out of M.S. flat and M.S. angle , M.S. square bar conforming to IS 1977/ 1975 of approved design and drawing (design and drawing to besupplied from the Engineer in charge) including drilling holes in framesetc supplying required size of M.S. screws and cutting grooves or beads where necessary including cost, conveyance, and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per direction of the Engineer in charge. |
| 25 | Providing fitting, laying and fixing of approved quality Ceramic glazed walltileof approved make and shade of premium grade having thickness 6.5 mm to 6.7 mm conforming to IS 13753 for sizes 30cm x 20cm / 20cm x 20cm of special plane / printed series of approved quality & make laid on vertical faces of walls,dados skirting and risers of steps using 12mm thick cement and sand mortar in (1:3) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing,watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge. |
| 26 | Providing fitting, laying and fixing of approved quality Ceramic glazed floor tileof approved make and shade of premium grade having thickness 6.5 mm to 6.7 mm conforming to IS 13753 for sizes 30cm x 20cm / 20cm x 20cm of special plane / printed series of approved quality & make laid on floors using 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge. |
| 27 | Providing for supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make andof approved quality and shade with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost conveyance taxes of all materials and cost conveyance of all labour with T&P etc. complete in all floors in all respects as per direction of Engineer-in-Charge. |
| 28 | Supplying fitting fixing of precoloured Galvanised steel sheet of approved quality and dimension including hoisting,placing in position,fitting and fixing nuts and bolts etc complete including cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 29 | Supplying all labour & T&P required for cleaning of M.H Chamber as per P.H specification , labours for intial cleaning , dewatering and removing the night soil and debries etc. complete in all respects as per the direction of the E.I.C. |
| 30 | Painting two coats with weather shield coat on wall surface with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & Prequiredetc complete in all respect as per the direction of the Eng.-in-charge |
| 31 | PH AND SANITARY WORKS |
| 32 | Supplying all labour with T&P required for fitting and fixing of followingPH items with brands ORIPLAST ( Sch 80) for pvc pipes, NYCER,PARRYWARE for porcelin items, PLAZA or jaguar for CP fittings, TATA for MS/GI items with all required fittings as per P.H. specificationincluding cost, conveyance, taxes of all material & cost,conveyance,taxes of all labour with T&P required etc complete in all respect as per direction of EIC. |
| 33 | 25mm dia PVC Pipes (sch 80 oriplast) |
| 34 | 20mm dia PVC pipe conceald wiring (sch 80 oriplast) |
| 35 | 40mm dia PVC pipe |
| 36 | 4" dia PVC Pipe |
| 37 | LL cistern ( slimline ) |
| 38 | Wash Hand Basin ( parryware ) |
| 39 | Commode ( Parrywere ) |
| 40 | Commode cover ( Parrywere ) |
| 41 | Angle stopcock |
| 42 | Shower with arm |
| 43 | Concealed stopcock |
| 44 | CP Bib cock long body |
| 45 | CP Pillar Cock |
| 46 | CP Towel Rail |
| 47 | CP Soap holder |
| 48 | Mirror |
| 49 | CP Gratings |
| 50 | Health faucet |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
