}

Upgradation Of 33Kv Substation Thambalamanna To 110Kv Level-Providing Partition Works To Old Control Room For Communication Room And Office Aluminium Works For Doors Windows Partitions Polyester Powder Coated Aluminium Shutter Particle Board Providing Gla, 110kV Substation Thambalamanna-Kerala

Kerala State Electricity Board-KSEB has published Upgradation Of 33Kv Substation Thambalamanna To 110Kv Level-Providing Partition Works To Old Control Room For Communication Room And Office Aluminium Works For Doors Windows Partitions Polyester Powder Coated Aluminium Shutter Particle Board Providing Gla. Submission Date for this Tender is 16-12-2021. Substation Tenders in 110kV Substation Thambalamanna Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

30071805
Corrigendum : Upgradation Of 33Kv Substation Thambalamanna To 110Kv Level-Providing Partition Works To Old Control Room For Communication Room And Office Aluminium Works For Doors Windows Partitions Polyester Powder Coated Aluminium Shutter Particle Board Providing Gla
Open Tender
Indian
Kerala
110kV Substation Thambalamanna
16-12-2021

Tender Details

Upgradation Of 33Kv Substation Thambalamanna To 110Kv Level-Providing Partition Works To Old Control Room For Communication Room And Office Aluminium Works For Doors Windows Partitions Polyester Powder Coated Aluminium Shutter Particle Board Providing Glazing Solid Block Masonry Plastering Painting Rcc Steel Reinforcement Centering Shuttering Ceramic Tile Work Demolishing Brick Laterate

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 09-Dec-2021 Time Extension Notice Date 16-12-2021

Key Value

Document Fees
INR 1298 /-
EMD
INR 8300.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Upgradation of 33kV Substation Thambalamanna to 110kV level- Providing partition works to old control room for communication room and office
Sl. No. Item Description
1Providing and fixing aluminium work for doors,windows,ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and shape,including necessary filling up the gaps at junctions,ie at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth,rust free,straight,mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading, glazing / paneling, C.P.brass / stainless steel screws,all complete as per architectural drawings and the directions of Engineer-in-charge(Glazing,paneling and dash fasteners to be paid seperately)
2For shutters of doors ,windows,ventilators including providing and fixing hinges/pivots and making provision fixing of hinges wherever required including the cost of EPDM rubber/neoprene gasket required (filling shall be paid for seperately)-Polyester Powder coated Aluminum (minimun thickness of polyester powder coating 50 micron)
3Providing and fixing 12mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade I Type II,in panelling fixed in aluminium doors,windows,shutters and partition frames with C.P. brass/stainless steel screws etc.complete as per architectural drawings and directions of Engineer-in-charge.-- Pre-laminated particle board with decorative lamination on both sides.
4Providing and fixing glazing in aluminium door,window,ventilator shutters and partitons etc.with EPDM rubber/neoprene gasketcomplete as per architectural drawings and directions of Engineer-in-charge--with float glass panes of 5.5mm thickness.
5Demolishing brick/Laterate work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar
6Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth(up to 1.5m above plinth) with thickness 15cm in: CM 1:6 (1 cement : 6 coarse sand) etc complete
7Plastering using 12mm cement plaster of mix 1:4 (1 cement:4 fine sand) including all cost of materials, labour charges etc.complete For walls
8Finishing walls with Deluxe multi surface paint system for interiors and exteriors using primer as per manufactures specifications -Two or more coat applied on walls @1.25 Ltr/10m2 over and including one coat ofspecial primer applied@0.75 Ltr/10m2)
9Centering and shuttering including strutting,propping etc. and removal of form for foundations ,footings, base of column etc. for mass concrete.
10Providing and laying in position specified grade of Reinforced Cement concrete ,excluding the cost of centering,shuttering,finishing and reinforcement-All work upto plinth level. 1:1.5:3(1cement:1.5coarse sand:3graded stone aggregate 20mm nominal size)
11Steel reinforcement for RCC work including strightening,cutting, bending,placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe500D or more.
12Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
13Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below
14Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
15Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail