Military Engineer Services-MES has published Repairs To Joinery, Plumbing, Sanitary Fittings, Roof Covering, Roof Treatment, False Ceiling, And Connected Works In Military Hospital, Rms, Ge Office Under Ge Belgaum Repairs To Joinery, Plumbing, Sanitary Fittings, Roof Covering, . Submission Date for this Tender is 18-12-2021. Civil Work Tenders in Belgaum Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Nov-2021 | Revised BOQ | BOQ | 11-12-2021 |
| 2 | 11-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-12-2021 |
| Sl. No. | Item Description |
| 1 | Dismantling of corrugated or semicorrugated Asbestos Cement sheets in roof coverings including ridges, valley gutters, etc. and taken as credit all as specififed and as directed. |
| 2 | Dismantling of single layer Mangalore pattern or similar tiles in roofing bedded in lime or cement mortar taken as credit all as specified and directed. |
| 3 | Dismantling battens for tiles, etc. of any size spaced exceeding 15 cm including tilting fillets taken as creditall as specified and directed. |
| 4 | M&L for Mangalore pattern or similar tiles in roofing, interlocking at side joints, laid dry, including dismantling of existing unserviceable tiles of any description and size and making good disturbed roof members all as specified and as directed. |
| 5 | Fixing only Mangalore pattern or similar tiles in roofing, interlocking at side joints, laid dry, serviable roof tiles obtained from dismantling complete all as specified and as directed. |
| 6 | M&L for ridge/ hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in CM 1:6 all as specified and directed. |
| 7 | M&L for 2nd class hard wood board, 20mm thick, planned on one side and the other clean sawn, with butt joints and fixed with nails in any situation including dismantling unserviceable boarding of any description and making good disturbed members all as specified and directed. |
| 8 | M&L for 2nd class hard wood in scantling, clean sawn fixed in unframed work including dismantling of existing unserviceable timber scantling 40 Sq.cm and over in section and in any position in un-framed work and making good disturbed members all as specified and directed. |
| 9 | M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or beads; sectional area exc 6 andn.exc. 13 Sq.cm including dismantling of existing unserviceable fillets, rails, posts, rafters, purlins, etc. and making good disturbed members all as specified and directed. |
| 10 | M&L for pre-painted galvalume coated high tensile corrugated/ trapezoidal profile steel sheets, AZ-70 coating mass, 550 Mpa yield strength, 0.5mm thick (TCT), as in roofing/ cladding fixed with self drilling fasteners as per manufacturers instructions all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc. |
| 11 | S&F plain galvanised mild steel sheeting with grade of zinc coating 275, 0.5mm thick, in ridges, hips, valley gutter, drip and straight flashingsall as specified and directed. |
| 12 | M&L for 6mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls, etc. fixed with L-type or J-type or cranked hook bolts including dismantling of existing unserviceable AC roofing sheets of any description and size and making good disturbed roof members all as specified and directed. |
| 13 | M&L for 6 mm thick asbestos cement two piece adjustable serrated ridge for corrugatedsheets in roofs fixed with ‘L’ type or ‘J’ type or cranked hook bolts including dismantling of existing unserviceable AC ridge sheets of any description and size and making good disturbed ridge/ roof members all as specified and directed |
| 14 | S&F 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grids of 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works including making good disturbed wall/ ceiling surfaces all as specified and directed. |
| 15 | Taking down chowkhat with shutters (without taking off shutters from the frame) area not exc 1.5 Sqm each all as specified and directed. |
| 16 | Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each all as specified and directed. |
| 17 | Taking down shutters of any description n exc 1sqm eachall as specified and directed. |
| 18 | Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each all as specified and directed. |
| 19 | M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing all as specified and as directed. |
| 20 | M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing all as specified and directed |
| 21 | M&L for aluminium frame work as in doors, partitions and windows using powder coated aluminium sections including provision of glazing clips, hinges, handles, etc all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer"s catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately. |
| 22 | M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination on the other side with white lamination, as in cub board shelves/ cabinet works fixed with screws, fixed in repairs, all as specified and directed |
| 23 | M&L for 18mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination on the other side with white lamination, as in cub board shelves/ cabinet works fixed with screws, fixed in repairs, all as specified and directed |
| 24 | M&L for 5.5mm thick sheet glass ordinary quality in square n exc 0.5 sqm in each pane fixed to aluminium shutters all as specified and directed. |
| 25 | S& F in repairs floor door stopper of brass body and tongue, anodised, with 140mm long cover plate and hard drawn steel spring, fixed in floor all as specified and directed. |
| 26 | M&L for factory made 35 mm thick second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick plywood BWR 5 plywith commercial veneers on both faces, sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkats all as specified and as directed. |
| 27 | M&L for factory made 30mm thick 2nd class hard wood glazed/ gauged window/ ventilator shutters, open rebated and prepared to receive glass, gauze, etc. (without Sash bar)edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b) and fitted to chowkats all as specified and as directed. |
| 28 | M&L for factory made 30mm thick 2nd class hard wood glazed/ gauged window/ ventilator shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b) and fitted to chowkats all as specified and as directed. |
| 29 | S&F factory made 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, fitted to chowkats all as specified and as directed. |
| 30 | S&F 300mm long aluminium anodised sliding door boltwith hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate typewith bright bolt not less than 12mm dia all as specified and directed. |
| 31 | S&F in repairs 300mm long aluminium anodised sliding door boltwith hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate typewith bright bolt not less than 12mm dia all as specified and directed. |
| 32 | S&F MS butt hinges 100mm in size, medium weight, cold rolled all as specified and directed. |
| 33 | S&Fstainless steel butt hinges 100mm in size,all as specified and directed. |
| 34 | S&F MS butt hinges 75mm in size, medium weight, cold rolled all as specified and directed. |
| 35 | S&F aluminium anodised barrel tower bolt 150mm size all as specified and directed. |
| 36 | S&F aluminium anodised barrel tower bolt 100mm size all as specified and directed. |
| 37 | S&F in repairs aluminium handle, "D" type, anodised 125 mm in size all as specified and directed. |
| 38 | S&F aluminium handle, "D" type, anodised 150 mm in size all as specified and directed. |
| 39 | S&F in repairs 100mm long aluminium anodised hasp and staple, safety type with hinge pin including bolt to hinge plate fixed with screws complete all as specified and as directed. |
| 40 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm fixed in panel of joinery with stainless steel wire staples all as specified and directed. |
| 41 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm fixed in panel of joinery with stainless steel wire staples all as specified and directed. |
| 42 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass of any description and size and making good disturbed surfaces all as specified and directed. |
| 43 | Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc., all as specified and directed. |
| 44 | M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or block masonry or concrete surfaces finished even and smooth withoutusing extra cement complete all as directed. |
| 45 | M&L for rendering 5mm thick in cement mortar 1:3 on soffit of roof ceiling, finished fair and even withoutusing extra cement complete all as directed.all as specified and directed. |
| 46 | M&L for rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth withoutusing extra cement complete all as directed. Note: Water proofing compound shall be measured and paid separately. |
| 47 | Supply only integral water proofing compound all as specified and as directed. |
| 48 | M&L for providing roof treatment with APP modified water proofing membrane with the following specifications all as specified and directed. |
| 49 | Removing existing roof/ chajjas treatment of any type like plastic felt/ HP tiles of any description including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris to a distance exc 50m but n exc 100m |
| 50 | Brushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surfaces and rendering 10 mm thick in CM 1:3 mixed with water proofing compound and finishing surfaces even and smooth without using extra cement. Note: Water proofing compound shall be measured and paid separately |
| 51 | Preparation of plastered surfaces by removing dust, dirt & applying oil bound bituminous primer at 0.2kg per Sqm & providing APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including min 10cm side/over lap & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm. |
| 52 | M&L for plain cement concrete1:3:6type C1 using 20mm graded stone aggregate as in surface channels, drains, etc. including necessary form work/ moulds including demolition of existing unserviceable PCC drains of any description and making good the disturbed surfaces all as specified and directed. |
| 53 | M&L plain cement concrete 1:2:4,type B0, using 12.5mm graded stone aggregate as in roof kerbs, mud stops, coving, etc. with rounded or chamfered edges including demolition of existing plain cement concrete of any description and size and making good disturbed surfaces all as specified and directed |
| 54 | M&L for premium quality coloured glazed ceramic tiles 300mm x 450mm x 7mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar bedding (but not backing) and removing rubbish off the premises all as specified and directed. |
| 55 | M&L for premium qualitycoloured non skid ceramic tiles, edge cut, 7 to 8mm thick area of each tile exc 0.06 Sqm but not exc 0.11 Sqm,in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bedin cement mortar 1:4 all as specified and directed. |
| 56 | M&L for premium quality light coloured vitrified ceramic tiles, matt finished, 10mm thick, area of each tile not exc 0.36 Sqm as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bedin cement mortar 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar bedding (but not backing) and removing rubbish off the premises all as specified and directed. |
| 57 | M&L for machine cut Kota stone slab, 20-25mm thick, as in flooring, laid and jointed with neat slurry and pointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing complete including 15mm thick screed bedin cement mortar 1:6 including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises all as specified and directed. |
| 58 | M&L for machine cut Kota stone slab, 20-25mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing completeincluding 10mm thick backing coat in CM 1:4 including taking down existing cement plaster and raking out joints, hacking for key, scrubbing down with water, removing rubbish off the premises etc. complete all as specified and directed. |
| 59 | M&L for machine cut cudappah stone slab, 20-25mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing completeincluding 20mm thick backing coat in CM 1:4 including taking down existing cement plaster and raking out joints, hacking for key, scrubbing down with water, removing rubbish off the premises etc. complete all as specified and directed. |
| 60 | Demolition of plain cement concrete in ground floors and pavings n. exc. 15cm thick, below or above GL all as specified and directed. |
| 61 | M&L for 100mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in paving/ hard standing/ floor and finishing the concrete surface even and smooth without using extra cement and making impressions of expanded metal while the concrte is green all as specified and directed. |
| 62 | M&L for 25mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in paving/ hard standing/ floor and finishing the concrete surface even and smooth without using extra cement and making impressions of expanded metal while the concrte is green all as specified and directed. |
| 63 | M&L for 60mm thick machine pressed precast concrete interlocking coloured paver blocks, M-35 grade, any shape and size with anti skid finish on top confirming to IS 15658-2006, including 75mm thick sand filling, watering, consolidation all as specified and directed. |
| 64 | M&L for 75mm thick plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base finishing the concrete surface even and smooth without using extra cement all as specified and directed. |
| 65 | M&L forchequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement andpigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bedin cement mortar 1:6 as inpathways, etc. complete all as specified and directed. |
| 66 | M&L for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection, path etc finishing the concrete surface even and smooth without using extra cement all as specified and directed. |
| 67 | M&L for Granite stone tiles(any type), 20mm thick, premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab over 10mm thick screed bed in cement mortar 1:4 including rubbing and polishing includingcomplete all as specified and as directed. |
| 68 | M&L for machine cut Granite stone tiles, 20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing completeincluding 20mm thick backing coat in CM 1:4 including complete all as specified and directed. |
| 69 | M&L for pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 including demolition of existing unserviceable brick/ PCC block masonry built in cement mortar in any position below or above ground level and making good disturbed surfaces all as specified and directed. |
| 70 | M&L for two coats of oil bound distemper (Acrylic distemper washable), any colour, over a coat of primer on newly plastered walls, pilasters, cornices, etc., including necessary preparation of surfaces with chalk whiting all as specified and as directed. |
| 71 | M&L for two coats of cement based paint, any colour, on newly plastered surfaces of walls, pilasters, cornices, etc., over a coat of primer including necessary preparation ofsurfaces all as specified and directed. |
| 72 | M&L for three coats of white wash on newly plastered surfaces of ceilings including necessary preparation of surfaces all as specified and as directed. |
| 73 | Supply and lay CPVC Pipes of outer dia 16 mm SDR 11 and plain CPVC SDR 11 fittings on wall /ceiling or laying floors including taking up and down old damaged pipe complete all as specified and directed. Note : Make of CPVC pipe and fittings : Ashirwad /Astral |
| 74 | Supply and lay CPVC Pipes of outer dia 20 mm SDR 11 and plain CPVC SDR 11 fittings on wall /ceiling or laying floors including taking up and down old damaged pipe complete all as specified and directed. Note : Make of CPVC pipe and fittings : Ashirwad /Astral |
| 75 | Supply and lay CPVC Pipes of outer dia 25 mm SDR 11 and plain CPVC SDR 11 fittings on wall /ceiling or laying floors including taking up and down old damaged pipe complete all as specified and directed. Note : Make of CPVC pipe and fittings : Ashirwad /Astral |
| 76 | S&F in repairs 1mm thick stainless steel sink, overall size not less than 495x420mm, bowl size not less than 410x330x160mm, with plug, washers and wastes including bedding in cement mortar, fixing cantilever brackets and connecting union to pipe all as specified and as directed. |
| 77 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm, excluding taps, waste chain and plug and porcelain stopper but including brackets etc complete all as specified and directed. |
| 78 | S&F in repairs mirror of selected quality glass, with bevelled edges, 600mm x 450mm size, mounted on 6mm thick commercial plywood with aluminium beading and fixed to wall with wooden plugs, chromium plated brass screws and cup washers all as specified and as directed. |
| 79 | S&F in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plateall as specified and as directed. Make: MARVEL/Classic/Adarsh |
| 80 | S&F in repairs 20mm dia brass chromium plated towel rail, "D" type, 600mm long between flanges all as specified and as directed. |
| 81 | M&L for 40mm bore Ligh Density Polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 etc.fixed complete to walls, ceilings or laid in floors, fixed in repairs, all as specified and as directed. Make:Finolex/Supreme |
| 82 | S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm, white, with integral foot rest (excluding flushing cistern) including "P" or "S" trap including lime concrete bedding etc. complete all as specified and directed. |
| 83 | S&F in repairs 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing unserviceable pipes of any description and size and making good disurbed surfaces all as specified and directed. |
| 84 | S&F 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed. |
| 85 | S&F in repairs 75mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing unserviceable pipes of any description and size and making good disurbed surfaces all as specified and directed. |
| 86 | S&F in repairs 110mm bore UPVC (SWR) bends any radius with access door all as specified and directed. |
| 87 | S&F in repairs 110mm bore UPVC (SWR) branch piece, single (single Y) equal or unequal with access door all as specified and directed. |
| 88 | S&Fin repairs110mm bore UPVC (SWR) branch piece, double (double Y) equal or unequal with access door all as specified and directed. |
| 89 | S&F in repairs 75mm bore UPVC (SWR) bends any radius with access door all as specified and directed. |
| 90 | S&F in repairs 75mm bore UPVC (SWR) branch piece, single (single Y) equal or unequal with access door all as specified and directed. |
| 91 | S&F 100mm vent cowl all as specified and directed. |
| 92 | S&F in repairs UPVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet all as specified and directed. |
| 93 | M&L for 50mm bore Ligh Density Polyethylene pipes (LDPE) of pressure rating 4 kgf/cm2 etc.fixed complete to walls, ceilings or laid in floors, fixed in repairs, all as specified and as directed. |
| 94 | S&F in repairs UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed. |
| 95 | S&F in repairs 100mm size mortise lock, brass, vertical type, four levers, including cutting holes in existing pressed steel frames, all as specified and directed. Make: Godrej /Harrison |
| 96 | S & F in repairs 15 mm bore Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed. |
| 97 | S&F in repairs 15mmbore bib taps, cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. |
| 98 | S&F in repairs 15mm bore PTMT bib taps, standard type,(Minimum weight 90gms) any colour, high pressure screwed for iron pipe all as specified and as directed. |
| 99 | S&F in repairs pillar taps brass chromium platedwith capstan heads, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed down high pressure screwed for 15mm bore GI pipe all as specified and directed. |
| 100 | S&F in repairs PVC connection 15mm size with PTMT nuts, 600mm long all as specified and directed. |
| 101 | S&F in repairssyphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe etc complete all as specified and directed. |
| 102 | S&F in repairs 15mm bore stop valves, brass CP screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed. |
| 103 | S&F in repairs 15mm bore stop valves, fancy type brass CP, with long shank and cup (concealed type), screwed down high pressure, screwed both ends for iron pipe for unions all as specified and as directed. |
| 104 | S&F in repairs shower rose swivel type brass CP shower rose 125mm size suitable for fixing with 15mm bore pipe all as specified and as directed. |
| 105 | S&F PVC (SWR) eaves gutter half rounded 150mm bore including pipe accessories PVC holder bats bolts nuts etc. including taking down existing unserviceable gutters of any description and size and making good disurbed surfaces all as specified and directed. |
| 106 | Dismantling wrought iron or mild steel work of any description and in any position not otherwise provided for all as specified and directed. |
| 107 | M&L for mild steel small articles like bands, straps, including bolts, if required; hooks (stay), hook and pintle hinges; largehasps and staples; hand made sliding bolts; clamps; hold fasts; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar articles conforming to Fe-290 Gde-E-165 all as specified and as directed. |
| 108 | S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 all as specified and as directed. |
| 109 | S&F mild steel works in tubular trusses, rafters, purlins, etc. including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 all as specified and as directed. |
| 110 | M&L for mild steel flats as in wind ties for roof including securing bolts and necessary drilling, conforming to Fe-410Gde E-165 including dismantling the existing unserviceable mild steel members of any description and size and making good disturbed members all as specified and as directed. |
| 111 | S&F in repairs Door closer, of aluminium (die cast) body, hydraulically regulated, designation No 3, universal type, suitable for door shutters of weight between 61 to 80kg, all as specified and directed. Make:Everite/Hardwin |
| 112 | S&F in repairs Door closer, of aluminium (die cast) body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60kg, all as specified and directed |
| 113 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, all as specified and directed |
| 114 | S&F in repairs PVC flexible pipe (waste pipe), 900mm long, suitable for 32 mm bore waste coupling of sink/ wash hand basin all as specified and directed. |
| 115 | S&F in repairs PVC flexible pipe (waste pipe), suitable for urinals all as specified and directed. |
| 116 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including "P" or "S" trap, fixing bolts, etc, connecting to drain pipe and flushing pipe all as specified and as directed. |
| 117 | S&F in repairs, Vitreous China urinal,bowltype, flat back/ corner wall, 465 x 355 x 265mm size(minimum), white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including provision of grating and union for discharge pipe,15mm bore PTMT urinal spreader, waste pipe, (excluding flushing cistern, flush pipe) all as specified and as directed. |
| 118 | S&F in repairs plastic water closet seat for EWC, closed pattern with flat bottom and cover, any colour as approved by GE and mild steel chromium plated or aluminium hinging device all as specified and as directed. |
| 119 | S&F in repairs PTMT waste couplings, half or full threaded, minimum weight 45 gms suitable for 32mm bore discharge pipes all as specified and directed. |
| 120 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 121 | M&L for preparation of new steel surfacesover 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 122 | S&F in repairs 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed. Make: Continental series of JAQUAR or equivalent model in JOHNSON/ CERA |
| 123 | S&F in repairs health faucet, brass chromium plated with 1m long flexible PVC tube and wall hook all as specified and as directed. Make: Cat No 563 of JAQUAR or equivalent model in JOHNSON/ CERA |
| 124 | S&F in repairs 25mm dia mild steel powder coated curtain rods, fancy type, all as specified and as directed. Make: MARVEL or equivalent |
| 125 | M&L for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, "ISI" marked, cylindrical, vertical with closed top conformingto IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted and fixed in position including testing complete all as specified and directed. |
| 126 | S&F in repairs 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 127 | S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc including dismantling of corrugated or semicorrugated sheets in roof coveringsall as specified and directed. |
| 128 | M&L in repairs Mirror cabinet of selected quality of size 350mm x 450mm all as specified and directed.Make: Cat No. 555 of PRAYAG |
| 129 | S&F in repairs mirror of selected quality glass, with bevelled edges, 600mm x 450mm size, mounted on 6mm thick commercial plywood with aluminium beading and fixed to wall with wooden plugs, chromium plated brass screws and cup washers all as specified and as directed. |
| 130 | S&F in repairs 20mm dia brass chromium plated towel rail,600mm longbetween flanges and including chromium plated brass screws & wooden/ plastic cleats (min wt 170 gms) all as specified and as directed. |
| 131 | M&L for 4mm thick Aluminium Composite Panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick aluminium alloy PERALUMAN-100 (AlMg1-NS41), weight not less than 7.6 kg per sqm, complete with all necessary sub-structures, anchors, hardware and fittings to provide a total installation, fixed to existing wooden/ steel members including dismantling of existing unserviceable panel all as per manufacturers instructions, fixed in repairs, all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc. Make: Armstrong/Alstrong/ Aludecor/ Alucobond |
| 132 | M&L for stainless steel hand rails made out of 16 SWG, 60 mm to 20mm dia stainless steel pipes of grade 304, confirming to internationally accepted design and shapes, includng cutting to size and bending to shape as required at site, welded, mirror polished and grouting in to wall/floor with necessory mounting plate or ancor bolt incl dismantling of existing handrails of any description and type al as specified and as directed. |
| 133 | S &F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified and directed |
| 134 | S &F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawingall as specified and directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
