}

Construction Of Pre Engineering Building 4 Storied G3 Male Barrack With W.C. Bath Including Civil, Sanitary And Water Supply Works, Site Preparation Etc. For Detainees Of Detention Centre At Matia In Goalpara District. ( Balance Work ) Construction O, Matia in Goalpara District-Assam

Assam Police Housing Corporation Ltd has published Construction Of Pre Engineering Building 4 Storied G3 Male Barrack With W.C. Bath Including Civil, Sanitary And Water Supply Works, Site Preparation Etc. For Detainees Of Detention Centre At Matia In Goalpara District. ( Balance Work ) Construction O. Submission Date for this Tender is 23-11-2021. Building Work Tenders in Matia in Goalpara District Assam. Bidders can get complete Tender details and download the document.




Tender Notice

29909084
Construction Of Pre Engineering Building 4 Storied G3 Male Barrack With W.C. Bath Including Civil, Sanitary And Water Supply Works, Site Preparation Etc. For Detainees Of Detention Centre At Matia In Goalpara District. ( Balance Work ) Construction O
Open Tender
Indian
Assam
Matia in Goalpara District
23-11-2021

Tender Details

Construction Of Pre Engineering Building 4 Storied G3 Male Barrack With W.C. Bath Including Civil, Sanitary And Water Supply Works, Site Preparation Etc. For Detainees Of Detention Centre At Matia In Goalpara District. ( Balance Work ) Construction Of Pre Engineering Building 4 Storied G3 Male Barrack With W.C. Bath Including Civil, Sanitary And Water Supply Works, Site Preparation Etc. For Detainees Of Detention Centre At Matia In Goalpara District. ( Balance Work )

Key Value

Document Fees
INR 5000 /-
EMD
INR 305972.0 /-
Tender Value
INR 1.52 Crore /-

BOQ Items

Name of Work: Construction of Pre-Engineering Building 4-Storied (G+3) Male Barrack with W.C. Bath (200 persons capacity) including Civil, sanitary & Water Supply works, Site preparation etc. for Detainees of Detention Centre at Matia in Goalpara District.
Sl. No. Item Description
1CIVIL WORKS: Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (b) In hard/ dense soil
2Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps,walls,bricks works, etc. as directed and specified including dewatering if necessary and curing complete. In prop 1cement : 4sand : 8coarse aggregate by volume
3Plain cement concrete apron in prop 1:4:8 with 20mm down graded coarse agg. Over soling including neat cement finish using cement slurry 2.75Kg. of cement per sq.m. of floor (soling to be measured separately). (b) 50 mm thick
425 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finishto be laid in panelsincluding curing complete as directed.
5Providing and laying plain/reinforcement cement concrete works cement,coarse sand,& 20mm down graded stone aggregate including dewatering if necessary,and curing complted but exceding cost of form work and reinforcement for reinforcement cement concrete work. (form work and reinforcement will be measured and paid separately)(A) In substructure up to plinth level without using admixture, M20 grade concrete
6(B)In super structure from plinth level up to Roof level. (b) M20 grade concrete
7Providing form work of ordinary timber planking so as to give a rough finish including centering,shuttering,shuttering and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced and plain cement concrete work in. Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(a) Using 38mm thick plank
8Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (a) Using 38mm thick plank upto Roof
9Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling.
10Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:5
11Superlight Weight Autoclaved Aerated concrete block work using Grade-I AAC block of compressive strength 40kg/cm2 having dry density 550 to 650 kg/cum conforming to IS-2185 pt-3 or pt-4 in cement mortar of prop 1:4 including racking out jointsand curing complete as specified & directed. (ii)In superstructure above plinth level up to1st floor level
12Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal rangeii) Of size 200mmx300mm and above
13Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (A) CERAMIC ii)Executive range-1 (Sizes 400 mm x 400mm and above) (a) Somany made- VC Shield (Group- 25) (406x406) mm Deluxe -VC
1415 mm thick Cement plaster in single coat on single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.A) On rough side b) In cement mortar 1:4
1515 mm thick Cement plaster in single coat on single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.B) On fair side b) In cement mortar 1:4
16Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre CementBoard as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. Finally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid. (A) Standard Ceilings of Everest make or equivalent as directed by the departement (i) Using 4 mm thick FC Board
17Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (a) 1.25mm thick sheet (ii) Size 105mm x 60mm (Single rebate)
18Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.) (a) 30 mm thick
19a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.
20b) Finishing wall with water proofing cement paint of approvedbrand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.
21Wall painting (two coats) with acrylic emulsion paint approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)
22Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.
23Supplying fitting & fixing in position reinforcement bars confirming to relevant I.S.Code for RCC work/R.B Walling including straghtining,cleaning,cutting and bending to proper shape and length as per details supplying and binding with 20G annealed black wire and placing in position with proper block,supports,chairs,spacers etc complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars upto Roof.
24Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD
25Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) c)ISI approved Mild steel reinforcement bar(M.S.Bar)
26Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing.
27Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. a) Openable
28Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.
29Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.
30Plain cement concrete floor base in prop1:3:6 laid in alternatebays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. b) 50mm thick
3165 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.
32Providing and fixing clear sheet glass beded inputty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) (2). Area of glass panesexceeding 0.15m2 but not exceeding 0.52m2.(b). 4.00mm thick.
33Providing, fitting and fixingM.S.grillof required pattern for windows/ clerestory windows/ openingwith M.S. flatsat required spacingin frame all round,squre or round M.S.bars with round headed bolts and nuts or screws. I .Plain grill (b) Fixed to steel frames
34Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )a) Sliding door bolts i) 300mm x 16mm
35b) Tower bolts iii) 200mm x 12mm
36c)Door handles ii) 100mm
37Applying priming coat over newwood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughlycleaningoil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white).
38Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping (i).Surfaces over 100mm in width or girth. b). High gloss(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
39Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).
40SANITARY & WATER SUPPLY WORKS : Providing fitting and fixingVitreous china wall hang water closet (European type W.C pan 400mm high)with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately).c) Parryware make i)white (v) Elite S Trap (Cat. No. C0297) (inclusive of seat cover)
41Supplying, fiting and fixing PVC flushing cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make a) White viii) Tiger (CAt No.C8260)
42Providing vitreous China wall hang wash basin with CP brass waste coupling of standard pattern, C.P. brass chain with plug, PVC waste pipe including painting of fittings and brackets , cutting and making good the walls and slabs wherever required. (Pillar cock,stop cock, waste coupling are to be paid separately) (B) Hindware Make (a) White (ii) Cute (Cat No. 10053)
43Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.
44Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1331N)
45Providing, fitting and fixingCP towel ring of Jaquar make complete as specified and directed (b) Sona make(i) Towel ring round (Cat.No.TR-06051)
46Providing, fitting and fixing CP toilet paper holder of Jaquar make complete as specified and directed (d) Sona make(i) Super (Cat. No.AL-1001)
47Providing, fitting and fixing CP Waste Coupling ( half thread HT and Full Thread FT) complete as directed and specified. (b) Sona (i)Rupa 32mm (HT/ FT) (Cat.No.WS-0801)
48Providing, fitting and fixing CP bottle trap J type with outlet pipe and wall flange of following size (b) Sona make for basin etc. complete as directed and specified ii) Bottle trap Indian 40 mm (Cat. No. BT- 0752)
49Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)iii) 25mm(OD) diameter
50Supplying, fitting and fixing C.P. bib cock 15 mm dia of approved brand directed and specified. Iv) Agmeco brand (i) Bib Cock without Flange CAT No.CC 00204/CAT No.CN 00204
51Supplying and fitting, fixingChrome plated (CP) stop cock of approved brand of size as mentioned below and directed and specified (G.I. and CP pipes will be measured and paid separately) IV) Sona (a) 15mm dia Stop cock male-female /Angle stop cock
52Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. i) SONA make (b) Heavy type
53Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.
54Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.
55Supplying fiting and fixing PVCsingle tee with door of(Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.
56Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. in exposed surface or trencesas necessary complete at all levels including below G.L. as directed and specified.(a) 110 mm
57Providing fitting and fixing PVC cowel of ISI make completeas directed and specified.(ii) 110mm dia. PVC cowel of ISI make
58Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.
59Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately)Jaquar make a) Continental (i) Shower ram 190mm long light body with wall flange
60Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity (b)Polycon make
61Labour for erectingand placing PCVC Tank over the stagging up to a height of 5.00m complete as directed.(b) 1500 litre capacity
62Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75mm dia.
63Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.
64Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (A)) Exposed or in trenches e)40 mm nominal outer dia pipe
65Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe (B) Concealed pipe with cutting chases & making good the walls e)15 mm nominal outer dia pipe
66SEPTIC TANK Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil
67Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume
68Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3
69Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (d) In proportion 1:6.
70Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 15 mm thick
71Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (ii)Super Ductile (SD) TMT reinforcement bars
72Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire withnecessary shuttering , curing etc. completeincluding fixing in position as directed. b) 75mm thick slab
73Designing including vetting of design, fabrication, supplying, erection and installation / fixing in position of Pre-Engineered building G+3(04 storeyed building). Complete as per specifications approved drawings or instruction of the consultant architect. Pre-engineered Building" Super structure with structural steel work riveted , bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primary coat of approved steel primer & epoxy painting two or more coats including all holding down bolts, baseplates, gussetplates, nuts,bolts, washers, packings, rivets etc. complete. along with attachment / provision for fixing E&M, OHE and S&T equipments in the building steel roof structures Work to include all intermediate stages of activities not defined herein, but otherwise implied for total completion of work. The rate shall be inclusive of cost of all the materials, factory fabrication, loading,transportation,unloadingatsite,erection,fixinginposition, welding, grinding etc.complete. Thegaps betweenbase plates/ other gapswillbefilledupwith‘ForceRock’Chemical.Theratewillbe inclusiveofdesigningofthestructurewithstructuresteeltakinginto considerationthe load of total 04storeys i.e. G+3 building and vetting will be got done by the contractor within 10 days of award of work from reputed instituteslike IITs/NITs/Govt. Engineering Colleges. Charges of designing & vetting of steel structure will be included in the quoted & accepted rates, nothing extra will be paid on this account. Pre-engineered Building" Super structure with structural steel work will be designed taking into consideration all loads, pressures, wind pressures,localconditions,relevantearthquakezone,typeanduseof building, as per the standards, codes of practices etc. complete. Minimum weight of structural steel @ 65 Kg. /Sqm.of mesureable built upareaistobeconsideredwhiledesigningthebuildingincluding weightofstructuresteelmembers,baseplates,gussetplates,holding down bolts, nuts, bolts, rivets etc. complete. For actual weight above 65 Kg./ Sqm nothing extra will be paid. For all roofslab, roofslab,mumtyroofslab, stair case flights / waist slabs, landingsetc.,0.80mmthickG.I.decksheetingwillbeprovidedover structuralsteelroofingmemberswithselfdrivenshearbolts/screws. Thecostofthis itemis includedinthequoted&acceptedrateof the complete item. Builtupareaatallfloors fromoutertoouterof main walls" line will be measured in plan i.e. length & width of building parts in plan. Pipeshafts/ductsprojectingoutofmainwallswillnotbemeasured. Roof Projections,Chajjasoveropeningsoranyotherprojectionswill not be measured for payment. BOLTING:Providing, fabricating and supplying Hot - Dip Galvanized Holding Down Bolts including all assemblies and accessories that are required to be embedded in concrete work by other agencies are included in the rate quoted by the tenderer Bolts shall be of sufficient length to ensure that a minimum 40mm length of threaded portion is embedded in concrete.Threaded portion to be left projecting outside the concrete surface shall be as per requirement of supplier"s design and approved drawings. Cost of fabricated, assembled and supplied Bolts shall include all necessary expenses incurred , including costs of all washers, nuts, lock nuts and pins that may be required for securing the structural member with the embedded bolts.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail