}

Replacement / Up-Gradation Of Rim Seal Fire Protection System At 15 Tanks ( Pt 01 To Pt-15 ) At Phbpl Paradip Replacement / Up-Gradation Of Rim Seal Fire Protection System At 15 Tanks ( Pt 01 To Pt-15 ) At Phbpl Paradip, PHBPL Paradip-Odisha

Indian Oil Corporation Limited-IOCL has published Replacement / Up-Gradation Of Rim Seal Fire Protection System At 15 Tanks ( Pt 01 To Pt-15 ) At Phbpl Paradip Replacement / Up-Gradation Of Rim Seal Fire Protection System At 15 Tanks ( Pt 01 To Pt-15 ) At Phbpl Paradip. Submission Date for this Tender is 22-12-2021. Fire Protection System Tenders in PHBPL Paradip Odisha. Bidders can get complete Tender details and download the document.




Tender Notice

29840662
Corrigendum : Replacement / Up-Gradation Of Rim Seal Fire Protection System At 15 Tanks ( Pt 01 To Pt-15 ) At Phbpl Paradip Replacement / Up-Gradation Of Rim Seal Fire Protection System At 15 Tanks ( Pt 01 To Pt-15 ) At Phbpl Paradip
Open Tender
Indian
Odisha
PHBPL Paradip
22-12-2021

Tender Details

Replacement / Up-Gradation Of Rim Seal Fire Protection System At 15 Tanks ( Pt 01 To Pt-15 ) At Phbpl Paradip Replacement / Up-Gradation Of Rim Seal Fire Protection System At 15 Tanks ( Pt 01 To Pt-15 ) At Phbpl Paradip

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 16-Nov-2021 Prebid meeting Technical Bid 08-12-2021
2 29-Nov-2021 Clarification to pre-bid queries BOQ 08-12-2021
3 06-Dec-2021 Extension of bid submission period Date 15-12-2021
4 06-Dec-2021 Technical Bid Technical Bid 15-12-2021
5 16-Dec-2021 Tender submission date extension Date 22-12-2021

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Replacement/ Up-gradation of Rim Seal Fire Protection System at 15 Tanks (PT – 01 to PT-15) At PHBPL Paradip NOTE: 1. Please enable macros before filling the rates to see the quoted figures in words. 2. The bidder shall quote firm prices “Excess(+)/ At Par/ Less(-)” against the rates mentioned in the price schedule provided in BoQ1 sheet as per instructions provided herein after taking into account all the tender terms and conditions and scope of work. In case rates are quoted to more than 2 decimal places then, the amount quoted towards the tender shall be worked out for the rates quoted to first 2 decimal points without rounding off. 3. Only "Bidder Name", "Excess (+) or "At Par" or Less (-)" & "Percentage" are to be filled by the bidder in the designated "Sky Blue cells". For "At Par" selection, the percentage quoted shall be treated as 0.00 and quoted amount at par with estimate. 4. "Excess (+)" or "At Par" or "Less (-)" can be selected from the dropdown menu by clicking on the cell. 5. No changes shall be made by the bidder to S.No., Unit, Quantity. 6. In case of any difference in item description/unit/quantity in BOQ, then the item description/quantity/unit given in the tender document shall prevail. 7.The rates quoted by the tenderer shall include all cost towards equipment, labour & laboratory back-up, logistics, transport, spares, tools, tackles, consumables, etc., travel and stay arrangements and other incidentals including supply of materials as may be necessary for rendering the services as per detailed specifications. 8. Goods and Services tax as per GST Act 2017 for concerned services has been added to the base price of below mentioned services. If the bidder wishes to quote some other Goods and Services tax rate other than mentioned in the price schedule provided in BoQ1 sheet, they may quote the same in "Annexure H". Statutory variation on Goods and Services Tax as applicable for the category/service shall be to Owner’s account up to the contractual completion period. Reverse charges mechanism on Goods and Services tax amount shall be applicable as per Govt. rules. 9. Bidders are advised strictly not to alter or change the BOQ format/ contents. Bidders are also advised not to paste any image file or put any additional conditions in the BOQ work sheet. 10. Rates of items under Schedule-I are fixed by IOCL except as specifically stated in SCC, i.e. arrear payment toward revision in minimum wages Abbreviations: Unit M - METER, EA - EACH
Sl. No. Item Description
1RIM SEAL FIRE PROTECTION WORKS
2RIM SEAL FIRE PROTECTION WORKS FOR 15 Nos. OF 60000 KL DDFR TANKS AT PARADIP:(Tank no. PT-1 to PT-15) as per technical specifications & SCC consisting of 1. Design, furnishing of drawings with complete bill of material for the scheme by carrying out site visit, supply of all materials including specified spares at site for Automatic Detection cum AFFF (foam ) basedExtinguishing system complete for 15 nos. of crude oil storage tanks (double deck floating roof tanksof diameter 79.0 meters) at Paradip. Dismantling of the existing detection system including ADW units, JBs, cablings, trays, panels, HMIs , water filling arrangementetc in totality and defective modules, piping & nozzles if any as per requirement and submitting to owner in good condition at specified location. 2. Design engineering, supply, Installation & Integrating the new detection system (fire/heat sensing LHS cables/tubes made of SS316) with existing AFFF based extinguishing system consisting of Foam modules (SS-316L) of capacity 250 L having level detection device for AFFF solution fitted with structural stand, inert gas actuator, safety valve, etc. control arrangements/system piping, fittings, support structures, associated cabling,replacement of extinguishing system components as per requirement (detailed at SOR item no. 3) etc. 3. Design, Supply, Installation and Commissioning of main fire alarm control panel (main panel in Control room & repeater in fire station), graphic display panel, client PC, operating system, HMI software & diagnostic software, providing potential free contacts for alarms and status as per specifications for individual tanks to Owners PLC system, providing serial interface to Owner"s PLC system, and supply & installation of instrumentation items such as pressure switches, pressure gauges etc. control panel/junction boxes having multiple output facility to furnish healthy and fire status of individual tanks to suitable location outside tank dyke by providing suitable signal, power cabling etc., and all other associated items required for the scheme. 4. Complete erection, installation, testing (by simulation and actuation of the system for each tank, temporary power supply to be provided by the contractor), commissioning, trial run including replenishment of AFFF (to be provided by owner at SAT) during testing and carrying out all works as per the tender and as per the specifications/approved scheme/drawing etc. 5. Carrying out painting of all modules/structural with zinc phosphate primer to 50 micron followed by two coats of high build epoxy finish paint of 65 microns each to brand and shade as specified by Engineer-in -charge, including providing all inputs including laptop and necessary software for configuration of detection device and downloading of status, labour, tools and tackles etc. and handing over the system in satisfactory operating condition.
3SUPPLY OF MATERIALS OF FOAM SUPPRESSION SYSTEM AS PER TENDER SPECIFICATIONS
4Foam Modules, 250 litres Volumetric capacity, 200 litres Foam solution with suitable Stanchion & Canopy - SS316
5SS Foam Discharge piping of 1" size . Length of Each pipe shall be 40m.
6Foam Discharge Nozzles
7Manual Isolation ball valve (1" NB)
8AMC FOR 3 YEARS AND M&I WORKS
9AMC for 1st Year
10AMC for 2nd Year
11AMC for 3rd Year
12De-commissioning, dismantling, carrying and storing the dismantled items to owner"s store & re-installation & commissioning of the complete rim seal fire protection system to facilitate the crude oil tank M&I (Rate to be per tank)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail