Forest Department-FD has published Construction Of Community Toilets/Lavatory Blocks At Kibar Village Under Mitigation Plan Of Khanp Wildlife Chenab Division Kishtwar For The Year 2021-22 . Submission Date for this Tender is 06-11-2021. Toilet Bathroom Tenders in Dachhan,Kishtwar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil |
2 | Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil |
3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) including all leads lift carriage complete job |
4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed with 20% boulder including all leads lift carriage complete job |
5 | Dumping of stone including supply |
6 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 12. 5mm nominal size) Crushedincluding all leads lift carriage complete job |
7 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah including all leads lift carriage complete job |
8 | Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m |
9 | 20mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including all leads lift carriage complete job |
10 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete50 mm thick with 20mm nominal size stone aggregate including all leads lift carriage complete job |
11 | Providing and laying Reinforced Cement Concrete1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15°slope. excluding cost of centering and shuttering ,all work upto floor V level including all leads lift carriage complete job |
12 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete.Cold twisted bars @1.25% |
13 | Centring and shuttering including strutting, propping, etc.and removal of form for : Foundations: footings, bases of columns etc. for mass concrete. |
14 | Centring and shuttermg including strutting, propping etc.and removal of form for Suspended floors, roofs, landings, balconies and access platform |
15 | Centring and shuttermg including strutting, propping etc.and removal of form Edges of slab under 20 cms wide |
16 | Colour washing such as green blue or buff to give an even -t shadeNew work (two or more coats) with a base coat of white washing with lime. |
17 | Frames and trusses:- Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Secopnd class deodar wood |
18 | Frames and trusses:- Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood |
19 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
20 | Painting with oil type wood preservative of approved brand and manufacture on New work (two or more coats) |
21 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2 |
22 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gram/m2 |
23 | Providing 40x5 mm flat iron hold fast 40 em long including fixing to frame with 1 Omm diameter bolts, nuts and wooden plugs and em beddings in cement concrete block 30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) |
24 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.19.1.1 Long pan pattern white vitreous china W.C.pan of size 580 mm. |
25 | PProviding c;1nd fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
26 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception ,, of pipes and fittings. |
27 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms |
28 | Mirror with white plastic moulded frame oval shape 450x350 mm (Outer dimensions) |
29 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
30 | Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etccomplete.200x10 mm |
31 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Square shape 350mm internal dimensions |
32 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 1 06gms. |
33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. |
34 | Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
35 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
36 | Providing and fixing of steel grating |
37 | Providing and installation of water motor of 1.5 HP of brand Crompton,Bajaj, etc as approved by enginerrs |
38 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore medium |
39 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 20 mm dia. nominal bore medium |
40 | Providing and fixing PVC /supreme brand heavy pipes 100mm |
41 | Providing and fixing PVC/supreme brand heavy pipes 75mm |
42 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design |
43 | Providing and fixing Service Line(Aluminium10 sq m) |
44 | Iron D Boxof standradmake , 18 way. |
45 | MCB 6-32 Amp. |
46 | 5 Pin Sockets points including switch |
47 | Provision of electric Point (1.5mm sq,wire) |
48 | Light circuit with 2.5mm sq,wire |
49 | CFL saver 18 watt of approved quality. |
50 | Providing,Installation,testing and commissioning of Exhaust 300 mm dia. Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail