}

Repair And Maint Of Pump And Motors, Connected Lt Panels, Cleaning Of Ug Sump, Ohr And Ci And Di Pipe Lines, Sluice Valves, Various Sizes Of Rusted Distribution Pipes Gi And Ci And Pvc Pipes ( Map Accn ) And Other Connected Works At Ralawa, BANAR-Rajasthan

Military Engineer Services-MES has published Repair And Maint Of Pump And Motors, Connected Lt Panels, Cleaning Of Ug Sump, Ohr And Ci And Di Pipe Lines, Sluice Valves, Various Sizes Of Rusted Distribution Pipes Gi And Ci And Pvc Pipes ( Map Accn ) And Other Connected Works At Ralawa. Submission Date for this Tender is 30-11-2021. Electrical Panel Tenders in BANAR Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

29653238
Corrigendum : Repair And Maint Of Pump And Motors, Connected Lt Panels, Cleaning Of Ug Sump, Ohr And Ci And Di Pipe Lines, Sluice Valves, Various Sizes Of Rusted Distribution Pipes Gi And Ci And Pvc Pipes ( Map Accn ) And Other Connected Works At Ralawa
Open Tender
Indian
Rajasthan
BANAR
30-11-2021

Tender Details

Repair And Maint Of Pump And Motors, Connected Lt Panels, Cleaning Of Ug Sump, Ohr And Ci And Di Pipe Lines, Sluice Valves, Various Sizes Of Rusted Distribution Pipes Gi And Ci And Pvc Pipes ( Map Accn ) And Other Connected Works At Ralawas Under Ge Ba Repair And Maint Of Pump And Motors, Connected Lt Panels, Cleaning Of Ug Sump, Ohr And Ci And Di Pipe Lines, Sluice Valves, Various Sizes Of Rusted Distribution Pipes Gi And Ci And Pvc Pipes ( Map Accn ) And Other Connected Works At Ralawas Under Ge Ba

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 01-Nov-2021 Corrigendum No.1 Date 23-11-2021
2 10-Nov-2021 Corrigendum No.2 BOQ 23-11-2021
3 23-Nov-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 30-11-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 55680.0 /-
Tender Value
INR 27.84 Lakhs /-

BOQ Items

Name of Work: REPAIR/MAINT OF PUMP AND MOTORS, CONNECTED LT PANELS, CLEANING OF UG SUMP, OHR AND CI/DI PIPE LINES, SLUICE VALVES, VARIOUS SIZES OF RUSTED DISTRIBUTION PIPES GI/CI AND PVC PIPES (MAP ACCN) AND OTHER CONNECTED WORKS AT RALAWAS UNDER GE BANAR
Sl. No. Item Description
1PUMPING Excavation in trenches in any type of soil n.exc 1.5 m wide and depth as required to provide space for repairing of 200 mm bore DI/CI (Class ‘B) pipe line, bailing out water from the pit/trench for repairs the pipe line including cutting of existing damaged/leakage portion of pipe line as required length (max 1 Meter)andfixing/jointing of 200 mm bore including new CI /DI pipe line of 200 dia of required length at site with rubber rings, D clamps & detachable joints & nut bolts of suitable size and testing of pipe line to arrest the leakage to entire satisfaction of Engineer-in-Charge and returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25 cm in each layer. (Note: New pipe line shall be measured and paid seperatly under respective items of Schedule.)
2Excavation in trenches in any type of soil n.exc 1.5 m wide and depth as required to provide space for repairing 200 mm bore CI/DIpipe line, bailing out water from the pit/trench for repairs the pipe line and caulking of lead joint properly,for stoping leakage and testing the pipe line joint to entire satisfaction of Engineer-in-Charge and returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25 cm in each layer. Note for item No 1 to 4:-(1)The contractor should rectify the defects within 24 hours from the time of information. If contractor failed to rectify the defects within 24 hours, then the recovery will be made against the contractor @ Rs.1000/- per day for delay period (ii) Any type of tools , transportation and petty items required atsite will deemed to be inclusive of quoted rates.
3All as per item Ser No 2 here-in-before but 150 mm dia
4All as per item Ser No 2 here-in-before but 100 mm dia
5All as per item Ser No 2 here-in-before but 80 mm dia
6Supply and fix in repair cast iron sluice valve IS -14846/2000 marked flanged ends with stainless steel rasing spindle with CI operating wheel, CI cap with CI gate , brass ring, type PN 1.6 of size 200mm bore including nut, bolts, washers, rubber gaskets all as specified and directed (joints and CI/ DI speciails shall be measured and paid sepratly)
7All as per item Ser No 6.00 here-in-before but 150 mm dia
8All as per item Ser No 6.00 here-in-beforebut 100 mm dia
9All as per item Ser No 6.00 here-in-before but 80 mm dia
10Strip opening of top cover plate (stuffing box) of sluice valves and supply and fix in repair spindle made out of stainless steel and its brass chuck nuts for 150mm dia sluice valves including turning, metling, grinding as per existing size, replace rubber packing sheet and refixing the same position after repair/replacement of spindle alongwith new gland packing & nut bolts, washers complete all as specified and directed by Engr-in-Charge.
11All as per item Ser No 10.00 here-in-beforebut 100 mm dia
12All as per item Ser No 10.00 here-in-before but 80 mm dia
13Supply & fixing in repair cast iron NRV of 200mm dia Swing Check type G. M. Flap Drilling as per IS:1538 , Body tested to 15 Kg/Sq Cm and Seat tested to 10 Kg/Sq cm both ends flanged and drilled, valve, face rings, and 2 Nos of MS flanges required for fixing of NRVwith pipe lines / pipe fitting complete all as specified and directed by Engr-in-Charge.
14All as per item Ser No 13.00 here-in-beforebut 150 mm dia
15All as per item Ser No 13.00 here-in-beforebut 100 mm dia
16All as per item Ser No 13.00 here-in-before but 80 mm dia
17Supply and fix in repair Air Release Valve of 200 mm bore (Isolating) Cast iron double Air Valve acting (Isolating) Type G&K with Isolating Valve Internals Brass Nut, Natural Rubber Moulded on wooden Balls Drilling as per IS 1538 , Body tested to 15 Kg/CM Sq complete all as specified and directed by EIC.
18All as per item Ser No 17.00 here-in-before but 150 mm dia
19Excavation in trenches n.exc. 1.5M wide and n.exc. 1.50M in depth for foundation or for taking out/ down rusted water pipe lines etc.not.exc. 10 Sqm on plan and n.exc. 1.50M depth and getting out any type of soil.
20Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm in thickness all as directed by Engineer-in-Charge.
21Removing excavated material not exc 50 mtr depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-charge.
22Material and labour for CI/DI specials such as Bends (any type, radius and angle) tapers any type (straight, bend, increasing, decresing or double socket etc) Tee pieces single branch "Y" junction, classification, push or flexible rubber gasket joints, up to 200mm bore complete all as specified and directed.
23Taking out old/damaged CI/DI/GI Pipe lines upto 200mm dia with accessoriesfrom the trench complete all as specified and directed by EIC. Note: Earth work shall be measured and paid seperatly under respective items of schedules.
24Supply & ,laying in trenches/under culverts spigot& socketedductile iron pipe centrifugally cast, Class K-9 of size 150mm bore dia having ISI embossed/ engraved markconfirming to IS-8329/2000 in standerd length of 5.5 to 6.00 mtr suitable for push on rubber tyton joints (gasket D jionting) with cement mortar lining in the pipe all as specified and directed by Engineer-in-Charge (Note: Rubber Joints,CI/DI specials and earthwork shall be measured and paid seprately)
25All as per item Ser No 24.00 here-in-before but 200 mm dia
26Providing Run lead joint using old retrived lead from item above and making up any deficiency of lead quantity required as specified in SSR & IS specification by procuring new lead incl provision of jointing matrials like a spunyarn, caulking for 200mm bore dia pipe all as specified and directed.
27All as per item Ser No 26.00 here-in-beforebut 150 mm dia
28Supply only rubber gasketring joint suitable for spigot and socket pipes and DI/CI special fittings suitable for 200 mm bore DI pipe line complete all as specified and drected by EIC
29Supply only rubber gasketring joint suitable for spigot and socket pipes and DI/CI special fittings suitable for 150 mm bore DI pipe line complete all as specified and drected by EIC
30M&L for construction of brick mesonary valves chamberof size 1200 x 1200 x 1000 mm ( Internal dimensions ) with 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate15 mm thick rendering in CM 1:4 to internal walls, floors and upto 150 mm depth below ground level to external walls,including provision of3 mm thick MS Sheet cover fixed to Ms angle iron frame out of 40 x 40 x 4 mm thick angle iron with necessary MS flat iron stiffeners of size 40 mm x 4 mm including two coat of synthetic enamel painting over one coat of red oxide primer to all steel surfaces and provision of locking arrangement including necessary excavation and earth work in any type of soil all as specified and directed by Engr-in- Charge.
31DISTRIBUTION M & L for PCCtype B2 (using 40 mm graded stone aggregate ) of 1:2:4 ratioas in thrust block of pipe line and coping of pipe at bend, pillers at lorry filling points etc. completeall as specified and directed by Eng-in-Charge.
32Taking up or down rusted steel tubing and connections from trenches for following sizes upto 40 mm bore of GI tubing in repair/replacement completeall as directed by Engineer-in-Charge.
33Taking up or down rusted steel tubing and connections from trenches for following sizes from upto 50 to 100mm bore of tubing for in repair/replacement complete all as directed by Engineer-in-Charge.
34Taking up or down rusted steel tubing/PVC pipes and its connections from walls/ PCC and under road for following sizes upto 15/20/25 mm bore of tubing in repair/replacement completeall as directed by Engineer-in-Charge.
35Supply & laying,tubes, medium grade, galvanised Iron water tubes of 15 mm dia with screwed socket joint together with and includingall GI fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions etc. fixed to walls with clamps, hooks at suitable interval of height and ceiling or laid in floor complete all as directed by Engineer-in-Charge.
36All as per item Ser No 35.00 here-in-before but 20 mm dia
37All as per item Ser No 35.00 here-in-before but 25 mm dia
38Supply & laying,tubes, medium grade, galvanised iron water tubes with screwed socket joint together with and includingall GI fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions etc., laid in trenches of size 20 mm dia including testing complete all as specified and as directed. Note: -Earthwork shall be measured and paid seperately in relevant schedule of items.
39All as per item Ser No 38.00 here-in-before but 25 mm dia
40All as per item Ser No 38.00 here-in-before but 40 mm dia
41All as per item Ser No 38.00 here-in-before but 50 mm dia
42All as per item Ser No 38.00 here-in-before but 80 mm dia
43All as per item Ser No 38.00 here-in-before but 100 mm dia
44M&L for cutting exsting steel tubing in position for alterations or additions (or lengthening screw on pipe to from connector ) of the off sizes, upto 80 mm dia
45M&L for screwing existing steel tubing in position alterations or additions (or lengthening screw on pipe to from connector ) of the off sizes, upto 80 mm dia incls fittings
46Relaying ofold serviceable tubes (existing location to another location) , medium grade, galvanised steel water tubes with screwed socket joint together with and includingall GI fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions etc., laid in trenches/wall/road crossing of size upto 25mm dia including testing complete all as specified and as directed. Note for items Old serviceable tubes shall be reused. (ii) Earthwork shall be measured and paid seperatly.
47All as per item Ser No 46.00 here-in-beforebut 40/50 mm dia
48Supply and fix in repair stop valves of 40mm bore , cast copper alloy , screwed down , high pressure with crutch or butter fly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by EIC.
49Supply and fix in repair stop valves of 50mm bore , cast copper alloy , screwed down , high pressure with crutch or butter fly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by EIC.
50Supply and fix brass ball valves, high pressure suitable for 20 mm bore pipe , with polythene float and fly nut complete , screwed for iron pipe or brass ferrule complete all as directed by EIC.
51All as per item Ser No 50.00 here-in-before but 25 mm dia
52Drilling and tapping from ductileiron water mains (in position ) of 150/100 mmbore for branch connection of the internal dia of 20 mm with welded socket clips nuts-bolts in making the arrangementall as directed by Engr-in Charge.
53Taking out old foot valves after unscrewing of nut bolts and supply & fix brassfoot valve of size 150 mm dia including nut bolts, washers all as directed by Engr-in-Charge.Make:-Normex or its equivalent
54All as per item Ser No 53.00 here-in-before but 100 mm dia
55All as per item Ser No 53.00 here-in-before but 80 mm dia
56M&L for construction of brick mesonary valves chamber of size 900 x 900 x 1000 mm ( Internal dimensions ) with 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate15 mm thick rendering in CM 1:4 to internal walls, floors and upto 150 mm depth below ground level to external walls,including provision of3 mm thick MS Sheet cover fixed to Ms angle iron frame out of 40 x 40 x 4 mm thick angle iron with necessary MS flat iron stiffeners of size 40 mm x 4 mm including two coat of synthetic enamel painting over one coat of red oxide primer to all steel surfaces and provision of locking arrangement including necessary excavation and earth work in any type of soil all as specified and directed.
57Supply and fix in repair/replacement of mechanical type water level indicator at UG sumps having 2.5 Meter depth includingstainless steel multistranded wire ropes, float valves of suitable size and its balancing weight complete all as specified and directed.
58Supply and fix in repair/replacement ofLED Aviation lights at top of the OHR having 18-21 Meter staging including 3 core multistranded copper wire of suitable size complete all as specified and directed.
59Supply and fix Earth contunity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe of 32X6 mm galvanised iron strip complete all as specified and directed by Engr-in-Charge.
60M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 metre deep below ground level) with the top edge of earth plate at a depth not less than 1.5 metre below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm in alternate layers on all sides and including GI earthstrip of 32x 6 mm as earth electrode boltedwith GI nuts, bolts & check nuts and rivettedto earth (Plate) electrode at one end and connected toPanelat the other, earth strip protected by and incl GI pipe 40 mm dia (medium grade) from top of electrode to Panel and also incl watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B0using 12 mmgraded crushed stone aggregate, RCC cover with handle, funnel, wire mesh including necessary excavation & earth work, etc as shown on electrical plate No 5 of SSR Part I. Complete all as specified and directed by Engr-in-charge.
61PUMPING AND OHR/UG SUMP Testing of portable water from Govt approved Lab sample taken in sterile bottole from UG Sump at main pump & user tap and Water Analysis test report as per IS: 10500 : 2012 to be carried out from Govt college/ Govt approved labs. Note : cost of samplling bottle, transportation and portable water testing charges will be deemed included in the quoted rates by the contractor.Parameters given are as under below : (a) pH value (b) Electrical conductivity (c) Turbidity(d) TDS (e) TSS (f) Hardness (g) Iron (h) Chlorides(j) Fluorides (k) Magnesium(l) Sulphate (m) Nitrate (n) Total alkalinity (o) Residual free chlorine
62Supply and fix of water pressure gauge 4" dial0 to14 kgs/Sqcm of dial needle model round fixed on discharge line of centrifugal pump with control valve all as specified.
63M&L for lifting out of horizantal type submersible pump set from the UG sump having 2 meter depth by providing lifting arrangement,transporting the same to & fro workshop for repairs and strip opening of submersible pump set of 72 HP capacity after unscrewing th nuts, bolts, studs, minor connecting items & disconnecting the power cable from its starterfor servicing or replacement of defective parts of the motor and pump and lowering in sump the same after repair and making connection complete all as specified and directed by Engr-in-charge. Note:- spare parts of motor and pump will be measured and paid separately under relevent item of this schedule.
64Bearing of pump set as per existing make and size
65Water seal O ring of the pump set as per exsisting size
66Thrust plate including connected items of the pumpset as per existing make and size
67Impeller of the pump as per exsisting make and size including connected items
68Bush of pump set as per existing make and size
69Rewinding of 72 HP horizantal type submersible motor
70M&L forserving ofsoft starters by well conversant soft starter electrician of various capacity and replacement of burnt out /defective parts of soft starters of 15/20/60 HP capacity as per existing make in the existing LT Panel including tightening of control/power cables complete all as specified and directed by Engr-in-Charge.
71Replacement of 3 phase contactor of 415V, 50 Amp for 20 HP soft starter
72Replacement of 3 phase contactor of 415V, 40 Amp for 15 HP soft starter
73Replacement of 3 phase contactor of 415V, 100 Amp for 60 HP soft starter
74Replacment of control wiring of 2.5 sqmm copper multistranded cables
75Replacement of contactor coil of 50 Amp 3 phase contactor
76Replacement of contactor kit of 50 Amp for 3 phase 415V contactor
77-do -but 100A Note : Makes of item No (a) ot (g) as per existing make
78M&L forserving ofstar delta starters by experienced electrician of various capacity and replacement of burnt out /defective parts of starters of 12.5/20/30 HP capacity as per existing make in the existing LT Panel including tightening of control/power cables including suitable lugs/thimble complete all as specified and directed by Engr-in-Charge.
79Replacement of 3 phase & neutral contactor of 415V, 40 Amp for 20 HP starter
80Replacement of 3 phase & neutral contactor of 415V, 25 Amp for 12.5 HP starter
81Replacement of 3 phase & neutral contactor of 415V, 50 Amp for 30 HP starter
82Replacment of control wiring of 2.5 sqmm copper multistranded cables
83Replacement of contactor coil of 50 Amp 4 phase contactor
84Replacement of contactor kit of 50 Amp for 4 phase 415V contactor Note : Makes of item No (a) ot (f) as per existing make
85M&L forstrip opening / dismantling after disconnecting the power cables & taking out the existing electric motor of 15/20/30/60 HP Centrifugal type from foundation and transporting the same to workshop for repairs and re-fixing the same on existing locationand making electric connection including alignment, replacement of coupling bushes, testing and commissioning complete. Note :- Rewinding & bearings will be measured seperately under appropriate item of schedule.
86Rewinding of415 volts, 50Hz 3 phase 2950RPM electric motor with super enamelled copper wire as per specified gauge/ size, suitable for60 HP Centrifugal motor complete all as specified & directed by EIC. Note:- Contractor will produce guarantee letter for the minimum6 month ofthe winding of the motor after satisfactory testing of the motor.
87All as per item Ser No 67.00 here-in-before but upto 3 HP motor
88All as per item Ser No 67.00 here-in-before but 15 HP motor
89All as per item Ser No 67.00 here-in-before but 1450 RPM& 20 HP motor
90All as per item Ser No 67.00 here-in-before but 1450 RPM& 30 HP motor
91S&F in repair bearing DE/NDE side suitable for 60 HP Centrifugal/monoblocktype motorcomplete all as specified & directed by EIC.
92All as per item Ser No 72.00 here-in-before but 3 HP motor
93All as per item Ser No 72.00 here-in-before but 15 HP motor
94All as per item Ser No 72.00 here-in-before but 20 HP motor
95All as per item Ser No 72.00 here-in-before but 30 HP motor
96M&L for strip opening of monoblock pump set from foundation after unscrewing the nuts,bolts, & sucion /dilivery pipes of 15 HP capacity and transporting the same to workshopfor repair and re-fixingthe same with existing electric motorwith proper alignment , connection withsuction and delivery pipe lineincluding rubber packing or any other petty items required for fixing complete testing and commissioningafter satisfactorily repair. Note:- other Items of pump will be measured and paid separatelyunder relevent items of this schedule. (II) Contractor will produce guarantee letter for minimum 6 months of the all items of the pumps after satisfactory testing of the pump.
97S&F Bush bearing as per existing size Make:- SKF
98S&F Shaft sleeveof bronze/brass as per eixsting size
99S&F Impeller of siutable size and make as per existing
100S&F waterseal with two rubber rings on shaft of rotor
101Air lock
102S & F ball bearing at DE side of suitable number with gland packing
103M&L for painting with two coat of synthetic enamel paint after cleaning & scrubing of fins of motor/pump with sky blue colourand written with letter of size 1cmx1cm in english type of motor/pump, capacity and install date mentioned on motor neat and clean with white colour of letter as per directed by Engr-in-Charge
104S & F of PVC fan of 15HP motor & its locking pin/nuts complete.
105M&L for strip opening of centrifugal pump set from foundation after unscrewing the nuts,bolts,couupling & sucion /dilivery pipes of 20 HP capacity and transporting the same to workshopfor repair and re-fixingthe same on existinglocation & couple with existing electric motorwith proper alignment , connection withsuction and delivery pipe lineincluding rubber packing or any other petty items required for fixing complete testing and commissioningafter satisfactorily repair. Note:- other Items of pump will be measured and paid separatelyunder relevent items of this schedule. (II) Contractor will produce guarantee letter for minimum 6 months of the all items of the pumps after satisfactory testing of the pump.
106Remetaling, grinding to pump shaft including balancing, keys, groves etc on leathe machine
107S/F shaft SS Keys for Couplingof motor/ pump set shaft
108S & F air vent cock of pump set as per existing size
109S & F brass/bronze Impeller, with keys
110S/F gland sleeves (CI) at DEor NDE side
111S & F Impeller seal O ring
112S/F bearing housing assembly
113S & F water lubricating PVC pipe with both ended nuts of suitable size
114S/F coupling of size 5" dia for motor andpump set including rubber groves bushes, nuts, bolts complete
115S & F ball bearing at DE & NDE of suitable number with gland packing
116S&F coupling guard with nut-bolts
117M&L for water seal suitable for 20 HP pump set
118M&L for painting with two coat of synthetic enamel paint with sky blue colour.
119S & F of PVC fan of 20 HP motor & its locking pin/nuts complete.
120M&L for strip opening of centrifugal pump set from foundation after unscrewing the nuts,bolts,coupling & sucion /dilivery pipes of 30 HP capacity and transporting the same to workshopfor repair and re-fixingthe same on existinglocation & couple with existing electric motorwith proper alignment , connection withsuction and delivery pipe lineincluding rubber packing or any other petty items required for fixing complete testing and commissioningafter satisfactorily repair. Note:- other Items of pump will be measured and paid separatelyunder relevent items of this schedule. (II) Contractor will produce guarantee letter for minimum 6 months of the all items of the pumps after satisfactory testing of the pump.
121Remetaling, grinding to pump shaft including balancing, keys, groves etc on leathe machine
122S/F shaft SS Keys for Couplingof motor/ pump set shaft
123S & F air vent cock of pump set as per existing size
124S & F brass/bronze Impeller, with keys
125S/F gland sleeves (CI) at DEor NDE side
126S & F Impeller seal O ring
127S/F bearing housing assembly
128S & F water lubricating PVC pipe with both ended nuts of suitable size
129S/F coupling of size 5" dia for motor andpump set including rubber groves bushes, nuts, bolts complete
130S & F ball bearing at DE & NDE of suitable number with gland packing
131S&F coupling guard with nut-bolts
132M&L for water seal suitable for 30 HP pump set
133M&L for painting with two coat of synthetic enamel paint with sky blue colour.
134S & F of PVC fan as exising size of 30 HP motor & its locking pin/nuts complete.
135M&L for strip opening of centrifugal pump set from foundation after unscrewing the nuts,bolts,coupling & sucion /dilivery pipes of 30 HP capacity and transporting the same to workshopfor repair and re-fixingthe same on existinglocation & couple with existing electric motorwith proper alignment , connection withsuction and delivery pipe lineincluding rubber packing or any other petty items required for fixing complete testing and commissioningafter satisfactorily repair. Note:- other Items of pump will be measured and paid separatelyunder relevent items of this schedule. (II) Contractor will produce guarantee letter for minimum 6 months of the all items of the pumps after satisfactory testing of the pump.
136Repairing of main pump shaft made of carbon steel with key by means of remetaling and grinding on leathe machine as standard size.
137Main bearing of the pump DE/NDE side of 6313C3/6313C3 or as existing sample.
138Shaft sleeve of stainless steel
139Impellerof brass/bronze as per existing size
140Neck ring.
141Air cock with adopter.
142Gland dori,Gland plate split type completewith bronze bush, bolts,nuts & washers etc.
143MS coupling for shaft of pump and motor complete with rubber bush and nut bolts etc and key.
144S & F of PVC fan as exising size of 60 HP motor & its locking pin/nuts complete.
145M&L for reinforced cement concrete in the ratio M-20 with 20 mm graded aggregatein foundations including dismantling the old foundation all as specified and directed by Engr-in-Charge.
146M & L for PCCtype B2 ratio 1:2:4 (using 20 mm graded stone aggregate ) as in platform, base etc. completewith quick setting cementcomplete all as specified and directed by Eng-in-Charge.
147M & L for PCCtype B0 in the ratio of 1:2:4 (using 12.5 mm graded stone aggregated ) as in platform, base etc. complete including finishing the surface with quick setting cement including whitewashing and painting withsynthetic enamel paint of all metal parts complete all as specified and directed by Eng-in-Charge.
148M/L for channelsfabricated in the shape of frame as per site requirementand fixing in side the foundationand over the PCC foundationwith suitable size and quantity of nuts, bolts and washer completeall as directed by Engr-in-Charge.
149Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
150Supply and fix Butter fly valve of 80 mm dia Make:- Zoloto/Vijay/Upadhyay
151M&L for taking out old rusted/unserviceablecable tray of any type and supply and fix Perforated GI Cable trayof 150 mm width and 25 mm depth , having 16 guagecompletefixed to Wallor laid in floor to run the cableetc with suitable clamp and spacersfor protection of cable complete all as specified anddirected.
152Cleaning of RCC Semi under ground water storage tank of 25000 gallons cap of 2.5 Meter deep from top located atpump househaving two compartments including taking out the dead storage water by means of pumping or by manually and bailing out of mud if any and applying two coats of white wash internally all internal walls & portition walls andwriting down the date of cleaning, cap of under ground storage tank with white synthetic enamel paint of 40mm size over the back ground of black paint at the place as shown all as specified and as directed by Engr-in-charge.
153All as per item Ser No 88.00 here-in-before but 50000 gallons capacity at hill top.
154Cleaning of RCCOHT water storage tank having 18/21 meter staging of 50000 gallons cap located atMAP Accn area & main pump house area having two compartments including bailing out the dead storage water by means of pumping or by manually and taking out of mud/sludge/soil and applyng with two coats of white washto all internal walls & portition walls andwriting down the date of cleaning, cap of under ground storage tank with white synthetic enamel paint of 40mm size over the back ground of black paint at the place as shown all as specified and as directed by EIC.
155Cleaning of RCCSemi under ground water storage tank of 1.0 LG capacity located at main pump house areahaving two compartments including taking out the dead storage water by means of pumping or by manually and taking out of mud if any and applying with two coats of white wash to all internal walls & portition wallsand writing down the date of cleaning, cap of under ground storage tank with white synthetic enamel paint of 40mm size over the back ground of black paint at the place as shown all as specified and as directed by EIC.
156All as per item Ser No 91.00 here-in-before but 1. 5 LG capacity at Banar.
157Material & labour for taking out old PCC vent pipe of any size and fixing of 150mmdia PCC/RCC vent pipe at roof of semi UG sump of 1.5-2.0 feet long including drilling in roof of sump of suitable dia mortar complete all as specified and directed.
158Painting of iron angle, MS sheet, grills, pipe lines with suitable colour after scrubing & cleaning of old rusted surface by spray painting system/machinemaking rasing and distribution line indication arrow mark with black paint and writting letter not exc 30 cm height of letter on motor capacity ,installation date etc complete all as directed by Engineer - in -Charge
159Cutting of PCC floor for trench/drain or making holes in the building walls for passing of cables/earth strips & drain pipe as required on site basis and making good surface with cement mortar complete all as directed by Engineer - in -Charge
160M&L for stone masionary squared rubble walling jodhpur type brought uptocoursewell bonded bedded and soliding hearted built will cement mortor 1:4 as per pecpcified as dirtected by Engr-in-Charge
161M&L for rendered 10mm thick plaster wall/surface for two coat as per specified as dirtected
162M&L for white washing on fresh plaster wall/surface for two coat as per specified as dirtected
163Supply only D Climp/Flat clamp and plug for arresting/breaking of unauthorised tapping complete all as specified and dirtected by EIC
164Supply only ARV PVCball as per existing size suitable for eisiting size of air release valve complete all as specified and dirtectedbt EIC
165Servicing of motor under minor maintance of 15/20/30 HP motor gressing check leakage nut bolt tighting checking lose electrical connection etc complete as per specified as dirtected by EIC
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail