Providing Furniture For Gramsachivalay Building At Bidal Tal Man- 1 Providing and fixing in position, acoustical ceiling made from gypsum plain panels on approved heavy duty galvanised iron frame ceiling channels at 450 milimetre center to center and intermediate channels not more than 1200 milimetre c/c, along with ply wood forms suspended with hangers from roof, in front of 1000 grams per square metre synthetic wool 50 milimetre thick, with paint, including cost of required cut-outs, decorative mouldings / finishing items and scaffolding, as per architectural and acoustical design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete.Item / Page No : 7 / 457Additional Specifications : The work shall be done as per instructions of Engineer in charge. 2 Providing and fixing in position, carpet more than 800+ grams per square metre, made with 100 percent stain proof fibres of approved make along with 5 milimetre underlay as per architectural and acoustical design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete.Item / Page No : 13 / 458Additional Specifications : The work shall be done as per instructions of Engineer in charge. 3 Providing and fixing in position, heavy duty fully upholstered auditorium chairs 520 milimetre center to center tip-up type. Height of back should be less than 1030 milimetre with plastic protective cover on back and bottom having teak wood handles. Back to back distance is 1000 milimetre. The auditorium chairs should be of following specifications - 1. Powder coated heavy duty mild steel stand. 2. Individually moulded, ergonomically designed seat and back cushions. 3. Moulded polyurethane foam cushion. Polyurethane foam density 48 – 52 kg/cum 4. Moulded polyurethane foam manufactured in certified Internation Standards Organization 9001 facility to ensure consistency in density for longevity. 5. Upholstered in foam laminated stretch sandwich fabric for clean finish and soft comfortable feel as per the colour and pattern selected by the client. 6. Seat and back should have moulded synthetic protective cover. 7. Wooden or polyurethane armrest 65 milimetre X 20 mm - 330 mm long. 8. Mounted using Anchor fasteners.Item / Page No : 18 / 459Additional Specifications : The work shall be done as per instructions of Engineer in charge. 4 Providing and fixing vertical blinds of approved make and shade of 100 milimetre regular fabric with powder coated aluminium channel with telting polyvinyl chloride chain and bottom weight plate with all necessary fixtures and fitting, excetra complete.Item / Page No : 20 / 459Additional Specifications : 1. The work shall be done as per instructions of Engineer in charge.2. Sample to be finalised by Engineer In-charge prior execution of work. 5 Providing and fixing of Executive table of size 1800 milimetre long X 900 milimetre depth X 750 milimetre height, top and gable end to be made of membrane finish with soft water fall edges and curved panel and decorated anodized section modesty panel to be made of 18 milimetre thick prelaminated particle board with polyvinyl chloride edge band as per drawing.Item / Page No : 21 / 460Additional Specifications : The work shall be done as per instructions of Engineer in charge. 6 Providing and fixing table of size 1200 milimetre X 600 milimetre X 750 milimetre Top made from 25 milimetre prelaminated particle board. All edges are covered by 2 milimetre thick polyvinyl chloride edge bands glued by hot melt glue applied by auto edge banding machine. Legs C Shape made from cold rolled close annealed sheet with powder coat finish. Modesty panel made from 18 milimetre both side prelaminated particle boards. All edges are covered by 0.8 milimetre polyvinyl chloride edge bands glued by hot melt glue applied by auto edge banding machine. Keyboard tray (without mouse tray) metal powder coated - black colour, central processing unit Trolley metal powder coated - black colour, 3 drawer pedestal unit having overall size 392 milimetre long X 450 milimetre depth X 680 milimetre height with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 milimetre prelaminated particle board.Item / Page No : 28 / 462Additional Specifications : The work shall be done as per instructions of Engineer in charge. 7 Providing and fixing conference main table of size 3600 milimetre long X 1400 milimetre depth X 750 milimetre height, made up of 18 + 18 milimetre thick MDF top with polyvinyl chloride membrane finish and waterfall edge profile. Aluminium anodizied finish beeding of 4 milimetre thich is running all over the table top edge. Gable ends is aerofoiled shape with front edges in polyvinyl chloride membrane finish and rest in prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and data wiring. Modesty panel to be made of 18 milimetre thick prelaminated particle board with polyvinyl chloride edge band. Access flap for wire manager 2 Nos.Item / Page No : 31 / 463Additional Specifications : The work shall be done as per instructions of Engineer in charge. 8 Providing and fixing low height openable steel storage of size 900 milimetre X 450 milimetre X 750 milimetre height with 2 adjustable shelves. Complete body and shutter made in 0.8 milimetre thick and top in 2 milimetre thick cold rolled close annealed sheet, 2 shutter to be mounted with the help of cup hinges, and 4 adjustable levelers. Enitre storage in powder coated finish with 60 microns to 80 microns, with 25 milimetre thick additional top on top of storage as as per drawing.Item / Page No : 35 / 465Additional Specifications : The work shall be done as per instructions of Engineer in charge. 9 Providing and fixing of book case with glass shutter of size 825 milimetre long X 300 milimetre depth X 1650 milimetre height to be made out of complete body in 0.7 milimetre thick cold rolled close annealed sheet and shutter in 1.2 milimetre thick cold rolled close annealed sheet with glass pannel, in powder coating finish as per drawing.Item / Page No : 39 / 466Additional Specifications : The work shall be done as per instructions of Engineer in charge. 10 Providing and arrangemnt of mid back chair, normal synchronized mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong nylon base with leather upholstery.Item / Page No : 42 / 466Additional Specifications : The work shall be done as per instructions of Engineer in charge. 11 Providing and fixing 3 seater public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.Item / Page No : 44 / 466Additional Specifications : The work shall be done as per instructions of Engineer in charge. 12 Providing and fixing 4 legged lab stool, legs made of 16 Guage 45 milimetre outer dimension mild steel pipe, duly painted, with a 304 grade stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw, as per design and drawing and instructions of Engineer in-charge.Item / Page No : 51 / 477Additional Specifications : The work shall be done as per instructions of Engineer in charge. 13 Providing and fixing foldable aluminium ladder 1500 milimetre height.Item / Page No : 52 / 477Additional Specifications : The work shall be done as per instructions of Engineer in charge. 14 Providing and fixing sofa set 3+1+1 brown and cream leather Dimensions - length 182.5 centimetre, breadth 100 centimetre, height 100 centimetre, weight - 66 kg. Seating capacity - five seat.Item / Page No : 53 / 477Additional Specifications : The work shall be done as per instructions of Engineer in charge. 15 Providing and fixing in position, 12 milimetre waterproof ply wood and 1.5 milimetre laminate panels above the fabricated frame on one side, as per architectural and acoustical design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete.Item / Page No : 15 / 458Additional Specifications : The work shall be done as per instructions of Engineer in charge. 16 Providing and fixing of tea table 900 milimetre X 750 milimetre X 450 milimetre with 12 milimetre thick colour eitched tempered glass with bevelled drawing made out of 18 milimetre thick waterproof ply. The outer laces to be finished with high quality 4 milimetre thick veneer or 1 milimetre thick mica, etc.Item / Page No : 54 / 478Additional Specifications : The work shall be done as per instructions of Engineer in charge. 17 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m X 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols excetra with approved colour shade paint complete, on M.S.angle of size 35 X 35 X 3 milimetre frame with properly cross braced mild steel angles of size 35mmx35mmx3mm duly painted including Two mild steel angle iron posts of size 65 milimetre X 65 milimetre X 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including, excavation, refilling, transportation, and labour etc complete. Spec. number As directed by Engineer in ChargeItem / Page No : 36 / 73Specification No : MoRTH-801Spec. Page No : ---Additional Specifications : The work shall be carried out as per instructions of Engineer in charge.
