Rural Engineering Department has published Construction Of Gaushala Center At Bhadua Block Nidholi Kala Etah Construction Of Gaushala Center At Bhadua Block Nidholi Kala Etah. Submission Date for this Tender is 15-11-2021. Building Work Tenders in ETAH Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 2 | Earth work in fillind in ordinary soil including cartage up to 2.0 kg distance. |
| 3 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work. |
| 4 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. |
| 5 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1)Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment of soil along external perimeter of building 7.5 liters/sqm.(5) Treatment of soil under apron along external perimter 5 liters/sqm. |
| 6 | Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 7 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) |
| 8 | Paintingon D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7kg/sqm approxincluding cost of fuel if any. |
| 9 | Brick work in super-structure above plinth level up to floor two level (up to two storeys) includingnecessary cutting and moulding of bricks as requiredand also including honey comb brick work thickness of wall 230mm thick to (1:6 cement & coarse sand). |
| 10 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item. |
| 11 | As in item no. 10 above but for R.C.C. work in footing/raft (Using 1:1.5:3 Mix concrete) M-20 |
| 12 | As in item no. 10 above but for R.C.C. work in Column (Using 1:1.5:3 Mix concrete) M-20 |
| 13 | Reinforcedcementconcreteworkinbeams,lintels suspendedfloors,roofshavingbalconies,shelves,chajjas, bands, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishingandreinforcement,with1:1.5:3(1cement:1.5 coarse sand : 3 graded stoneaggregate 20 mm nominal size) |
| 14 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of for heavier Beams excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20 (Using 1:1.5:3 Mix concrete) M-20 |
| 15 | Same as in item No. 9 but in1: 4cement and coarse sand mortar in sub structure for wall thickness 12 cms & below brick work. |
| 16 | Class-150(NonModular)brickworkin1:4cement andCoarsesand mortarinfoundationandplinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 17 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Door / windows & Staircase grill.Z-Section windows (Openable) |
| 18 | P/F TMT Bar Fe-500 iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 19 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes. |
| 20 | 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) |
| 21 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand. |
| 22 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 course sand |
| 23 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 fine sand. |
| 24 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 course sand |
| 25 | 20mmcementplaster1:3(1cement:3coarsesand) finished with3mm thick floating coat of neat cement. |
| 26 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steelprimerandtwocoatsofapprovedpaintonoverlappingof sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excludingthe costof purlins, rafters and trusses and including cutting to size and shape wherever required. "(0.80 mm thick with zinc coating not less than 275 gm/m²)" |
| 27 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete as per DSR No 10.19 |
| 28 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. |
| 29 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate |
| 30 | 25mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement. |
| 31 | Providing and fixing glass strips of 3.5 mm. thickness in joints of floor, and skirting at the time of laying floors flush with floor level including labour, tools plants etc. complete. (a) of 35 depth |
| 32 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. (80x1.25 mm M.S. laths with 1.25 mm thick top cover) |
| 33 | Providing and fixing ball bearing for rollong shutters. |
| 34 | Providing Ridges of width overall width plan 0.80cm G.S. Sheet fixed with polymer J & L hooks, bolts, angle need 8mm dia G.I. limpet and bitumen washer complete. |
| 35 | Making drain along with the apron. |
| 36 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) Non- decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.(35mm thick Single leaf) |
| 37 | S/F 6mm (1/4") thich china white glazedceremic tiles in flooring or dado over 1:3 ( 1cement : 3coarse sand) laid and jointed with white cement (with pigment) slurry including rubbing and polishing of joints etc. complete. |
| 38 | M-150 Class Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming and including supply of all materials, labour and T & P etc requred for proper completion of the work. |
| 39 | Providing & fixing glass panes with Atul or equivalent ISI marked quality putty, brads, and spriings complete including cost of materials, labour etc. : 3.8 to 4.7 mm thick |
| 40 | Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3, Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 41 | Finishing wall (Two coats) with water proofing cement paint of approved make such as super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undercorated wall surface over and including one coat white cement primer to give and even shade after thoroughly brushing the surface, including coat of all materials, labours, T & P etc. complete required for proper completion of the work. |
| 42 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface) |
| 43 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm. |
| 44 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (a) 200 mm x 10mm |
| 45 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm |
| 46 | Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable asearth continuity wire and piano type switch etc. complete in all respects. |
| 47 | Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.0 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash. |
| 48 | Wiring point for plug with 1.0 sq.mm FRLSH PVC insulated multistrandsingle core Copper Conductor cable in PVC conduit pipe partly concealedin wall&partlylaidin slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and piano type switches & socket etc., complete in all respects as directed, including matching color wash. |
| 49 | Addition when modular type switches etc are used in place of piono type switches etc. in various wiring points. Addition for light / fan points with modular type switchin place of piono type switch. |
| 50 | Addition when modular type switches etc are used in place of piono type switches etc. in various wiring points. Addition for plugpointswith modular type switchin place of piono type switch. |
| 51 | Supplyfixingand concealing of20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. ( T.V. /Telephone) |
| 52 | Supply & wiring of submains with two number2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick)PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduitcomplete in all respect. |
| 53 | Supply & fixing of single wall bracketon matching M.D.F.E.G.boardbase etc. complete in all required.Cat. A |
| 54 | S/F of LED tube light with batten suitable for up to 1X22 watt LED tube light fitting including tube on suraface complete in all respect.CAT-AAA (a) 1x22 Watt) |
| 55 | Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve 5 - 32 amps.Cat. A |
| 56 | Supply and fixing of 6Amp to 32 Amp DP MCB(10KA)C Curve 32 Amp. DP MCB(10KA) C Curve-Cat. A |
| 57 | Constructionofrecessof480mmx480mmx200mm sizeforfixing of main boards,distribution boards of all sizes including cutting of brick work, providing lintel of suitable size and thickness, plastering etc. with supply of all materials labour T&P for proper completion of work. |
| 58 | Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followedby two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 480x480x200 mm. size |
| 59 | Supply andfixing ofsingleleaffactory fabricatedM.S. coverwithmountingframe for 480mmx480mmx 200mmsizesunkfabricatedfrom18SWGM.S.sheet duly painted with red oxide primer followed by two coats of synthetic enamel spraypaint complete withsteel almirah type handle andlocking arrangements andfixed withholdfastsetc.includingsupplyofallmaterials, labourandT&Petc.requiredforpropercompletionof work. |
| 60 | Supply and fixing of flush/surface mounting distribution boardswith additional metal door without MCBcomplete in all respects.12Way SPN Cat. A |
| 61 | suppy and fixing of surface/flush mounting 8way SPN DB box (consumer Unit) with 63Amp. DP isolator for incoming but without MCB complete in all repect. |
| 62 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. |
| 63 | Supplyfixingofelectronic fan regulator (Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 64 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.10 sqmm 2 core |
| 65 | Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 10 Sq.mm |
| 66 | SupplyandfixingofLEDTubeLightwithbatten suitable forupto1X 22watt LED tube lightfitting includingtubeonSurfacecompleteinallrespect. CAT-AAA |
| 67 | Supply and burying of 40mm dia x 4.5 metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. |
| 68 | Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects. |
| 69 | Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. |
| 70 | Supply and fixing of 40/63 Amp MCB(10KA)C Curve 40 Amp. 4 Pole MCB Cat. A |
| 71 | Construction of recess distribution board of including cutting of brick work providing lintel of suitable size (600 x 480 x 200) mm & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 300x300x200 mm. size |
| 72 | CABLES Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sqmm 2 core |
| 73 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. (internal work) 25mm Ø i) Exposed on wall |
| 74 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. ii) Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall. b) 15mm dia nominal bore |
| 75 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. a) 15mm dia nominal bore |
| 76 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work. b) 25mm dia nominal bore. |
| 77 | Providing and fixing gun metal gate valve with wheel of approved quality.a) 32mm dia nominal bore |
| 78 | Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore |
| 79 | Providing & fixing GI pipes complete with G.I. fittings includingtenching and refilling etc. (external work) a) 50mm nominal bore. |
| 80 | Providing & fixing GI pipes complete with G.I. fittings includingtenching and refilling etc. (external work) b) 32mm nominal bore. |
| 81 | Providing & fixing GI pipes complete with G.I. fittings includingtenching and refilling etc. (external work) c) 25mm nominal bore. |
| 82 | Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.a) 50mm nominal bore. |
| 83 | Constructing masonry Chamber for underground CI inspection chamber and bends with bricks in cement mortar 1:4 (1 cement :4 coarse sand ) CI cover with frame (Light duty) 455 x 610 mm x 45mm internal dimensions total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement : 2 Coarse sand : 4 graded stone aggegate 20 mm nominal size) foudation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with floating coat of meet cement on walls and bed concrete etc.complete as per standard design with ) inside dimensions 455 x 610 mm and 45 cm deep for sigle pipe line : with common burnt clay F.P.S (non modular) brick of class designation M-150 |
| 84 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 85 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 650x 450 mm with single 15 mm C.P. brass pillar tappillar tap. |
| 86 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Felxible pipea) 32mm dia |
| 87 | Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size).Including cost of cutting holes & making good the walls etc. a) for 100mm dia pipe. |
| 88 | Providing and fixing PVC pipe confirming to IS make working pressure 6kg/cm2 including testing labour T & P and all complete fittings. (110 mm diameter) |
| 89 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. a) 110mm |
| 90 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110mm |
| 91 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.(internal work) Exposed on walla) 25mm dia nominal bore (medium duty) |
| 92 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 15mm nominal bore |
| 93 | Providing & fixing CP brass bib cock of approved quality conforming to IS 893115mm nominal bore |
| 94 | Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore |
| 95 | Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore |
| 96 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter. |
| 97 | Providing, laying and joining glazed stone ware pipes grade "A"with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 100mm diameter |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
