Rural Development Department has published Construction Of Anganwadi Building No 2 At Pinjarwadi Tal South Solapur Dist Solapur. Submission Date for this Tender is 20-10-2021. Building Work Tenders in GP PINJARWADI TALUKA SOUTH SOLAPUR Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soil of all types, sand, graval andsoft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreding as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( LIFT UP TO 1.5 M.)SSRI no 21.02Spec. No. Bd A1 P.No. 259 |
| 2 | Excavation for foundation in hard murum including removing the excavated materials upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling,ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m)By Manual Means |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 4 | Providing and laying in situ cement concrete M-20 of trap/granite/ quartzite for R C C work in foundation like raft,strip foundation,grillage and footings of R C C columns and steel stanchions including bailing out water, formwork ,compaction curing and roughening the surface if special finish is to be provided( Exculding reinforcement and structural steel) comp. without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sand SSR I no25.11, Spec. Bd F3P.No. 298 & B-7,P.No.38 |
| 5 | Providing and casting in situ cement concrete M-20 of trap/granite /quartzite/ gneiss metal for R.C.C.columns as per detailed drawings and designs, or as directed including , centering, formwork, compactionandroughening if special finish is to be providing and curing ( Excluding reinforcement ) complete. without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sand SSR I no25.31,Spec. No. Bd F5P.No.300 & B-7,P.No.38 |
| 6 | Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C.beams and lintelsas per detaileddesigns and drawingor as directed including, centering, form work, compaction androugheningthe surface if special finish is to be provided and curing complete. (Excluding reinforcement) .without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sandSSR I no 25.50,Sp.No.Bd-F-6,P.No.300 & B-7,P.No.38 |
| 7 | Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. chajja including centering, formwork,compaction and roughening the surface if special finish is to be provided and curing complete.( Excluding reinforcement ). without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sand SSR P.No.I No26.05 ,Spec. No. Bd F 9P.No. 303 & B-7,P.No.38 |
| 8 | Providing and casting in situ Cement Concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C.slabs and landings as per detailed designs and drawing or as directed including centering, formwork,compaction and roughening the surface if special finish is to be provided and curing complete. without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sand( Excluding reinforcement ). SSR I No 25.70,Spec. No. Bd F8P.No. 302 & B-7,P.No.38 |
| 9 | Providing and fixing in position TMT-FE-500 reinforcement of various diameters for R.C.C. pils caps,footings,foundations, slabs, beams, columns, canopies, staircase, neweis, chajjas , lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR I No26.33 ,Spec. No. Bd F17 / 306 |
| 10 | Providing Ilnd class Burnt Brick masonary with conventional type bricks in CM 1:6 in Plinthincluding striking joints, racking out joints ,watering and scaffolding compete. SSR I No27.01,Spec. No. Bd G1P.No. 313 |
| 11 | Providing Ilnd class Burnt Brick masonary with conventional type bricks in CM 1:6 in Superstructureincluding striking joints, racking out joints ,watering and scaffolding compete. SSR I No27.05 ,Spec. No. Bd G5P.No. 315 |
| 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.DSR P.No.254/27.06 Bd.G.7 Page No. 316 |
| 13 | Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete.DSR P.No. 201/21.36 |
| 14 | Filling in the Plinth and Floors with Contractors soil,sand or Murum in 15cm to 20cm layers including watering and compaction complete. DSR I.No. 21.37 , Spec. No. Bd A 11 P.No. 263 |
| 15 | Providing and fixingdouble leaf steel door without ventilator including shuter of m.s. frame of angle 50*50*6mm and shuter frame of m.s. angle of 30*30*6mm and shuter sheet of 10 guage of approved quality with hold fast, nesessary fixture and fastening with oil paint three coat including prime coat complete.as per detailed design and drawing. |
| 16 | Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating without ventilator including fabricating / glazing with plain obscured glass panels of approved type iron oxidised fixtures and fastening ,finishing with oil painting two coats complete ( with guard bars 12 mm square at 10 cm C/c) SSR I No 39.20 , Sp.No. Bd-T-53,P.No.509 |
| 17 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.DSR P.No. 331/39.68 Spec.No. :As directed by Engineer in charge. |
| 18 | Providing cement plaster 12mm thickin single coat in CM1:5 without neeru finish to concrete or brick srfaces in all positions including scafolding and curing etc. Complete.SSR I No32.03, Spec. No. Bd L 2P.No. 368 |
| 19 | Providing internalcement plaster 20mm thick in two coat in CM 1:5 without neeru finish,to concrete, or brick srfaces in all positions including scafolding and curing etc. complete. SSR I no32.08 Spec. P. No. Bd L 4 P.No. 368 |
| 20 | Providingneeru finishto Plastered surfacesin all positions including scafolding and curing etc. complete. ( Excluding ceiling ) SSR I no 32.15 Spec. No. Bd L 10 /370 |
| 21 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. DSR P.No. 276/33.24Spec. Bd.M 12 . P.No. 385 |
| 22 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 23 | Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish |
| 24 | Providing and fixing Orissa type white glazed earthen wear 580mm water closet pan including "S" trap with earthenware foot rest cast iron soil and vent pipe upto outside face of wall 1:2:4 brick bat lime bedding without flushing tank and its accessariesetc. complete.DSR P.No.355/42.30 Spec : As directed by Engineer In Charge |
| 25 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacitybetween 200 to 1000 liters DSR P.No.358/42.53Spec. No.: As directed by Engineer in charge |
| 26 | Providing and fixing 10cm. C. i. nahani trap including c. i. gating bend and piece of c.i. pipe upto outside face of wall complete.DSR P.No.350/41.80 Spec. No. Bd V-32P.No.567 |
| 27 | Providing and fixig 15mm dia. Screw down bib stop tap of brass including necessary socket union nut complete DSR P.No.345/41.40 Spec. No. Bd V-8P.No.554 |
| 28 | Providing and fixing 100 mm dia. Stabiliser pipe / P.V.C. soil vent. / West pipe and with necessary fixtue and fastening such as bend tees single junction slotted vent clamp etc. complete. |
| 29 | BASIC TEST OF BRICKS - Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). |
| 30 | Test of Concrete - Compressive Strength OF C.C. Cube (Set of 3 cubes). |
| 31 | Test of8mm to 16mm steel ( set of 3 bars) etc.DSR P.NO-591/77 |
| 32 | Royalti Charges for Sand. |
| 33 | Royalti Charges for Metal, Rubble & Murum etc. |
| 34 | GST Charges |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
