Military Engineer Services-MES has published 8261-Spl Repairs/ Replacement Of Ber Ceiling Fans, Exhaust Fans And Geysers And Voltage Stablizers At Army Camp Pallavaram,Provn Of Smart Control System To Existing Street Light /Security Light And Provn Of High Mast Light In Various Locations At Ota Spl . Submission Date for this Tender is 13-11-2021. Street Lighting Tenders in St Thomas Mount Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Oct-2021 | BOQ Corrigendum-25-10-21 | BOQ | 06-11-2021 |
| 2 | 06-Nov-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-11-2021 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed. |
| 2 | Excavation in trenchesexceeding 1.5 m wide and exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of polesfor each additional 1.5m or part thereof in depth beyond the first 1.5 m etc all as specified and as directed. |
| 3 | Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as directed. |
| 4 | Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm each all as directed. |
| 5 | Supplying and laying burnt brick "B" class standard size for protection of cable as directed. |
| 6 | Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable all as directed. |
| 7 | Supply & Lay cable XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of following sizes all as specified and as directed. Note: i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. ii)Earth work such excavation, refilling, etc. shall be measured separately under relevant items. |
| 8 | 2 core 10 sqmm |
| 9 | 4 core 10 sqmm |
| 10 | 4 core 16 sqmm |
| 11 | 4 core 25 sqmm |
| 12 | 3.5 core 35 sqmm |
| 13 | Supply & Fixing1200 mm sweep AC ceiling fanHeavy duty decorative / energy saving model(BLDC) with double ball bearing, 230 volts, 3 blades with Canopy with suitable down road and all other accessories complete all as specified and as directed. Make:-Usha, model no-Energia 32 BLDC / HAVELLS model no-EFFICIENCIA NEO BLDC/Orient model no - Electric Aeroquiet |
| 14 | Supply and fixing of new METAL EXHAUST FAN 300mm sweep with fixing arrangements alongwith all accessories 230 V complete all as specified. Make : Havells model no- VENTIL AIR DB 300mm /Almonard model No- almonard black 300mm /Crompton model no- Drift Air 300mm. |
| 15 | Supply and fixing of Electric water storage heater 25 Ltrs, 230V AC with fixing arrangements alongwith all accessories complete all as specified. Make : Havells Model No Puro DX 25L /Racold/Bajaj. |
| 16 | Supply & Fix wall mounted voltage stablizer 0.5 KVA with copper winding, digital voltmeter,working range 160v-280v. Make : V Guard or equivalent. |
| 17 | As per item No- 11 here in before but of capacity 5.0 KVA. |
| 18 | S&F of tubes light grade of size 40 mm dia galvanised with all fittings and fixed complete to walls and ceiling or laid in treanches, fixed on pole /under road crossing or passing through gutters etc including necessary road cutting and making good with PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) complete, including taking down old u/s GI tubing all as specified and as directed. Make : TATA/JINDAL/Prakash Surya |
| 19 | Supply ,Installation , testing and commissioning of HIGH MAST SYSTEM Make :Bajaj Electricals Ltd/CG/Havells under the following Specifications : - Height of mast: 11.0 Meter, No. of sections : Two, Material construction :S 355 grade as per BS-EN10 025,Base dia. and top diameter (A/F): Top 150 mm, Bottom 360mm, Plate thickness : Top : 3 mm, Bottom 3 mm,Cross section of Mast : 20 side polygon, Standard for of galvanisation :As per BS EN ISO 1461,Size of opening and door at base : 1050 x 225 mm, Diameter of base plate : 520 mm,Thickness of base plate : 25 mm,Lightning protection finial : G.I single spike of length 1200 mm,Max.wind speed : 55m/s as per IS : 875 (Part - III),Number of foundation bolts : 04 nos,PCD of foundation bolts : 445 mm,Type / diameter / length of foundation bolts : TS 600 / 24 mm dia / 850 mm long.LUMINAIRES CARRIAGE |
| 20 | SUPPLY PART: (i) Supply of 11.0 M high mast shaft in two sections suitable for 50 m/sec wind speed, with head frame, winch mounting bracket, luminaries carriage suitable to install 12 nos luminaries in symmetrical arrangement. -01 No Make: Philips/Crompton Greaves/Bajaj (ii) Supply of raising lowering system comprising double drum winch,5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial.(Wiring material from JB to individual luminaire & MCB in base compartment are not included and are a part of installation)-01 No (iii) Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template.-1 set Make: Crompton / Bajaj / Philips/ Halonix (iv) Supply of 150W LED Flood light-06Nos (v) Supply of LED type single dome aviation obstruction light.-01 No (vi) Supply of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP -contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals.-01 No (vii) Construction of shallow foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour.- 1 Job (viii) Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour.-1 Job (ix) Provision of GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour. (2nos per mast required)-2 Nos (x) Installation of the mast feeder pillar by grouting the stand in concrete.-1 No Note:- The above quoted rates are included the rate of Excavation , returining and removal incl concreate etc as per recommendation of Manufacturer. No separate payment will be claimed for the same. |
| 21 | Supply and fix pole mounted Sheet Moulded Compound(SMC) Box weather proof type with hinged type door off white color of size 240x130x110 mm comprising of 1 No MCB 6A and 1 No neutral link complete fixed on pole/Pillar/wall with suitable size clamps, bolts and nuts etc all as specified and as directed. Make: Sintex/Hensel |
| 22 | S&F LED Floodlight fittings 120watts 6000K new generation energy saving &environment friendly long life versatile pressure die cast aluminium IP 66 roadway luminaire with high power LED as light source and electronic driver electric operated AC single phase 240 volts with all accessories and including necessary electrical connectionwith 1 mtr long GI pipe of 40mm with suitable size MS angle iron bracket including nuts, Bolts & washers etc for fixing of LED Flood Light complete all as specified and as directed.Make:- Bajaj :BJFL 120W LED I / Havells:JETAIRISFLS 120W 757SYMLTG/ Halonix Cat No:HLSLD-C10-120-CW-I |
| 23 | S & F Lamp holder insulated body with back plate for pendant/batten fittingsall as directed. |
| 24 | S&F of 12W LED lamp with 1000 lumens. The lamp shall be with B22 base cap. The starting shall be less than 0.5s. The power factor shall be .94 complete all as specified. Make: Havells/ Philips/ CG/ Luker |
| 25 | Material and labour for cement concrete 1:2:4 with 20mm aggregate for foundation of Bollard/Flood light fitting including necessary foam work complete. |
| 26 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty PVC Insulated and FR PVC Round sheathed copper conductor (flexible) 3 core 1.5 Sqmm served with an inner sheathing of sheathed nominal cross section including suitable PVC conduit, clamp and all necessary arrangementsall as specified and as directed by Engr-in -Charge. |
| 27 | Material & Labour for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel strip 25X4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed. |
| 28 | Supply, Test, Install and Commissioning of 3 Phase, 40A Smart Control Panelhaving enclosure made of SMC housing , IP 65 and with lock arrangement. It should have SMA GSM Antenna and should be suitable to communicate via GSM/GPRS communication.It shall consist of RTU, Cluster Energy Meter, Relay Controller Unit along with MCB and changeover/Bypass arrangement and suitable for operating at 180-270V AC. It should have Change over Circuit for maintenance and manual operation. Door open detection provision, even in case of power failure.It shall provide 40KV TPN SPD on-line for Lights & RT unit.There shall be a metering unit that shall support three phase energymeasurement (IS:13779 compliant)along with Built in Voltage and Current measurement sensor for connected load.Energy meter should have wired connectivity with RTU on RS232.Energy meter should support measurement voltage, current, active power,apparent power, cumulative KWh, cumulative KVAh, power failure ON/OFF events, PF, frequency,Relay ON/OFF events.It should record Over voltage/ phase, Over current / Phase, undervoltage/ phase, Overload/ Phase, Panel door open. Threshold values can be configured through software.RTU should be able to have bidirectional communication using GPRS communication with the web application software over GSM / GPRS. Relay controller shall switch ON/OFF lamp remotely/ as per predefined schedule/astroclock based.It should be complete with all required switching and protecting devices, contactors, relays, sensors, controller, remote wireless communication devices, wiring, pipe earthing, surge protection device, required software, web server, hosting, etc.,complete all as specified and as directed by the Engr-in-Charge (Approved Make: Bajaj, Philips) |
| 29 | Supply, Test, Install and Commissioning of Scalable ,Standalone web application services associate with Smart Control Panel with proper resolution, accessible from any computer on the network through any standard web browsers.It should typically support/provide details of electrical parameters of the feeder / metering unit voltage, current, KWH,Status of lights downside the feeder / metering unit – alerts / notification icons,Button to do an “On demand” ON / OFF of group of lights below the feeder / metering unit.It shall enable receipt & storage of all the field data with a time stamp in Cloud local server. It should support a comprehensive dashboard which can give a quick view of real time status of switching point of an area / feeder / luminaire as an MIS as well as on a GIS based platform. It should register all fault conditions like excess voltage/current drawn, group of lamps failure, no-power supply, network down failure, switching point failure, contactor failure etc through the instantaneous alert Alarms/ alerts messages (SMS) sent to configured phone numbers. It shall enable user to generate reports of system parameters based on historical data on daily, monthly, yearly basis in excel or graphical format.It should facilitate Roles and Permissions requirements at different level of user hierarchy.The System should be suitable for third party integration if required. Lifecycle services package(including cloud services,data charges for 5 years per panel) complete all as specified and as directed by the Engr-in-Charge (Approved Make: Bajaj, Philips) |
| 30 | Supply and Fixing Steel tubular swaged pole erected to truly vertical or planted as strut complete with 6 mm thick MS Base plate,welded to pole,finial taper cap,bolts,nuts,screws , 8.5 Mtr long, type 410 SP -22,including drilling of holes of required size for fixing of cross arms,painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint on the portion embedded in concrete, and marking pole no. with black paint at suitable heightall as specified and directed by Engineer-in-Charge. |
| 31 | M & L for Plain cement concrete 1:2:4 type B0using 12.5mm graded aggregate for coping to pole foundation including necessary form work with fair finished surface all as directed. |
| 32 | M & L for Plain Cement concrete 1 : 4 : 8 type C1 using 20 mm graded stone aggregate for pole foundation, filling and mass concrete all as specified. |
| 33 | Supply Fabricate, install, connect, test and commission LT electrical Feeder Piller panel board, AC, 3 phase, 4 wire, 415 / 500 V, 50 Hz, outdoor weather proof type, fabricated with 3.00 mm thick mild steel and suitable sized pressed steel frame work, top with sloping canopy, bottom with detachable plates,front and rear with hinged type door and locking arrangements, chamber for cable entry and exit, chamber for aluminium bus bars including aluminium bus bars of suitable capacity as per IS specification insulated with coloured PVC sleeves mounted on suitable insulators and separators, holes drilled for connections, chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated, complete mounted on PCC pillars including painting of panel board with two coats of synthetic enamel paint over one coat of red oxide primer and Existing cable of any size / typeto be connected withproper termination complete all as specified and comprising of the followings:- INCOMING :- (a) MCCB 4 Pole, 415 V, Thermal Magnetic type, 100 Amps with breaking capacity 16 KA Make: Standerd /Siemens / Legrand/Schneider- 01 No. OUTGOING :- (b)MCB TPNC Curve 63Amps -02Nos (c)MCB TPNC Curve 40Amps -04Nos (d)Multi function Meterwith CT & PTs-01 No (e) Phase indication lamps - 3 Nos. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
