Madurai Corporation has published Construction Of Compound Wall And Maintenance Works For Cattle Pound Dog Shelter Avaniyapuram Vellakkal In Ward No 94. Construction Of Compound Wall And Maintenance Works For Cattle Pound Dog Shelter Avaniyapuram Vellakkal In Ward No 94.. Submission Date for this Tender is 21-10-2021. Wall construction Tenders in mdu Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Picking the existing cement plaster surface the chipping materials clearing away from the site and cleaning etc., complete |
| 2 | Charges for Putting borehole of size 23 / 30 cm dia for file foundation in Sandy and Other loose soil by using hand Boxing set Rate Shall be include the cost of Labour for Boxing Fule Charges for Auger Bore and Other T & P Employed etc., complete |
| 3 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 4 | Supplying and filling in foundation andbasement with filling Quarry Dust in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. |
| 5 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 6 | Supplying,erectingSTEEL CENTERING forsides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid ( RCC column footing plinth, beam and lintel sides ) |
| 7 | Supplying,erectingwith necessarysupports for plain surface such as RCC Boxing side slab and silmilar RCC slab with all cross bracing etc., complete in all floors of any height ( the retrived materials ) should be taken back by the contractor the payment for cenetering shall be given after the concrete is laid ( For Rectangular or Square Columns ) |
| 8 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCCitemsof works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and alsoincluding fixingfan clamps and fixtures in rccworkswherever necessary as directed by departmentalofficer etc., complete. For Ground Floor |
| 9 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 10 | Brick work in CM 1:5 (one cement & five sand) using III class country bricks of size 83/4"X41/4"X 21/4" including finishing, curing, etc., complete complying with standard specification - 100CFT For Ground Floor |
| 11 | Suplying fabricating erecting of ornamental grill work ( for required Size 2.30 X 0.60 cm ) for compound top welded type using MS channel angle flat and squire bars etc., conforming to IS specification including primer coating and enamal painting as per design given by the departmental officers etc., complete as per STD Specification |
| 12 | Plastering with cement mortar (1:3) 12mm thick in all floors including cost and conveyance of all materials to site and labour charges etc., complete complying with standard specifications. |
| 13 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 14 | Fabricating, Supplying and fixing MS angle Posts for barbed wire fencing of 50mm x 50mm x 6mm MS "L" angle for Vertical Portion (60cm Height) and Bottom inside the wall 30cm grinding and smoothing the entire welded portion conveyingthe finished materials to the work site and fixing them in position with requiredclamps, bolt and nuts including all materials and Labour and Transportation and welding charges and Including two coats of Approved enamels paint over one coat of red oxide and including cost of stell and binding wire and laying as Per Departmental Officers etc., Complete |
| 15 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colourfor PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) SD -20 |
| 16 | Supply and fixing of single box type (philips / Havells / Eq) suitable for 4 feet 20W LED tube light with TW round blocks on wall or ceiling with 20W LED tube light with PVC unsheathed Copper leads from terminals to the fitting |
| 17 | Supply and fixing of 48W LED Street Light Fitting LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE)Higher End Philips / Havells / Equivalent etc., complete |
| 18 | Supplying and fixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962. |
| 19 | Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thickPLB board and 5.5 mm thickglazeddoor using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to theextentrequiredand madegood to theoriginalconditionsafterfixingetc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections. |
| 20 | Labour charges for over head wiring from EB pole to pump room by fixing 32mm dia GI pipeto the required height over roof slap of pump room ads directed by EB authorities including fixing copper wire infour layers and inslulated with proper reels wire required MS clampset supp delivery and fixing of all materials such as bore well cover clamp set U kondi 7/20GI wire insulated reels 24 18 TW meter board 10x4 aorial board PVC Tape roll copperd earth plate GI bolt and nut with washer nutral linkPVC insulted copper wire (7/20 wire up to 10 HPm 7/16 wire above 10hp)1”PVC hose pipe 1” PVC clamp 25mm PVC encacing pipe 332AMPS fuse carroar 6no 10HP and 60 amps fuse carrier. |
| 21 | PaintingNew wall surface with TwocoatofPlastic Emulsionpaint ofapproved quality including cleaning of plaster surface with soap soda and water by manual labour. |
| 22 | Paintingold wall surface with TwocoatofPlastic Emulsionpaint ofapproved quality including cleaning of plaster surface with soap soda and water by manual labour. |
| 23 | Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 24 | Painting two coats with Ready Mixed Enamel Paint over the Old Iron works of approved quality and colour without priming coatincluding the cost all materials etc., complete, in all floors. |
| 25 | Manufacturing Supply and Fixing of Retro Reflective Road Name sign board Double arrow big size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010 & type XI standards of ASTM D 4956-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cmX30cmX45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as per IRC 67-201 Guidelines , 7years pre qualification warrenty for Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro Reflective type XI. The Retro Reflective sheeting should have manufactures WATERMARK on the sheeting surface for identification. Double Arrow Big Size 36"X 48" |
| 26 | Add GST 12% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
