Bids Are Invited For Tibia Nail8 X 34 Mm, - 14* High Herzog Bend , Guide Wire Hole At Band , Distal Three Proximal 2 Hole , Proximal Diameter Of 12 Mm , Dynamic Hole Of 10Mm, Distel Hole Spacing 11Mm. Dealer Must Be Iso Certified ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Tibia Nail8 X 36 Mm - 14* High Herzog Bend , Guide Wire Hole At Band , Distal Three Proximal 2 Hole , Proximal Diameter Of 12 Mm , Dynamic Hole Of 10Mm, Distel Hole Spacing 11Mm. Dealer Must Be Iso Certified ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Tibia Nail8 X 38 Mm - 14* High Herzog Bend , Guide Wire Hole At Band , Distal Three Proximal 2 Hole , Proximal Diameter Of 12 Mm , Dynamic Hole Of 10Mm, Distel Hole Spacing 11Mm. Dealer Must Be Iso Certified ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Tibia Nail10 X 34 Mm - 14* High Herzog Bend , Guide Wire Hole At Band , Distal Three Proximal 2 Hole , Proximal Diameter Of 12 Mm , Dynamic Hole Of 10Mm, Distel Hole Spacing 11Mm. Dealer Must Be Iso Certified ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Tibia Nail10 X 36 Mm - 14* High Herzog Bend , Guide Wire Hole At Band , Distal Three Proximal 2 Hole , Proximal Diameter Of 12 Mm , Dynamic Hole Of 10Mm, Distel Hole Spacing 11Mm. Dealer Must Be Iso Certified ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 8 X 285 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 8 X 300 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 8 X 315 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 8 X 330 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 8 X 345 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 8 X 360 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 9 X 285 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 9 X 300 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 9 X 315 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 9 X 330 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 9 X 345 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 9 X 360 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 9 X 380 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 10 X 285 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 10 X 300 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 10 X 315 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 10 X 330 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 10 X 345 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 10 X 360 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Expert Tibia Nail 10 X 380 Mm - Anatomic Bend Curvature , Must Have Different Locking Options, At Distale End Two Ml & 1 Ap And One Is Oblique Hole , Nail Must Have Two Ml Locking At Proximal Which Enable Primary Compresson Or Secondary Controlled Dynamisation , Dynamic Hole Of 10 Mm. Also Having Three Proximal Locking Options In 45* Conversing And One Ap Oblique Hole No Herzog And Design.Dealer Must Be Iso Certified, Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Femur Nail 9 X 38 Mm - Femur Nail Must Accept 4.9 Mm Lb As Well As 5 Mm Locking Screw, 3 / 8 Unf , Nail Must Permit 5 Mm Controlled Axial Dynamization , Nail Is Bent At 1.5 M Radius Of Curvature With Dynamic Hole & Four Locking Options.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Femur Nail 9 X 40 Mm - Femur Nail Must Accept 4.9 Mm Lb As Well As 5 Mm Locking Screw, 3 / 8 Unf , Nail Must Permit 5 Mm Controlled Axial Dynamization , Nail Is Bent At 1.5 M Radius Of Curvature With Dynamic Hole & Four Locking Options.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Femur Nail 9 X 42 Mm - Femur Nail Must Accept 4.9 Mm Lb As Well As 5 Mm Locking Screw, 3 / 8 Unf , Nail Must Permit 5 Mm Controlled Axial Dynamization , Nail Is Bent At 1.5 M Radius Of Curvature With Dynamic Hole & Four Locking Options.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Femur Nail 10 X 40 Mm - Femur Nail Must Accept 4.9 Mm Lb As Well As 5 Mm Locking Screw, 3 / 8 Unf , Nail Must Permit 5 Mm Controlled Axial Dynamization , Nail Is Bent At 1.5 M Radius Of Curvature With Dynamic Hole & Four Locking Options.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Femur Nail 11 X 38 Mm - Femur Nail Must Accept 4.9 Mm Lb As Well As 5 Mm Locking Screw, 3 / 8 Unf , Nail Must Permit 5 Mm Controlled Axial Dynamization , Nail Is Bent At 1.5 M Radius Of Curvature With Dynamic Hole & Four Locking Options.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Vollar Plate 3 Hole - 3.5 Mm Design In Which Combi Hole In Shaft For Dynamic Compression And Locking Screws That Provide Angular Stability Of Fixed Anatomic Angle , Plate Should Have 3 Screw Option In Head , Should Have 3 K Wire Hole And Shaft Design Should Be 1 / 3 Tubular Type.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Vollar Plate 4 Hole - 3.5 Mm Design In Which Combi Hole In Shaft For Dynamic Compression And Locking Screws That Provide Angular Stability Of Fixed Anatomic Angle , Plate Should Have 3 Screw Option In Head , Should Have 3 K Wire Hole And Shaft Design Should Be 1 / 3 Tubular Type.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Vollar Plate 5 Hole - 3.5 Mm Design In Which Combi Hole In Shaft For Dynamic Compression And Locking Screws That Provide Angular Stability Of Fixed Anatomic Angle , Plate Should Have 3 Screw Option In Head , Should Have 3 K Wire Hole And Shaft Design Should Be 1 / 3 Tubular Type.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Clavicle Plate 8 Hole Right - Superior Anterior Clavicle Plate, Anatomical Precontoured, Angularly Stable Should Have Tapered Plate Tip That Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior & Anterior Twist Both End K Wire Holes. Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Right 3 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Right 4 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Right 5 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Right 6 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Right 7 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Right 8 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Left 3 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Left 4 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Left 5 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Left 6 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Left 7 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , Superior Anterior Clavicle Plates, With Lateral Extension Left 8 Hole - Superior Anterior Clavicle Plates, With Lateral Extension Anatomical Precontoured, Angularly Stable Should Have Tapered Plate, Tip Can Be Inserted Percutaneously, Allow Contouring , Twisted Design Should Combine Advantages Of Superior And Antero-Inferior Plating. 2.7 Mm Locking Should Have Different Angle Of Locking Screw Holes. Temporary K Wire Fixation Holes Should Be There.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , 3.5 Mm L C -Dcp Plate 6 Hole - Low Contact Dynamic Compression Plate To Eliminate Reduced Impairment Of Periosteal Blood Flow To Avoid Shear Force Which Will Lead To Loss Of Reduction.Tapered Tip End On Both Side With K Wire Holes At Both Ends, Opposite Direction Holes From The Centre.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , 3.5 Mm L C -Dcp Plate 7 Hole - Low Contact Dynamic Compression Plate To Eliminate Reduced Impairment Of Periosteal Blood Flow To Avoid Shear Force Which Will Lead To Loss Of Reduction.Tapered Tip End On Both Side With K Wire Holes At Both Ends, Opposite Direction Holes From The Centre.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , 3.5 Mm L C -Dcp Plate 8 Hole - Low Contact Dynamic Compression Plate To Eliminate Reduced Impairment Of Periosteal Blood Flow To Avoid Shear Force Which Will Lead To Loss Of Reduction.Tapered Tip End On Both Side With K Wire Holes At Both Ends, Opposite Direction Holes From The Centre.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) , 3.5 Mm L C -Dcp Plate 9 Hole - Low Contact Dynamic Compression Plate To Eliminate Reduced Impairment Of Periosteal Blood Flow To Avoid Shear Force Which Will Lead To Loss Of Reduction.Tapered Tip End On Both Side With K Wire Holes At Both Ends, Opposite Direction Holes From The Centre.Dealer Must Be Iso Certified. ( Productmust Be Certified Ufda , Ce, Iso, Iec, Zed Certificate Gold ) Total Quantity : 1
