Delhi Development Authority-DDA has published Conversion Of Press Building Into Record Room Of Dda At Vikas Sadan Providing And Installation Of High Rise Heavy Duty File Storage System Compactor In Press Building Vikas Sadan Ina Specialized. Submission Date for this Tender is 20-10-2021. Shelving and Storage Tenders in Vikas Sadan INA New Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing, Fixing & Installation of High Rise Heavy Duty Storage System with inbuilt walkway surface along with staircase and hand rail made out of Prime quality CRCA Sheets(thickness not less than 0.8 mm) confirming to IS 513 Grade ‘D’ in accordance with particular specifications. All steel components of Superstructure including upright shall be treated with eight stage, anti rust treatment vide particular specifications and shall be finished within controlled temperature of180 Degree C to 200 Degree C for scratch resistant, uniform and lasting of approved shade finish and colour as per direction of Engineer in Charge, including powder coated based trolley as per particular specification made out ofH.R. Sheet of (thickness not less than 3 mm) and mounted on anti friction bearings including drive mechanism with chain, hand wheel, sprockets, shafts shelf lubricating bearings, rails, traveling wheels, guide channels, holding down bolts, anti tilt and anti roll mechanism (wherever necessary) with duly powder coated after antirust treatment with each shelve in every cabinet (bay) as per. Cover panel of 0.8 mm thick C.R.C.A. sheet to total height and having width covering the drive chain of the compactor of the module, this attachment / system also include the cost of arrangement for providing shelves and including 9 adjustable shelves with in-built provision of walkway surface including index plate of acrylic sheet as per particular specification, all fasteners, fittings, centralized and manual locking safety provision etc. complete as per the direction of Engineer in charge. |
2 | Providing, Fixing & Installation of High Rise Heavy Duty Double Face Movable Unit of storage system body size 2360 mm (length, outer compactor body) x 4235 mm (height, measured from bottom of undercarriage to top of the compactor unit) x 900 mm (width, outer) in one bay only with 60 mm projected drive cover to full height of compactor module as per specifications. Each bay having 9 adjustable shelves with in-built provision of walkway surface making 10 compartments including the cost of supporting clips, brackets etc, which facilitate adjustment of shelf in upright up to a pitch of 25 mm approximately for proper positioning of shelves through out the height to suit the desired height for fixing shelves.The system also includes the cost of fixing base to the floor to make the unit perfectly rigid and static by using adequate number of expansion bolts (dash fasteners) etc. complete. |
3 | Providing, Fixing & Installation of High Rise Heavy Duty Single Face Movable Unit of Compactor body size 2360 mm (length, outer compactor body) x 4235 mm (height, measured from bottom of undercarriage to top of the compactor unit) x 475 mm (width, outer) in one bay only with 60 mm projected drive cover to full height of compactor module as per specifications. Each bay having 9 adjustable shelves with in-built provision of walkway surface making 10 compartments including the cost of supporting clips, brackets etc, which facilitate adjustment of shelf in upright up to a pitch of 25 mm approximately for proper positioning of shelves throughout the height to suit the desired height for fixing shelves.The system also includes the cost of fixing base to the floor to make the unit perfectly rigid and static by using adequate number of expansion bolts (dash fasteners) etc. complete. |
4 | Providing, Fixing & Installation of High Rise Heavy Duty Single Face Static Unit of Compactor body size 2360 mm (length, outer compactor body) x 4235 mm (height, measured from bottom of undercarriage to top of the compactor unit) x 475 mm (width, outer) in one bay only with 60 mm projected drive cover to full height of compactor module as per specifications. Each bay having 9 adjustable shelves with in-built provision of walkway surface making 10 compartments including the cost of supporting clips, brackets etc, which facilitate adjustment of shelf in upright up to a pitch of 25 mm approximately for proper positioning of shelves throughout the height to suit the desired height for fixing shelves.The system also includes the cost of fixing base to the floor to make the unit perfectly rigid and static by using adequate number of expansion bolts (dash fasteners) etc. complete. |
5 | Providing, Fixing & Installation of High Rise Heavy Duty Double Face Static Unit of Compactor body size 2360 mm (length, outer compactor body) x 4235 mm (height, measured from bottom of undercarriage to top of the compactor unit) x 900 mm (width, outer) in one bay only with 60 mm projected drive cover to full height of compactor module as per specifications. Each bay having 9 adjustable shelves with in-built provision of walkway surface making 10 compartments including the cost of supporting clips, brackets etc, which facilitate adjustment of shelf in upright up to a pitch of 25 mm approximately for proper positioning of shelves throughout the height to suit the desired height for fixing shelves.The system also includes the cost of fixing base to the floor to make the unit perfectly rigid and static by using adequate number of expansion bolts (dash fasteners) etc. complete. |
6 | Providing, Fixing & Installation of walkway comprising of staircase, walkway panels, walkway support channel with sliding bearing and handrails. |
7 | Providing, Fixing & Installation of an independent staircase, inbuilt with walkway assembly for reaching to upper tier from lower tier. The structure has min. stair width of 900 mm and landing platform at approx. height of 2300 mm. The steps of staircase made of embossed grating panel of 200 mm W x 40 mm H x 1.5 mm thk. Roll formed profile designed to carry mentioned loads and man movement. The stairs will be provided with minimum 2 hand rails on either side. The top hand rail will be at 1000 mm and the second rail to be kept at 500 mm. Diameter of pipe will be 38 mm. |
8 | Providing, Fixing & Installation of Hand Rail along the walkway surface and end of working aisle for safe movement of operating personnel. Total three rows of hand rails willbe provided with equivalent spacing up to 1200 mm height with pipe diameter of 38 mm. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail