Tripura Industrial Development Corporation Limited-TIDCL has published Maintenance Of Industrial Training Institute (Iti At Dhajanagar Udaipur Gomuti District Sh Administrative Building Hostel Building Etc Maintenance Of Industrial Training Institute (Iti At Dhajanagar Udaipur Gomuti District Sh Administrative Building Hoste. Submission Date for this Tender is 06-11-2021. Building Work Tenders in Dhajanagar Udaipur Gomuti District Tripura. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 05-Nov-2021 | RE ISSUE OF BID DOCUMENT | Technical Bid | 06-11-2021 |
Sl. No. | Item Description |
1 | SH: ADMINISTRATIVE BUILDING. |
2 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc. complete as per direction of the Engineer- in-charge. |
3 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:- i) With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
4 | 12 mm cement plaster of mix. i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
5 | 6 mm cement plasterof mix. i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
6 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. i)40mm Thick with 20 mm stone aggregate. |
7 | First class brick work in foundation and plinth including cost of all materials as required complete:- i) In cement mortar 1:6 ( 1 cement : 6 fine sand ). |
8 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
9 | Neat Cement Punning |
10 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
11 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – - All work upto plinth level. I) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size). |
12 | Removing White / colour wash by steel wire brushing, scrapping and sand papering and preparing the surface smooth including repairs to scratches etc. as required complete. |
13 | Renewing glass panes with putty and nails wherever necessary, including racking out the old putty. i) FloatGlass panes of thickness 4 mm |
14 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
15 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. |
16 | Painting on wood work with oil type wood preservative ( one or more coats ) of approved brand and manufacture on old work including preparation of surface as required complete as per direction of the Engineer in charge. |
17 | Painting with aluminium paint ( one or more coats )of approved brand and manufacture on old work to give an even shadeincluding preparation of surface etc as required complete as per direction of the Engineer in charge. i) on steel work. |
18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : i) Karai wood |
19 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. i) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
20 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622-2017, of approved make, in all colours and shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3(1cement:3 fine sand) jointing with grey cement slurry @3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. I) Double charged stainless vitrified tiles I) Size of tile 60x60 cm |
21 | Providing and fixing precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, landings, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete i) In light shade using white cement |
22 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : i) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
23 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern. |
24 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : i) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps |
25 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
26 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : i) Rectangular shape 453x357mm |
27 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mmgapforthermalexpansion i) Single socketed pipe - 110 mm OD |
28 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermalexpansion: |
29 | i) Coupler - 75 mm |
30 | ii) Coupler - 110mm |
31 | iii) Single equal tee without door - 110x110x110 mm |
32 | iv) Bend 87.5° -110mm |
33 | Providing and fixing PTMT pillar cock of approved quality and colour 15mm nominal bore, 107mm long, weighing not less than 110 grams. |
34 | Providing and fixing PTMT bib cock of approved quality and colour.I)15 mm nominal bore 86mm long, weight not less than 88gms |
35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. - Internal work -Exposed on wall |
36 | i) 15 mm nominal outer dia .Pipes |
37 | ii) 25 mm nominal outer dia .Pipes |
38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge - External work |
39 | i) 25 mm nominal outer dia .Pipes |
40 | ii) 32 mm nominal outer dia .Pipes |
41 | Providing and fixing G.I. pipes of medim class as per IS:1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. Complete as per CPWD specification and direction of the Engineer in Charge. - Internal work -Exposed on wall |
42 | i) 15 mm nominal outer dia .Pipes |
43 | ii) 25 mm nominal outer dia .Pipes |
44 | Providing and fixing G.I. pipes of medim class as per IS: 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. Complete as per CPWD specification and direction of the Engineer in Charge. - External Work. |
45 | i) 25 mm nominal outer dia .Pipes |
46 | ii) 32 mm nominal outer dia .Pipes |
47 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers" specification and direction of Engineer-In-Charge. |
48 | 30mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC profile section of size 30mm x 60mm and wall thickness 2mm ± 0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75×220 mm mitred and welded at the corners. The styles of the shutter reinforced by inserting galvanised MS tube of size 25×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of "H" Section, a UPVC profile section of size 30×100 mm and 2 mm ± 0.2 mm wall thickness welded to the shutter style with a UPVC profile section single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness with 20 mm panel beading of suitable size/Glass (4 mm thick plain glass)/ louver section, louver frame of suitable size,complete as per manufacturer"s specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). |
49 | SH: HOSTEL BUILDING. |
50 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc. complete as per direction of the Engineer- in-charge. |
51 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:- i) With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
52 | 12 mm cement plaster of mix. i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
53 | 6 mm cement plasterof mix. i) In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
54 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. i)40mm Thick |
55 | First class brick work in foundation and plinth including cost of all materials as required complete:- i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
56 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
57 | Neat Cement Punning |
58 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
59 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering – All work upto plinth level. I) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size). |
60 | Removing White / colour wash by steel wire brushing, scrapping and sand papering and preparing the surface smooth including repairs to scratches etc. as required complete. |
61 | Renewing glass panes with putty and nails wherever necessary, including racking out the old putty. i) FloatGlass panes of 4 mm |
62 | Distempering with oil bound washable distemper of approved brand and manufacture and to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] i) New work(two or more coats) over and including water thinnable priming coat with cement primer. |
63 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on old work (One or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
64 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. |
65 | Finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] i)New work(two or more coats applied @1.43litre/10sqm over and including priming coat of exterior primer applied @2.20kg/10sqm) |
66 | Painting on wood work with oil type wood preservative ( one or more coats ) of approved brand and manufacture on old work including preparation of surface as required complete as per direction of the Engineer in charge. |
67 | Painting with epoxy paint ( one or more coats )of approved brand and manufacture at all locations prepared and applied as per manufactures specification on old workincluding preparation of surface etc as required complete as per direction of the Engineer in charge. i) on steel work. |
68 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : i) Karai wood |
69 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. i) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
70 | Providingandfixingaluminiumworkfordoors,windows,ventilators, stair railing including hand rail andpartitionswithextrudedbuiltupstandardtubularsections/ appropriateZsectionsandothersectionsofapprovedmake conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws orwithfixingclips,orwithexpansionholdfastenersincluding necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawingandthedirectionofEngineerincharge.(Glazingand paneling to be paid for separately) :- |
71 | (i) For fixed portion of approved quality: - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15. |
72 | (ii) For shutters/ sliding shutters of doors, windows & ventilatorsincluding providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality ( Fittings shall be paid for separately ):- - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
73 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): i)12mm thick |
74 | Providing and fixing precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, landings, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete i) In light shade using white cement |
75 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : i) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
76 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern. |
77 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : i) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps |
78 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
79 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : i) Rectangular shape 453x357mm |
80 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mmgapforthermalexpansion i) Single socketed pipe - 110 mm OD |
81 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermalexpansion: |
82 | i) Coupler - 75 mm |
83 | ii) Coupler - 110mm |
84 | iii) Single equal tee without door -110x110x110 mm |
85 | iv) Bend 87.5° -110mm |
86 | Providing and fixing PTMT pillar cock of approved quality and colour . 15mm nominal bore, 107mm long, weighing not less than 110 grams. |
87 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893115 mm nominal bore |
88 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. - Internal work -Exposed on wall |
89 | i) 15 mm nominal outer dia .Pipes |
90 | ii) 25 mm nominal outer dia .Pipes |
91 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge - External work |
92 | i) 25 mm nominal outer dia .Pipes |
93 | ii) 32 mm nominal outer dia .Pipes |
94 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work -Exposed on wall |
95 | i) 15 mm nominal outer dia .Pipes |
96 | ii) 25 mm nominal outer dia .Pipes |
97 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work |
98 | i) 25 mm nominal outer dia .Pipes |
99 | ii) 32 mm nominal outer dia .Pipes |
100 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of 65/100 mm size complete as per manufacturers" specification and direction of Engineer-In-Charge. |
101 | 30mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC profile section of size 30mm x 60mm and wall thickness 2mm ± 0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75×220 mm mitred and welded at the corners. The styles of the shutter reinforced by inserting galvanised MS tube of size 25×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of "H" Section, a UPVC profile section of size 30×100 mm and 2 mm ± 0.2 mm wall thickness welded to the shutter style with a UPVC profile section single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness with 20 mm panel beading of suitable size/Glass (4 mm thick plain glass)/ louver section, louver frame of suitable size,complete as per manufacturer"s specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail