}

Water Supply Scheme Under Jjm Of Sepahijala District / Sh Construction Of 1 No. 20, 000 Gallon Capacity Rcc Underground Reservoir With Pump House, Installation Of Pump-Motor, Laying Of Distribution Pipe Line At Gangarai Para Water Supply Scheme Under J, Jampuijala-Tripura

Public Works Department-PWD has published Water Supply Scheme Under Jjm Of Sepahijala District / Sh Construction Of 1 No. 20, 000 Gallon Capacity Rcc Underground Reservoir With Pump House, Installation Of Pump-Motor, Laying Of Distribution Pipe Line At Gangarai Para Water Supply Scheme Under J. Submission Date for this Tender is 01-11-2021. Reservoir Tenders in Jampuijala Tripura. Bidders can get complete Tender details and download the document.




Tender Notice

29530358
Water Supply Scheme Under Jjm Of Sepahijala District / Sh Construction Of 1 No. 20, 000 Gallon Capacity Rcc Underground Reservoir With Pump House, Installation Of Pump-Motor, Laying Of Distribution Pipe Line At Gangarai Para Water Supply Scheme Under J
Open Tender
Indian
Tripura
Jampuijala
01-11-2021

Tender Details

Water Supply Scheme Under Jjm Of Sepahijala District / Sh Construction Of 1 No. 20, 000 Gallon Capacity Rcc Underground Reservoir With Pump House, Installation Of Pump-Motor, Laying Of Distribution Pipe Line At Gangarai Para Water Supply Scheme Under Jjm Of Sepahijala District / Sh Construction Of 1 No. 20, 000 Gallon Capacity Rcc Underground Reservoir With Pump House, Installation Of Pump-Motor, Laying Of Distribution Pipe Line At Gangarai Para

Key Value

Document Fees
INR 1000 /-
EMD
INR 40510.0 /-
Tender Value
INR 40.50 Lakhs /-

BOQ Items

Name of Work:- Water supply Scheme under JJM of Sepahijala District. / SH:-Construction of 1 No 20,000 Gallon capacity RCC ground reservoir with pump house , Installation of pump - motor , laying of distribution pipe line at Gangarai Para under Killa Barma GP of Jampuijala R.D. Blockduring the year 2021-2022.
Sl. No. Item Description
1Under Ground Reservoir
2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) includingdisposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
3Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil.
4Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
5Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: i. 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
6Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- -All work upto plinth level:i. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
7Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-i. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) .
8Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- i. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
9Centering shuttering including struttings, propping etc. and removal of form work for:
10Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. using shuttering ply
11Suspended floors, roofs, landings, balconies and accessplatform with 12 mm thick shuttering ply
12Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply.
13Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
14Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
15Thermo-Mechanically Treated bars of grade Fe-500D or more
16First class brick work in foundation and plinth including cost of all materials as required complete:-i. In cement mortar 1:4 ( 1 cement : 4 fine sand ).
17First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- i. In cement mortar 1:4 ( 1 cement : 4 fine sand ).
18Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-i. In cement mortar 1:4 ( 1 cement : 4 fine sand ).
19Cement concrete flooring 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. i.40 mm thick with 20 mm nominal size stone aggregate
2012 mm cement plaster of mixi. Cement mortar 1:4 (1 cement : 4 fine sand)
2115 mm cement plaster on the rough side of single or half brick wall of mix:i. Cement mortar 1:4 (1 cement : 4 fine sand
22Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- i. Using M.S. angels 40x40x6 mm for diagonal braces. .
23Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. i.Hot finished welded type tubes
24Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. i.0.63mm thick with zinc coating not less than 275gm/m2
25Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] i. New work ( two or more coats applied @ 3.84 kg/10 sqm)
26Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : i) New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
27Neat cement Punning
28Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]:i. Two or more coats on new work
29Providing and placing of G.I. pipe over the pump house on top portion of the R.C.C. column as per specification and the direction of the Engineer-in-charge.i. 150 mm dia
30Excavating trenches of required width for pipes, cables etc. in/c excavation for sockets and dressing of sides, where requiredramming of bottom, depth up to 1500 mm ( Slope 1 in 200)in/c getting out the excavated soil andbackfilling of soil as required after laying of pipe line, in layer not exceeding 200mm in depth in/c consolidating each deposited layer by ramming, watering etc. and disposingof surplus excavated soil as directed with all required lead as per Chapter-2 of CPWD specification & direction of theEngineer-in-Charge.
31A).For UPVCpipes in new work a). in all kinds of soil. i) For Pipes not exceeding 90 mm dia.
32B).For UPVCpipes in new work a). in all kinds of soil i). For pipes exceeding 90mm dia but not exceeding 300mm dia.
33C).For GI/CI/DI pipes in new work a). in all kinds of soil i). For pipes exceeding 90mm dia but not exceeding 300mm dia.
34Charges for cutting D.I. pipe with steel saw by manual means as per CPWD specification nd direction of the Engineer-in-Charge. i).150mm dia
35Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
36i.150mm dia. (PN-1.6)
37ii.100mm dia. (PN-1.6)
38iii.80mm dia. (PN-1.6)
39Providing and fixing DI specials as perCPWD specification and direction of the Engineer - in - charge.
40A) DI all socketted bend 900 i.150 mm dia
41B) DI all socketted bend 450i. 150 mm dia
42C) DI all socketted bend 22.50 ii. 150 mm dia
43D) DI all socketted TEEi.150 X 150 X 150 mm dia
44E) DI Collar fiange sockettedi. 150 mm dia
45F) DI flanged socketted tail piece
46i. 100 mm dia
47ii. 80 mm dia
48iii. 150mm dia
49G) DI flanged spigotted tail piece
50i. 100 mm dia
51ii. 80 mm dia
52iii. 150mm dia
53Providing and laying S & S Centrifugally Cast ( Spun ) Ductile Iron Class K-7 Pipes conforming to IS : 8329 as per CPWD specification and direction of the Engineer - in - charge. i. 150 mm dia DI class K- 7 pipes.
54Charges for push-on ( Tyton ) joints to centrifugually ( Spun ) cast iron pipes or ductile iron pipes including testing of joints and includingthe cost of rubber gasket as per CPWD specification and direction of the Engineer - in - chargea)150mm dia.
55Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
56i. 90 mm dia
57ii. 110 mm dia
58iii. 140 mm dia
59Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per chapter 20 of CPWD specification and direction of the Engineer - in - charge.
60i. 90 mm dia
61ii. 110 mm dia
62iii. 140 mm dia
63Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS :14182 including testing of joints complete as pe CPWD specification and direction of the Engineer - in - charge.
64i. 90 x 90 mm dia
65ii. 110 x 110 mm dia
66iii. 140 x 140 mm dia
67Providing, fixing and laying fabricated UPVC straight reducer conforming to IS : 10124 ( Part 3 ) with solvent cement conforming to IS : 14182 including testing of joints complete as perCPWD specification and direction of the Engineer - in - charge.
68i. 110 x 90 mm dia
69ii. 140 x 110 mm dia
70iii. 140 x 90 mm dia
71Providing, fixing and laying flanged fabricated UPVC tailpiece with MS flange ( 8 mm thick ) conforming to IS : 10124 ( Part 6 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
72i. 90 mm dia
73ii. 110 mm dia
74iii. 140 mm dia
75Making road crossing by horizontal boring for smooth laying of UPVC / CI / DI / GI pipes etc. of required dia complete as per specification and the direction of the Engineer-in-charge. A. by manual means.
76Providing and fixing G.I. pipes medium class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as perCPWD specification and direction of the Engineer- in - charge. A) External works
77i. 15 mm dia. nominal bore
78ii. 40 mm dia. nominal bore
79iii. 50 mm dia. nominal bore
80Providing, fixing and laying rigid UPVC pipes conforming to IS :4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.A. Class - 3 ( working pressure 6.0 kg / cm2)
81i. 40 mm OD
82ii. 50 mm OD
83iii. 90 mm dia.
84iv. 110 mm dia
85v. 140 mm OD
86Providing and laying of flexible PVC pipe (Conforming to IS:7634) complete as per specification and direction of the Engineer-in-charge (cost of earth work and fittings will be paid separately). i. 15 mm dia.
87Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the Engineer-in-charge.
88Providing and fitting fixing ofpressure meter ( 0.0 - 14.0 Kg/sqcm.) as per relevant IS specification and the direction of the Engineer - in-charge.
89Providing earthing with perforated 40 mm dia G.I. pipe (Medium class) ( 12 mm dia perforation ) , laying of 4 mm dia GI wire from earth electrode to panel, including excavating hole of 600 mm dia and refilling with Salt and Charcoal / coke in alternate layers of 300 mm , as per standard specification and direction of the Engineer-in-charge.i. For 3-phase connection with 4.00 mtr. Long G.I. Pipe.
90Providing & fitting fixing of 5000 GPH x 76.00 mtr head water lubricated submersible pump of maximum 150 mm outer dia. With maximum 10(ten) stages coupled with required wet and non-over loading submersible motor suitable for 340-440 volts,3 phase, 50Hz , ac supply and star delta method of starting along with 70.00 mtr. PVC insulated 3 core flat copper cable of 4.0 sqmm conformingto relevant IS code for submersible motor with all necessary equipments and fittings as required with suction case, strainer coupling key, vertical non-return valve cum discharge case as per direction of Rngineer-in-charge.
91Providing and fitting, fixingsteel sheet enclosed switchfuse units (suitable for DIN fuse) triple pole with Neutral Link (TPN),415/500 Volt, L & T / Havell’s /BCH make etc. complete as per specification and direction of the Engineer-in-Charge. i.100 amps
92Providing and fitting, fixing of Fully Automatic Star Delta type Motor starter (3 ph 50 Hz, 415V, ) in steel Sheet Enclosures with contractors and Timer etc. complete suitable for submersible Pump L & T, BCH , ABB make as per specification and direction of the Engineer-in-Charge. i.35 HP/26 KW Relay range within 20-32 + 10%.
93Fabrication of column pipe including providing & fitting fixing of G.I. flange by cutting the GI pipe into 3.05 mtrs. Size and welding the same with GI flange as per specification anddirection of the Engineer-in-charge( G.I. pipe will be issued bythe Department at free of cost ). I ) For 80 mm dia G.I. pipe with 10 mm thick GI flange
94Providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with battenholder complete as per specification and direction of the Engineer-in charge
95Providing and fitting fixing Single phasing preventorselectable under voltage +selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L& T/BCH/HAVELS iemens etc. make complete as perspecification and direction of the Engineer-in-charge.
96Providing and fitting fixing of moving iron type, Range0-100/ 0-200 amps ,96mmX96mm size AC Amps meter direct reading type(L&T/AE make) with selector switch and CT coil as a electrical instrument of the panel board as per specification and direction of the Engineer-in-Charge.
97Providing and fitting fixing of moving iron type, Range 0-500 V, 96mmX96mm size AC Volt meter( L&T/ AE make) with selector switch as a electrical instrument of the panel board as per specification and direction of the Engineer-in-Charge.
98Providing and fitting fixing with PVC insulated single core Multi strand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. i. 16 sqmm
99Providing and fixing C.I. non-return valve of approved quality as per of CPWD specification and direction of the Engineer - in - charge. i).100mm nominal bore.
100Providing & fitting fixing of G.I. flange ( 10 mm wall thickness ) by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge. i. 100mm dia.
101Providing and fixing G.I. bend / elbow in the pipe line in/c testing of joints complete as per CPWD specification and direction the Engineer-in-charge.i) 15 mm Dia
102Providing and fixing G.I. union as per CPWD specification and direction of the Engineer-in-charge. i)15 mm Dia
103Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer-in-charge. i)15 mm Dia
104Providing and fitting fixing PVC / plastic bib cock conforming to IS : 9763 in hydrant points at different locationas per specification & direction of the Engineer-in-charge.(i) 15mm dia PVC/ Plastic bib cock
105Providing and fixing G.I. nipple of medium class as per CPWD Specification and direction of the Engineer-in-chargei) 15 mm dia 150 mm long
106Providing and fitting fixingbrass ferrule with C.I cover conformingto IS-2692 in/c boring and tapping the main as per CPWD specification and direction of the Engineer-in-charge. i)10mm nominal bore.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail