Assam Police Housing Corporation Ltd has published Renovation Of Existing Rcc 2 Storied Ps Building With Provision Of Reception And Conference Hall Etc. In Existing Ps Under At Karimganj P.S. In Karimganj District Moitri Scheme. Renovation Of Existing Rcc 2 Storied Ps Building With Provision Of Reception. Submission Date for this Tender is 26-10-2021. Building Work Tenders in Karimganj P.S. in Karimganj District Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. |
| 2 | Jungle clearence including uprooting ofvegitation, grass, brush-wood, saplingand trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm |
| 3 | Earth work in Excavation for foundation trenches of walls , Retaining walls, footing of column , steps, septic tank etc. including refilling(return filling) the quantity asnecessary after completion of work , breaking clods in return filling , dressing Watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Upto a depth of 2 mts. below the existing Ground Level(a) In ordinary Soil |
| 4 | (B) Extra over item no.1.1(A) above for each 1m depth or part thereof beyond the initial depth of 2m |
| 5 | Supplying and filling sand gravel in foundation trenches of column footings over slushy soil including local carriage of materials within 8 km pumping out of water, ramming etc. complete for strengthening the bearing capacity of the soil as directed and specified including payment of Forest Royalty and Sales Tax and other duties and taxes as may be necessary. |
| 6 | Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (a) Upto a depth of 1.5 metre |
| 7 | Earth /Sand filling in plinth in layers not more than 150 mm thick including necessary carriage , watering , ramming etc. completed and specified including payment of land compensation , forest royalty , sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work. |
| 8 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city |
| 9 | Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a) Brick on flat soling. |
| 10 | Plain cement concrete works with course aggregate of sizes 13mm to 32mm in foundation bed for footing steps, for walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (Shuttering where necessary shall be measured and paid separately) (a) In prop 1cement: 4 sand :8 coarse aggregate by volume (100mm thick) |
| 11 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume |
| 12 | Plain cement concrete floor base in prop1:3:6 laid in alternatebays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete.(C) 50mm thick |
| 13 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. |
| 14 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 |
| 15 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (B)In super structure from plinth level up to 1st floor level. i) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 |
| 16 | (B)In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3 |
| 17 | Extra over item Nos. 2.2.1 (I) (B),above for each subsequent floor or part thereof above the 1st floor level. |
| 18 | Above Teraace floor |
| 19 | Supplying fitting & fixing in position reinforcement bars confirming to relevant I.S.Code for RCC work/R.B Walling including straghtining, cleaning, cutting and bending to proper shape and length as per details supplying and binding with 20G annealed black wire and placing in position with proper block, supports, chairs, spacers etc complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Jindal steel/ Shyam Steel/RINL(ii) Super Ductile (SD) TMT reinforcement bars |
| 20 | Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level. 1st floor to terrace floor level |
| 21 | terrace floor to staircase headroom level |
| 22 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, shuttering and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced and plain cement concrete work in.Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(a) Using 38mm thick plank |
| 23 | Sides of tie beams, grade beams etc. at or below ground level. (a) Using 38mm thick plank |
| 24 | Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (a) Using 38mm thick plank upto Roof |
| 25 | Vertical surface such as walls (any thickness), parapet walls, partitions, walls of septic tank, inspection pit and the like including attached pilasters, butresses, plinth and string courses and the like.(i) Using 38mm thick plank |
| 26 | Extra for each subsequent 1.0M height or part thereof beyond the initial height of 4.0M as mentioned above in 3.1.1 |
| 27 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in : Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face |
| 28 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). First Floor to Terrace floor |
| 29 | terrace floor to staircase headroom level |
| 30 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. |
| 31 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). Terrace floor |
| 32 | staircase headroom level |
| 33 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. |
| 34 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). Terrace floor |
| 35 | staircase headroom level |
| 36 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. |
| 37 | Extra for each subsequent 1.0M height or part thereof beyound the initial height of 4.0M as mentioned in item no. 3.2.1(above first floor level) |
| 38 | Extra for each subsequent 1.0M height or part thereof beyound the initial height of 4.0M as mentioned in item no. 3.2.1(above terrace floor level) |
| 39 | Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.2.1 & 3.2.3(b). First Floor to Terrace floor |
| 40 | Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed.(I) In Sub-structure upto plinth level including dewatering if necessary. (a) In proportion 1:3. |
| 41 | Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4. |
| 42 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paidseparately)(A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand) |
| 43 | Extra for brick walling for each subsequent floor or part thereof above the 1st floor level.(a) 112mm thick brick/ R.B wall |
| 44 | Extra for brick walling for each subsequent floor or part thereof above the Terrace floor level.(a) 112mm thick brick/ R.B wall |
| 45 | Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete. (c).Stone soling of thickness 150mm. |
| 46 | Superlight weight Autoclaved Aerated Concrete Block work using Grade-I AAC block of size 625x240mm of different thickness of compessive strength 40kg/cm2 having dry dencity 550 to 650kg/Cum conforming to IS-2185 Pt-4 in cement mortearof prop. 1:4 including racking out joints and curing complete as apecified & directed. ( protruding rod is to be provided at every 3 course interval and will be measured and paid separately)(II)In Super-structureabove plinth level upto 1st floor level. (b) For 200mm thick wall |
| 47 | ( c) 125mm thick wall |
| 48 | e) 75mm thick wall |
| 49 | Extra for AAC block walling for each subsequent floor or part thereof above the 1st floor level.ii) 200mm thick wall over Item No 4.4.2(II)(b) @ 34.00/- per floor a) First Floor |
| 50 | (iii) 125 mm thick wall over Item No 4.4.2(II) ( c) @ 21.00/- per floor a) First Floor |
| 51 | b) Terrace Floor |
| 52 | (v) 75mm thick wall over Item no 4.4.2.(II) ( c )@ 13.0/- per floora) First Floor |
| 53 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). (b) 1.60mm thick sheet (iii)Size 125mm x 60mm (Single rebate) |
| 54 | Providing and fixing Flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panel conforming to relevent to IS Code including oxidised iron butt hinges (100 mm X 75 mm X 3.5 mm) 6 nos. with necessary wood screws. (b) Decorative type face panel and block board core. (i) 35 mm thick |
| 55 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.(a) 15 mm thick |
| 56 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed.(Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal rangeSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above |
| 57 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. (B) VITRIFIED TILES i)Normal range (Sizes 300 mm x 300mm and above) (Premium) |
| 58 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). b) Executive range Somany/ Orient/Nitco/Asian Make ii) Of size 250mmx350mm and above |
| 59 | Providing polished granite tiles of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) (ii) With White cement |
| 60 | Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base ofcement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade. |
| 61 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises orrounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.c) In cement mortar 1:5 |
| 62 | Extra over item 6.2.1for interior plastering above 1st floor level for every additional floor or part thereof including curing complete as directed (a) on single coat plaster Above first floor level |
| 63 | Terrace |
| 64 | Headroom |
| 65 | Extra over item 6.2.2 for exterior plastering over wall upto a height of first floor level above ground level including curing complete as directed a) on single coat plaster Upto first floor level |
| 66 | Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. a) On Single coat plaster Above first flooe level |
| 67 | Terrace |
| 68 | Headroom |
| 69 | 15 mm thick Cement plaster in single coat on single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.A) On rough side b) In cement mortar 1:4 |
| 70 | B) On fair side b) In cement mortar 1:4 |
| 71 | Extra over item no 6.2.2 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed.a) On Single coat plaster Above first floor levelA) On rough side b) In cement mortar 1:4 |
| 72 | Above first floor level B) On fair side b) In cement mortar 1:4 |
| 73 | Extra over item 6.2.1 to 6.2.3for plastering on ceiling and soffits of stairs upto 1st floor level including curing complete as directed. Upto first floor level |
| 74 | Above first floor level |
| 75 | Extra over item 6.2.2 for interior plasteringabove 1st floor level for every additional floor or part thereof including curing complete as directed (a) on single coat plaster Above terrace level |
| 76 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (I) Thickness = 1.5 mm |
| 77 | Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
| 78 | Wall painting (two coats) with Plastic emulsion paint of approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approvedbrand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) |
| 79 | Finishing wall with two coats of acrylic emulsion exterior coatings ofof required shade by thinning by adding water as per the specification of the manufacturer after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. ) Asian paint/Berger paint/Nerolac |
| 80 | Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of Asian paint/Berger paint/Nerolac brand of required shade. |
| 81 | Applying primary coat over new steel and other metal surface over 100 mm in with or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel, would scrapers and sand paper. (a) With ready mixed "Red-Lead"/red oxide primer |
| 82 | Painting two coats (Excluding priming coats) on new steel and other metal surface with enamel paint of approved brand and manufacture to give an even shade including cleaning the surfaces of dirt, dust and other forein matters. (i) Surfaces over 100mm in width or girth b). High gloss(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 83 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) t) Door stopper with rubber stopper |
| 84 | Providing,fitting and fixing Door closer of various type UL listed and fire rated good quality depending on the door specification.Types like single speed,Double Speed,Heavy Duty etc are available and as directed & specified by the department. A) Godrej a) Single Speed Door Closer( size166.5x 48mmx 67mm)-Model C071 |
| 85 | Supplying, fitting and fixing anodized aluminium fittings of approved make, reasonably smooth, free from sharp edges flaws and other defects and with counter sunk holes for screws including necessary screws etc. complete ( anodized to bright natural matt or satin finish)(a) Sliding door bolts(i) 300 mm x 16 mm |
| 86 | (b) Tower Bolt (ii) 250 mm x 12 mm |
| 87 | (c) Door Handle(ii) 100 mm |
| 88 | (d) Butt Hinges vi) 100mm x 63mm x 3.2 mm |
| 89 | (m) Mortice lock vertical type (ii) 75mm(Godrej with handle(4 lever) |
| 90 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/ F suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of15mm each) from the soffit at 1220mm c/c with ceiling angle of width 5mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm thick Gypboard. False ceiling (Light Duty) with Moisture Resistant Board (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm longdrywall screws at 230mm c/c. Screwfixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc., cut out made with frame of perimeter channel supported suitably to be measured and paid separately as and where necessary). (ii)12.5mm MRB |
| 91 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (b)3 Track sliding window (i)6mm clear glass |
| 92 | a) Providing, fitting and fixing anodised aluminium fixed windows and ventilators of standard sections of approved brand, joints mitred welded (manufactured to relevant I.S. specification) fitted with glass panes of required thickness and 12mm prelaminated boards and providing and fixing handles, angle cleat, rubber gusket,rollerbolting device, screwsas required complete as specified and directed for all levels. (b) In Coloured anodised Aluminium section (i) With 6mm thick glass panes |
| 93 | Providing, fitting and fixing anodised aluminium framed glazed door with partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (ii) 6mm clear glass and 12 mm Prelaminated board |
| 94 | Providing and fixing Stainless steel (Grade 304) railing made of Hollow tubes, channels, plates, etc. including welding , grinding buffing, polishing and making curvature, (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete , i.e. fixing the railing with necessary accesories & stainless steelm dash fasteners , stainless steel boltsetc. of required size, on top of the floor or the side of waist slab with suitable arrangement as per the approval of Engineer in-charge .(For payment, onlyweight of stainless steel member is to be considered . No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered.(a) SS Railing Steel with Wire Locator. |
| 95 | Grading roof for water proofing treatment with(b) Cement mortar (ii)1:4 (1 cement : 4 coarse sand) |
| 96 | Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. |
| 97 | Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels. |
| 98 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire withnecessary shuttering , curing etc. completeincluding fixing in position as directed. b) 75mm thick slab |
| 99 | Providing, fitting and fixingM.S.grillof required pattern for windows/ clerestory windows/ openingwith M.S. flatsat required spacingin frame all round,squre or round M.S.bars with round headed bolts and nuts or screws. I .Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. |
| 100 | (a) White washing with lime on wall surfaces (two coats) to give an even shade including throughly brooming the surface to remove all dirt, dust,mortar drops and other foreign matter. |
| 101 | Structural steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.c) In M.S. angles, channels, Tees etc. |
| 102 | Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. |
| 103 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b)Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc.. |
| 104 | Providing, fitting and fixingM.S.grillof required pattern for windows/ clerestory windows/ openingwith M.S. flatsat required spacingin frame all round,squre or round M.S.bars with round headed bolts and nuts or screws.IIOrnamental grill (c) Fixed to Brickwork/P.C.C/R.C.C. |
| 105 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 40mm x 40mm x 6mm M.S. angle and with M.S. flat of 40mm x 6mm size as per approved design.Necessarylocking arrangement for temporary closing the gateand 2nos.( minimum) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embedded in C.C brick pillers as necessary including a red oxide painting to all iron works as directed and specified.(Separate payment will be made for posts). |
| 106 | BARBED WIRE FENCING: Supplying , fitting and fixing galvanised barbed wire fencing with seven strands of barbed wire 12 S. W. G .x 2plies x4 points at 75mm apart with angle iron intermediate fencing posts not more than 1800mm apart andstraining and end post etc. as necessary to be fitted with straining eye bolts and staples etc.complete as directed, specification of the angle iron post as given.(Alltheangle iron posts to be embeded 600mm in C.C.pillars ofsize 300mmx300mmx600mm in prop.1: 3: 6 and one coatof anticorrosive readymixed painting toalliron works)includingexcavation of foundationtrenchesfor C.C.blocksandrefilling and removal of surplus soil after completion of works. |
| 107 | Providing rails for plying of rollers of gate made made from 50mm x 6mm size M.S. flat and to be fitted with 3 nos of hinged hold fasts to be embedded in concrete prop. 1:2:4 of 10mm wide and 75 mm deep over brick flat soling 250mm wide including curing etc. complete. |
| 108 | Providing roller to the gate including welding etc.complete a) With 25mmx50mm (dia) roller |
| 109 | PAVERS FOR PARKING AREA , GLOW SIGN BOARD & OTHER ADDITIONAL WORKS: ProvidingSUN ROCK HIGH CST/ DEVI paver block/ tiles of concrete grade M30 or above of approved quality, size shape of specified thicknessover a levelling bedding layer of 30mm compected sand over a base course of WBM or PPC (base course to be paid saperately) inculding cutting where necessary finished with spreading, sweeping jointing sand and compacting the pavers using vibrating compector as specified and directed. (A) SUN ROCK HIGH CTS / Devi Tiles (Pavers) (a) 80 mm thick |
| 110 | WATER PROOFING Providing and applying over roof/ raft slab, two coats of waterproofing slurry prepared with cement, fine sand in prop 1:1 admixed with modified acrylic polymer like Cemflex of Sika India Ltd./Dr. Sealkit Sealcrete (Asian Chemicals),/ RHEOMIX 131 OF BASF by brush @ 0.25% of cement-sand mixture (by weight) after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete. |
| 111 | Providing treatment of constructional joints in R.C.C. walls and slabs by supplying, mixing and applying a 2-component epoxy resin based bonding agent for old to new concrete like Master Bond - EP/ Concresive 1414 of BASF/Dr. Sealkit Bond OTN (Asian Chemicals) (with an open time of 6 hours at 30 deg Celsius) as per detailed drawings or as specified and directed by the Department complete at all levels. (i) Slab/ Wall thickness upto 200mm |
| 112 | Providing Grouting in R.C.C. walls & slabs by drilling holes @ 300mm c/c upto half of the wall depth in zigzag manner or as per drawings using a drill machine and fixing a nozzle of 20mm dia. for injecting a grout/ grout slurry till the refusal of injected grout material from adjacent nozzle (grouting operation pressure shall be in between 2 to 4kg per sq.cm.). Followed by cutting the exposed nozzle so as to make the wall free from the grouting pipes and to seal the gap with polymer modified mortar as specified and directed by the Department complete at all levels. (a) Grout slurry of cement, water and grout admixture Cebex 100 of Fosroc Chemicals /Flowcable 50 of BASF/Dr. Sealkit NSPG (Asian Chemicals) @ 225gms per bag of cement |
| 113 | Providing and applying two component epoxy resin based moisture intensive low viscous chemical UF for high pressure injection grout with drilling and fixing of nozzle at 0.30 mt.centre to centre as per manufacturer specification.The cost is inclusive of materal,labour,tools and tackles etc.all complete (Chemical and technique shall be as specified in the drawing) |
| 114 | ANTI-TERMITE WORKS Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 115 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. |
| 116 | ARCHITECTURAL FAÇADE : Cladding with MCM Modified Clay Material of PHOMI make. Supply of MCM Modiffied Clay Material of PHOMI make as per company stendered dimension, pattern, color as specified, manufactured through unfired patended (Ref. US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K -EN 12667 (2001), thermal resistance of 0.0568 M2 K/W - EN 12667(2001) and fire insulation - Class-A- ASTM E84 - 15. The Product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement / Polymer / Epoxy based adhesive as per adhesive chart and substrate and per directions of engineer in charge. Grouting should be done using filling and pointing method as per installation drawing provided, and color of the grout should be as per the architects specification depending on the substrate and as per the direction of Engineer -in-Charge. K Series Faching Brick - 225 x 60 mm thickness. |
| 117 | Cladding with fiber cement board. Providing and fixing external wall panelling in position 12 mm thick "SHERA, GLO or Equivalent" fiber cement planks made of autoclaved technology of size 1200 mm x 2400 mm conforming to IS: 14862 : 2000 / (ASTM 1185) on to steel frame work of MS/ Aluminium sections. The M.S/ Aluminium Section should be minimum SHS 50 mm x 25 mm x 2.6 mm thick. The main vertical member are placed @ 610 mm C/C and secured to the existing wall, floor and soffits with the help of MS cleat fixed @ 610 mm C/C vertical. The main member should be fixed horizontally @ 1220 mm C/C. Before fixing the board for groove design 8 mm SHEra Fiber Cement Boards conforming to IS : 14862 need to fixed on the MS tube. For Steel members are to be painted with an synthetic paints over a coat of red oxide. Fix the board with the help of 25 mm self driling. self tapping SHERA Fiber Cement screws @ 300 MM C/C including the cost of Acrylic primer with a wooden paint as per manufactureer specification. The work to be done as per architectural drawings and direction of the Engineer - in Charge.Fiber cement plain board. |
| 118 | FURNITURE AND FURNISHING ( Approved BRAND OF GODREJ/STELLAR/FEATHERLITE as directed by Authority with Orginal Equipment Manufacturer, International Membership of BIFMA, Compliance of Sustainability Standard (BIFMA E3-2014), Compliance of Energy Management System (ISO-50001:2011), Compliance of Quality Management System (ISO- 13485:2016), Compliance of quality management system ISO- (9001:2015) EXECUTIVE DESK GRADE I : Supplying,fitting, fixing of Rectangular table top made with 25mm thk PLPB finished with 2mm thk PVC edgeband along with 18mm thk PLPB understructure with all necessary fittings and hardwares (Size 2195 x 900 x 750) |
| 119 | Supplying,fitting, fixing of Storage cabinet with 2 drawers & shutters(Size 1195 x 400 x 750) |
| 120 | EXECUTIVE DESK GRADE II : Supplying,fitting, fixing of Rectangular table top made with 25mm thk PLPB finished with 2mm thk PVC edgeband along with 18mm thk PLPB understructure with all necessary fittings and hardwares (Size 1500 x 900 x 750) |
| 121 | Supplying,fitting, fixing of Storage cabinet with 2 drawers & shutters (Size 1050 x 400 x 750) |
| 122 | WORK STATION GRADE- III : Supplying,fitting, fixing of Rectangular table top made with 25mm thk PLPB finished with 2mm thk PVC edgeband along with 18mm thk PLPB understructure with all necessary fittings and hardwares (Size 1500 x 900 x 750) |
| 123 | CONFERENCE TABLE : Supplying,fitting, fixing of Conference table made with 25mm thk PLPB understructure finished with 2mm thk PVC edgeband alongwith 18mm thk PLPB understructure with double modesty and access flap (450mm ) - 4 nos. and all necessary fittings and hardwares (Size 4265X1500X750) |
| 124 | RECEPTION & WAITING : Supplying,fitting, fixing of Visitor Sofa Bench |
| 125 | CHAIR : Supplying,fitting, fixing ofGRADE I -EMPLOYEES- Hi-Back Revolving chair |
| 126 | CHAIR : Supplying,fitting, fixing of GRADE II - EMPLOYEES |
| 127 | CHAIR : Supplying,fitting, fixing of GRADE III - EMPLOYEES |
| 128 | Supplying,fitting, fixing of CONFERENCE ROOM CHAIR |
| 129 | LANDSCAPING WORKS : LAWN MAKING BY TURFING: Supplying and laying of selectedgrass turves [ size 60 cm x 30 cm] after preparing the land by removing of all unwanted debrises ( rubbles, pebbles, plant roots etc.), mixing of organic manure,levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of laying of grass including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.(a) By Bahpotia grass and Doob grass (Cynodon dactylon) : |
| 130 | POT PLANTING Supplying and planting of seasonal flower in required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (II) Using earthen pot of 60 cm dia. |
| 131 | BED PLANTING Supplying and planting of Dahlia / Chrysanthemum / Gladiolus on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . |
| 132 | HEDGE PLANTING / EXTERNAL HEDGE Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide)including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD (iv) WithThuja / Ixora |
| 133 | TREE PLANTING Supplying and planting of ornamental trees (1"-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (A) Neem / Mahaneem / Beef wood/ Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu/ Ajar |
| 134 | SHRUB PLANTING Supplying and planting of ornamental shrub ( below 1"-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . (B) Allmanda / Khorika zai / May flower / Kamini / Kathanda / Tecoma / Acalypha / Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda |
| 135 | Preparation of a carpet bedding by raising the backside of the bed to a height of 45 cm (average) after mixing organic manure, fertilizer including supplying and planting of grass and specimen plants (Brindavan) to engrave the desired letters, necessary maintenance for a period of 6 months from the date of plantingcomplete as directed and specified by the department. |
| 136 | FIRE FIGHTING: HYDRANT SYSTEM: Providing,Fixing, testing &Commissioning of Single Headed Gun Metal ISI Marked oblique pattern Hydrant Landing Valve with 80 mm dia, flanged inlet & 63 mm dia instantaneous type female outlet complete with cap and chain, twist release lug and all accessories as per IS:5290-19833 (Type-"A") and specifications complete as reequired . (MAKE:ESSEL/WINCO/NEWAGE) |
| 137 | Providing,Fixing,Testing & Commissioning of Mild Steel Black Pipe(IS:1239part-I) Heavy class including cutting, screwing, welding etc. and providing all fittings viz forged steel screwed fitting upto 50mm dia and bolt welded above 50mm dia flanges, bends, tees, reducers, elbow, clamps, hangers etc including cutting holes and chases in brick or RCC walls/ slabs and making good the same to the approval of Engineer-in-charge/ consultant complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including steel work complete as required. (Make:TATA/JINDAL/NEZONE)a)200 mm dia |
| 138 | Supplying & Fixing Cast iron body Non Return valves complete with matching flanges, rubber insertion, nuts, bolts and washer etc. (IS:5312) of following sizes complete as reqd. (Make:Koley/Kalpana/Audco)(a) 150 mm dia |
| 139 | Providing ,Fixing,Testing & Commissioning of G.M. Stop Valve ISI Marked screwed type tested to 30Kg/cm2 pressure as per IS:778-1984 of following sizes complete as reqd.(a)50 mm dia |
| 140 | Providing ,erection,Testing & Commissioning of Pressure Switch (MAKE:INDFOSS) |
| 141 | Supplying, Installation, Testing & Commissioning of First Aid Hose reel drawn with 30 Mtrs. Long rubber hose and G.M shut off nozzle, 25mm dia Gate valve, Union pipe complete set confirming to IS: 884. |
| 142 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD |
| 143 | DISMANTLING WORKS:- Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels |
| 144 | Demolishing plain cement concrete including disposal of debris as directed for all levels(i) Prop (1 : 4 : 8) or leaner mix |
| 145 | (ii) Prop (1 : 3 : 6) or richer mix |
| 146 | Demolishing RB work including stacking of steel bars and disposal of unserviceable material as directed for all levels |
| 147 | Extra for cutting reinforcement in RCC or RB work at all levels (Payment to be made on cross sectional area of RCC or RB work obtained by multiplying the length of the cut reinforcement and thickness of the member). |
| 148 | Dismantling of existing steel windows/ steel ventilators/ steel windows and steel ventilators without damaging the walls, removing to a safe place and necessary repairs to the edges of walls. |
| 149 | Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels |
| 150 | Dismantling wood work in frames, trusses, purlins and rafters including stacking the materials as directed by the department for all levels. |
| 151 | Dismantling steel work in built up sections in joists, angles, channels, tees, flats etc. including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking the materials as directed by the Department for all levels |
| 152 | Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. (i) Area of door/window up to 3.00 m2 |
| 153 | (ii) Area of door/window above 3.00 m2 |
| 154 | Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. |
| 155 | Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels |
| 156 | Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels |
| 157 | RAIN WATER HARVESTING Providing,Fixing, testing &Commissioning ofRain water Hervesting system for 1000 sq.feet roof area with 110 mm uPVCpipe of Class-3 conforming to IS:4985-200 (with uptodate amendment) with extra UV ray protection by Titanium Dioxide(TiO2) directing the Rainwater toRainy filter/Pop-up raintap filter (Excluding Civil Works) |
| 158 | Water storage tankISI Marked, conforming to IS:12701/1996 (with uptodate amendment).(Excluding Civil Works) |
| 159 | ADDITIONAL WORKS:- Supplying fitting and fixing of Glow sign board as directed by the Department. |
| 160 | Steel Reck |
| 161 | Bamboo Furniture |
| 162 | Bamboo Side Table |
| 163 | Bamboo Dust Bin |
| 164 | Bamboo Clading in Reception oom |
| 165 | Santary fittings and internal arrangement for Differntlyable person |
| 166 | Water Dispensary |
| 167 | Coffee Machine |
| 168 | Providing Curtain with Stainless Steel Curtain pipe |
| 169 | Children Friendly Police Corner Furniture- Folding Bed. |
| 170 | Table (Small) |
| 171 | Chair (Children) |
| 172 | Sheetal Pati |
| 173 | Supply fitting and fixing stainless steel letter at size 200 mm as directed. |
| 174 | SANITARY & WATER SUPPLY WORKS : Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) B) Hindware make a) White (i) Water closet Green (Cat No.20079) (inclusive of seat cover) |
| 175 | Supplying, fiting and fixing PVC flushing cisternwith all internal fittingswith CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) ii) Hindware make a) White (i) Sleek+ PVC cistern |
| 176 | Providing fitting & fixingstainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipeetc. complete includingpainting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (A) Parryware Make (vi) Single Bowl (160 x 180) Flat Edge - Glossy (Cat.No.C8538) |
| 177 | Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (b)Apex/Kiran/Priya/Star/RimZim/Bugle shower with arm |
| 178 | Providing vitreous Chinawash basinwith CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Basin (without pedestal) (B) Hindware Make (a) White (i) Alto 510 x 400 (Cat. No.10091) |
| 179 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1331N) |
| 180 | Providing, fitting and fixing Decorative Mirror of Agmeco makecolour CP frame complete as directed and specified. (A) Parryware Make(b) Size 600mm x 450mm |
| 181 | Providing, fitting and fixingCP towel ring of Jaquar make complete as specified and directed (a) Jaquar make (i) Continental towel ring square (Cat.No. ACN-1121) |
| 182 | Providing and fixing CP liquid soap dispenser and liquid soap container of Agmeco make complete as specified and directed. (ii) Agmeco Make (a) Liquid soap container Capsule Type (Cat.No.LSC-0001) |
| 183 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.(b) Sona (iii)Rupa 50mm (HT/ FT) (Cat.No.WS-0801) |
| 184 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. ii) Bottle trap Indian 40 mm (Cat. No. BT- 0752) |
| 185 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (ii) Jaquare make (a)Continental /Clarion (i)Standard |
| 186 | (II) Jaquar Make (b) Queen"s collection (ii) C.P.2-way bibcock with wall flange |
| 187 | (II) Jaquar Make (a)Continental /Clarion (iii)2-Way bib cock |
| 188 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) I) Jaquar (b) Queen"s collection (ii) concealed stop cock with adjustable wall flange |
| 189 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. (ii) Jaguar make (b)Long neck with areator |
| 190 | Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) (II) Agmeco brand a) Sink cock casted swivel spout |
| 191 | Supplying Fitting and fixing C.P. basin mixer complete as directed (III) Jaquar make b) Queen"s Collection (i) Central hole basin mixer with regular spout without popup waste system with 450 mm long copper pipes and brass nuts Cat No. 7167 |
| 192 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. |
| 193 | Providingfitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 19 Kg. weight complete as directed and specified |
| 194 | Providingfitting and fixing vitreous china flat back type lippedfront urinal basinwith standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting offittings and brackets, cutting andmaking good the walls& floors wherever required. (A) Parryware Make (i) New Magnum (Cat. No.C0575) |
| 195 | Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified. (i) Parryware Make(a) White (i) Partion Magnum / Large (Cat. No.C0571/07) |
| 196 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISIapproved including joining ,fitting and fixing wiyh clamps etc.as necessary completeat all levels including below G.L as directed and specified.(Soil + Waste + Rain Water) a) In exposed surfaces or in trenches. (ii) 110mm dia. |
| 197 | (iv) 75mm dia. |
| 198 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages. (ii) 110mm dia. |
| 199 | (iv) 75mm dia |
| 200 | Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.Cand making good to the damages.(ii) 110mm dia. |
| 201 | Supplying, fitting and fixing 87.5 degree PVC bend of(Supreme/Prince) or other ISIapproved including joining ,fitting and fixingetc.as necessary completeat all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. |
| 202 | (iv) 75 mm dia. |
| 203 | Supplying fitting fixing 45 degree PVC bend of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/ C.C/ R.C.C. and making good to the damages. ii) 110mm dia |
| 204 | Supplying fitting fixing PVC single "Y" of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. a) In exposed surface ii) 110mm dia |
| 205 | Supplying fiting and fixing PVCsingle tee with door of(Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. |
| 206 | Supplying fitting fixing PVC single tee with door of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/ C.C/ R.C.C. and making good to the damages. ii) 110mm dia |
| 207 | Supplying fitting fixing PVC cross "T" plain of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. a) In exposed surface i) 110 x 110 mm dia |
| 208 | Supplying fitting fixing PVC double "Y" plain of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L as directed and specified. a) In exposed surface i) 110 mm dia |
| 209 | Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approvedincluding joining , fittingand fixing etc. in exposed surface or trencesas necessary complete at all levels including below G.L. as directed and specified.(a) 110 mm |
| 210 | Providing fitting and fixing PVC cowel of ISI make completeas directed and specified.(ii) 110mm dia. PVC cowel of ISI make |
| 211 | Providing fiting & fixingC.I. Grating to the floors complete asdirected and specified.(a) 110mm dia |
| 212 | (b) 75mm dia |
| 213 | Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories)(i) exposed on wall (a) 15 mm OD |
| 214 | (b) 20 mm OD |
| 215 | (c) 25 mm OD |
| 216 | (d) 32 mm OD |
| 217 | (e) 40 mm OD(Terrace Header) |
| 218 | (f) 50 mm OD(Terrace Header) |
| 219 | (ii) Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to damages (a) 15 mm OD |
| 220 | (b) 20 mm OD |
| 221 | (c) 25 mm OD |
| 222 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings FOR EXTERNAL USE (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) ii)20mm (OD) diameter |
| 223 | iii) 25mm(OD) diameter |
| 224 | iv) 32 mm(OD) diameter |
| 225 | v) 40 mm(OD) diameter |
| 226 | vi) 50mm(OD) diameter |
| 227 | Supplying, fitting and fixing Chrome Plated (C.P.)wall mixercomplete as directed. (III) Essco makee) Wall mixer with 115mm long bend pipe for connection to overhead shower (with bush and piston divertor fitting)Cat No.517B |
| 228 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Makeas specified and directed.a) 50mm dia |
| 229 | b) 40 mm dia. |
| 230 | c) 25 mm dia. |
| 231 | Supplying and fitting ball valve as specified and directed..a) 25 mm dia. (gun metal) |
| 232 | Supplyingfitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. a) 50 mm dia (Heavy type) |
| 233 | Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department .iv) Bore hole of 150 mm diameter |
| 234 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.(ii) P.V.C.pipeSUPREME /PRINCE / FUSION /SFMC Brand v) 110mm diameter |
| 235 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. ii) 32mm diameter |
| 236 | Supplyingfitting and fixing GI filter 2.00 metre long. |
| 237 | Supplying, fitting and fixing 50mm dia check valve (non returning valve) including tread to pies. |
| 238 | Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained |
| 239 | Flushing, clearing, washing and watering of the tube well |
| 240 | Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materialsof various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six months. (A) With Zoloto fittings. (II) 2000 liters capacity (a) 4 mm thick Vessel |
| 241 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (I) 2000 Lt capacity (a)Sintex make |
| 242 | Labour for erectingand placing PCVCTankover the stagging of 5.00m up to 8.00m complete as directed. (a) 2000 litre capacity |
| 243 | Supplying and Installation of 1.5 H.P. Crompton Greaves Single phase Pump Submersible Pump Set including necessary Cable for underground and overground. Panel Board as directed by the Department. |
| 244 | Supply & fitting inner PVC kit at Bio S/ Tank (I) |
| 245 | Anaerobic Microbial Bacteria (AMI) for Bio Digerster @30% of the tank capacity |
| 246 | Maintenance Legacy- 3 years for 2nd year Area : RCC Portion 3.15 M height Ground Floor |
| 247 | 1st Floor |
| 248 | Assam type 1st floor |
| 249 | for 3rd year Area :RCC Portion 3.15 M height Ground Floor |
| 250 | 1st Floor |
| 251 | Assam type 1st floor |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
