}

Construction Of Anganwadi Buildings ( No 101 & No 291 ) At Salagar Taluka Akkalkot District Solapur, akkalkot-Maharashtra

Rural Development Department has published Construction Of Anganwadi Buildings ( No 101 & No 291 ) At Salagar Taluka Akkalkot District Solapur. Submission Date for this Tender is 12-10-2021. Building Work Tenders in akkalkot Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

29455831
Construction Of Anganwadi Buildings ( No 101 & No 291 ) At Salagar Taluka Akkalkot District Solapur
Open Tender
Indian
Maharashtra
akkalkot
12-10-2021

Tender Details

Construction Of Anganwadi Buildings ( No 101 & No 291 ) At Salagar Taluka Akkalkot District Solapur

Key Value

Document Fees
INR 1000 /-
EMD
INR 17000.0 /-
Tender Value
INR 17 Lakhs /-

BOQ Items

Name of Work Construction of AnganwadiBuildings( No 101 & No 291 ) at SALAGAR TalukaAkkalkotDistrictSolapur
Sl. No. Item Description
1Excavation for foundation in earth, soil of all types, sand, graval andsoft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreding as directed, dewatering, preparing the bed for the foundation and necessary back filling, remming, watering including shoring and strutting etc. complete.( LIFT UP TO1.5 M.) DSR P.No. 148/21.02 Spec. No. Bd A1 P.No. 259
2Excavation for foundation in hard murum including removing the excavated materials upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling,ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m)By Manual Means DSR P.No.148/21.06Spec. No.: Bd.A.2 Page No. 259
3Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Woodencentering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandDSR P.No.169/24.08Bd.E.4 Page No. 289 and B-7, Page No.38
4Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandDSR P.No. 169/24.01 Spec. No. Bd E.1P.No. 287
5Providing and laying in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandDSR P.No. 172 /25.11Spec. No. Bd F3 P.No. 298
6Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand DSR P.No. 173/25.31 Spec. No. Bd F5P.No. 300
7Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand DSR P.No. 175/25.50 Spec. No. Bd F6P.No. 300
8Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting, curing ,inishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand DSR P.No. 178/26.05 Bd.F.9 Page No. 303 and B.7, Page No.38
9Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, ompactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand DSR P.No. 176/25.70Spec. No. Bd F8P.No. 302
10Providing and fixing in position TMT-FE-500bar reinforcement of various diameters for R.C.C. pils caps,footings,foundations, slabs, beams, columns, canopies, staircase, neweis, chajjas , lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. b) Tor SteelDSR P.No. 182/26.33Spec. No. Bd F17 P.No 306
11Providing Ilnd class Burnt Brick masonary with conventional type bricks in CM 1:6 in Foundation and Plinth of inner walls inplinth , external walls in plinth , external walls including striking joints, racking out joints on expsoed faces and watering comp. DSR P.No.189/27.01 Spec. No. Bd G1P.No. 313
12Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding Complete.DSR P.No.189/27.05 Spec. No. Bd G1P.No. 315
13Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.DSR P.No.189/27.06 Bd.G.7 Page No. 316
14Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. DSR P.No. 152/21.36 Spec. No.: Bd.A.10 Page No. 262
15Filling in the Plinth and Floors with Contractors soil sand or murum in 15cm to 20cm layers including watering and compaction complete. DSR P.No. 152/21.37Spec. No. Bd A 11 P.No. 263
16Providing and fixing double leaf steel door without ventilator including shutter of MS frame of angle 50x50x6 mm and shutter frame of MS angle of 30x30x6 mm and shutter sheet of 10 guage of approved quality with hold fast neceaasry fixing and fastening and fixtures,necessary welding with oil painting three coats including primer coate complete as per detailed drawings and as directed complete. As per RA
17Providing and fixingsteel windows of veriousas per detailed drawings without ventilator and steel frame of angle 40x40x5 mm and shutter frameof 25x25x5 mm and shutter with MS sheet of 18 guage of approved quality with hold fast neceaasry fixing andfixing and fastening and fixtures,necessary welding with oil painting three coats including primer coate complete as per detailed drawings and as directed complete. (Including M S guard bars of 12 mm at 10 cm c/c and MS flat of 40x6 mm)RA Spec.No. :As directed by Engineer in charge.
18Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. DSR P.No. 248/39.68Spec.No. :As directed by Engineer in charge.
19Providing internal cement plaster 6 mm thickin single coat in CM1:3 without neeru finish to concrete or brick srfaces in all positions including scafolding and curing etc. Complete. DSR P.No. 201/32.02 Spec. No. Bd L 1P.No. 367
20Providing internalcement plaster 12mm thick in single coat in CM 1:5 without neeru finish,to concrete, or brick srfaces in all positions including scafolding and curing etc. complete.DSR P.No. 201/32.03Spec. No. Bd L 2 P.No. 368
21Providing internalcement plaster 20mm thick in two coat in CM 1:5 without neeru finish,to concrete, or brick srfaces in all positions including scafolding and curing etc. complete. DSR P.No. 201/32.06Spec. No. Bd L 4 P.No. 368
22Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. DSR P.No. 207/33.24 Spec. Bd.M 12 . P.No. 385
23Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. DSR P.No. 207/33.25 Spec. Bd.M 12 . P.No. 386
24Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete.DSR P.No. 207/33.20Bd.M.29 Page No. 391
25Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polishDSR P.No.208/33.32Bd.M.35 B/P No.393
26Providing and fixing Orissa type white glazed earthen wear 580mm water closet pan including "S" trap with earthenware foot rest cast iron soil and vent pipe upto outside face of wall 1:2:4 brick bat lime bedding without flushing tank and its accessariesetc. complete.DSR P.No.266/42.30Spec : As directed by Engineer In Charge
27Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete DSR P.No.261/41.65Spec. No. BD V 30 P. No. 565
28Providing and fixing 10cm. C. i. nahani trap including c. i. gating bend and piece of c.i. pipe upto outside face of wall complete. DSR P.No.262/41.80 Spec. No. Bd V-32P.No.567
29Providing and fixig 15mm dia. Screw down bib stop tap of brass including necessary socket union nut complete DSR P.No.258/41.40Spec. No. Bd V-8P.No.554
30Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.DSR P.No.268/42.55 Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge
31Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.DSR P.No.269/42.57 Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge
32Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacitybetween 200 to 1000 litersDSR P.No.268/42.53Spec. No.: As directed by Engineer in charge
33Providing and fixing 100 mm dia. Stabiliser pipe / P.V.C. soil vent. / West pipe and with necessary fixtue and fastening such as bend tees single junction slotted vent clamp etc. complete. DSR P.No.268/42.52Spec : As directed by Engineer In Charge
34Providing and fixing Road juction / information signf board of size .090 x 0.60 m prepared on 16 guage M.S sheet with angle iron frame of size 35 x 35x 3 mm with cross bracing 25 X 25 X 3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green /white back ground and back side gray stove enakelled,bonded with red Retro reflective sheet Engineering grade,border / letters/ numerals and arrow and arrow. coated with non pealable crystal clear protective coat retaining 100% relection including two angle iron post of size 50 x 50x 5mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bands of 25 cm. with 4 nos .high strenghth G.I bolts and nuts of size 10 mm dia .and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying ,fixing in ground with cement 1:4:8 blockof 60cm x 60 cm x 75 cm size as directed by Engineer -in- charge etc. complete. DSR P.No. 76/6.36
35Test of water absorption (set of 5 bricks), compressive strength (set of 5 bricks), Effloresence(set of 5 bricks)of Brick etc.DSR P.NO-587/13
36Test of compressive srength of c.c. cube (set of 3 cubes) etc.DSR P.NO-588/19
37Test of8mm to 16mm steel ( set of 3 bars) etc.DSR P.NO-591/77
38Royalty Charges of Sand
39Royalty ChargesofFilling in plinth
40GST Charges
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail