}

8299 Repairs / Replacement And Cleaning Of Sewage Line, Manholes, Septic Tanks And Misc Works Like Hard Standing, Fencing, Drains Etc At Vbv, Map Ph-I, Dca, 10 Sikh Regt And Dad Under Age Br I South Pune 8299 Repairs / Replacement And Cleaning Of Sewage L, GE SOUTH PUNE-Maharashtra

Military Engineer Services-MES has published 8299 Repairs / Replacement And Cleaning Of Sewage Line, Manholes, Septic Tanks And Misc Works Like Hard Standing, Fencing, Drains Etc At Vbv, Map Ph-I, Dca, 10 Sikh Regt And Dad Under Age Br I South Pune 8299 Repairs / Replacement And Cleaning Of Sewage L. Submission Date for this Tender is 20-10-2021. Drainage Tenders in GE SOUTH PUNE Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

29361562
Corrigendum : 8299 Repairs / Replacement And Cleaning Of Sewage Line, Manholes, Septic Tanks And Misc Works Like Hard Standing, Fencing, Drains Etc At Vbv, Map Ph-I, Dca, 10 Sikh Regt And Dad Under Age Br I South Pune 8299 Repairs / Replacement And Cleaning Of Sewage L
Open Tender
Indian
Maharashtra
GE SOUTH PUNE
20-10-2021

Tender Details

8299 Repairs / Replacement And Cleaning Of Sewage Line, Manholes, Septic Tanks And Misc Works Like Hard Standing, Fencing, Drains Etc At Vbv, Map Ph-I, Dca, 10 Sikh Regt And Dad Under Age Br I South Pune 8299 Repairs / Replacement And Cleaning Of Sewage Line, Manholes, Septic Tanks And Misc Works Like Hard Standing, Fencing, Drains Etc At Vbv, Map Ph-I, Dca, 10 Sikh Regt And Dad Under Age Br I South Pune

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 08-Oct-2021 8299 Corrigendum No 1 BOQ BOQ 20-10-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 88000.0 /-
Tender Value
INR 44 Lakhs /-

BOQ Items

Name of Work: REPAIRS / REPLACEMENT AND CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANKS AND MISC WORKS LIKE HARD STANDING, FENCING, DRAINS ETC AT VBV, MAP PH-I, DCA, 10 SIKH REGT AND DAD UNDER AGE BR I SOUTH PUNE
Sl. No. Item Description
1Scooping & taking out sludge, sullageand foreign materials from septic tank, soak wells of any description and depth including removing and refixing of accessories and appliances required for safe disposal of sludge, sullage and foreign materials either by carrying the same in covered van/trolley outside defence land and it should be disposed off at such place which is not determinated to public health complete all as specified and as directed. (Note :- Depth shall be measured for payment after bailing out water and the rate quoted inclusive of cost required for bailing out water.)
2Demolition and breaking up RCC, SWG drain pipes set in cement mortar for the following sizes and removing debris from the site complete all as directed byEngr-in-Charge :-
3150 mm bore
4200 mm bore
5250mm bore
6300mm bore
7Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting outin soft/loose soil complete all as specified and as directed.
8M&L for RCC pipes class NP-2 with socketed ends laid and jointed complete with cementjoints of 150mm bore complete all as specified and as directed. (Note :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same is seems to be included in the contract)
9All as per item 4.00 above but 200mm bore complete all as specified and as directed.
10All as per item 4.00 above but 250mm bore complete all as specified and as directed.
11All as per item 4.00 above but 300mm bore complete all as specified and as directed.
12M&L for PCC 1:4:8 type D2 using 40mm graded agg as in bed to drain pipes including forming cradles for 150mm pipe complete all as specified and as directed.
13All as per item 8.00 above but 200mmbore complete all as specified and as directed.
14All as per item 8.00 above but 250mm bore complete all as specified and as directed.
15All as per item 8.00 above but 300mm bore complete all as specified and as directed.
16Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and as directed.
17Removing the excavated surplus soils not exc 50mtr anddepositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
18S&F in repairs PVC floor trap with steel grating including jointing with solvent cement of 75 mm bore complete all as spd and directed
19S&F in repairsPVC gully traps, square 125/110mm bore size with grating including jointing to waste pipe in cement joint, of outlet 100mm bore complete all as specified and directed.
20Cleaning of manholes of any size and of any depth by taking out semi solid/solid sludge complete and removing sludge in covered vehicle out of MOD land complete all as specified and as directed.
21Cleaning and rodding the blocked sewage line to any depth till the smooth flow of sewage line is restored including plugging of manholes temporarily as and when required and washing down complete sewage line with water including removing sludge and foreign materials from manholes in line and removing and refixing manhole covers and rodding complete all as directed byEngineer-in-Charge for following bore of pipes :-
22150 mm bore
23200 mm bore
24250 mm bore
25300 mm bore
26Day to day maintenance and petty repair of sewage line (complaints pretaining to safaiwala) by attending daily complaints lodged by the users through IVRS/mobile/sms/ or email and manual registratering of complaints at B/R complaint cell on all working days (except Sunday, National Holidays and Closed Holidays) by deploying03 (Three) Safaiwala per day, complete all as specified and directed by Engr-in-charge. [Note : (i) Minor complaint shall be completed within 24 hours and major complaints within a week. (ii) If safaiwala not attended complaint within time frame mentioned above 50% of rate quoted shall be deducted job completed by him. (iii) The contractor will be responsible to maintain daily job sheet completed by the safaiwala deputed by him in the sub work and obtained signature of I/C complaint cell/Engr-in-Charge daily at 1700 hours on all working days.]
27Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, for the following size of pipe :-
28150 mm bore
29200 mm Bore
30250 mm bore
31Demolition of cement concrete of any description and in any position not otherwise specifically provided for
32Demolition of brick work or stone/boulder masonry,built in cement mortar complete all as specified and as directed.
33Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for
34M&L for granite 18mm thick (of any type) work (table rubbed and polished) in steps, pillar, window cill, shelf, cooking platform and like in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
35Rounding to edges of stone slabs one edge, such as in steps,shelf cooking platform, and other similar situations complete all as specifed and directed.
36S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar onwall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specifed and directed.
37S & F machine cut cuddappa stone slab one side polished 40 to 50 mm thick as in shelf set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm screed bed in cement mortar(1:4) complete all as specifed and directed.
38M&L for cast iron floor/Nahani trap with grating 75mm dia including jointing to waste pipein run lead including removing old traps complete all as specifed and directed.
39M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate in Manholes covers and slabs set in CM 1:4 complete all as specifed and directed.
40M&Lfor mild steel TMT bars 8 to 10mm dia cut to length, bent to shape required, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specifed and directed.
41M&L for PCC (1:4:8) type D-2 as in foundations, filling in mass concrete etc. complete all as specifed and directed.
42M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and as directed.
43M&L for PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in benching, coping etc complete all as specified and as directed.
44M&L for brick work with fly ash Bricks straight or curved on plan exec 6 mtr mean radius with moduler bricks inCM 1: 6 complete all as specified and as directed.
45M&L for brick work with fly ash Bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specifed and directed.
46M&L for Plain cement concrete 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in surface channels and drains (including necessary form work) complete all as specified and directed.
47Rendering 15 mm thick on block walling surface in CM (1:4) finished surfaces even and smooth using extra cement complete all as specified and as directed.
48S&F in repairs vitreous china wash down water closet pan (squatting pan) white including provn of concrete bedding as fixed in repairs. Orissa pattern size 580x440mm white with integral foot rests (excluding flushing system and flush pipe) complete all as specified and as directed.
49S&F in repairs vitreous china wash down water closet pan, "Pedestal" coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.
50S&F in repairs vitrous china wash hand basin pedestal snow white 630x480mm flat back inclduingand providing waste pipe 40mm dia medium grade, CP brass waste coupling 32mm dia with check nut washer etc fixed complete all as specifed and directed. (Make : Cera of cat no S2090109 or equivalent)
51S&F in repairfor 10 litres capacity PVC flushing cistern low level including ball valve inlet & outlet connection 15 mm dia PVC pipe with check nuts on both ends, PVC waste pipe 32 mm upto WC connection and GI 15 mm dia overflow pipe upto floor level complete all as specifed and directed.
52Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but not exc 4sqm each and removed to store complete all as specifed and directed.
53S&F Pressed steel door frame of frame size 105x60mm with one or more revates incl necessary fixing,hinges,lock strike plate and filled with PCC 1:3:6 type C-0 etc complete all as specified and as directed.
54S&Fpressed steel frame 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges lock strike plateand filled with PCC 1:3:6 type C-0 etc complete all as specified and as directed.
55S&F 30 mm thick Flush shutters, solid core construction, with particle board core and one face is covered with decorative face veneer with lipping / frame to match, supplied and fitted to chowkats complete all as specified and as directed.
56S & F 30 mm thick Iind class hard wood glazed and skeleton shutters, devided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a) complete all as specifed and directed.
57M & L for preparation of new or priviously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces complete all as specifed and directed.
58S & F stainless steel wirecloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specifed and directed.
59S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and as directed.
60S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specifed and directed.
61S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specifed and directed.
62S&F 150 mmaluminium anodized barrel tower bolts of extruded section for door shutters complete all as specifed and directed.
63S & F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specifed and directed.
64S & F 300 mm long Mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 06 bolt and nuts, four on boltplate and two on staple plate and fixed complete all as specifed and directed.
65S & F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specifed and directed.
66Taking down shutters of any descriptionnot exc1 sqm each complete all as specified and as directed.
67Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and as directed.
68S&F in repair three track sliding window with two or more shutter witth 4 mm thick tinted glass, one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of"JINDAL" or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottomframe 20620 (b) Top frame & Vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock20724 (e) Shutter top & Bottom20844 (f) Glazing Clip19352
69S&F ventiltors/ louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frostedglass strips andfollowing aluminium powder coated sections conforming to catalogue of "JINDAL" or of equivalent make and rubber beading etc all as directed. (a) SP20048 (b) Glazing clips19352
70Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
71M&L for coloured Ceramics tiles 450x300x7to8mm thickin vertical surfaces such as skirting dado set & jointed in neat cementslurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces complete all as specifed and directed.
72M&L for Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specifed and directed.
73M&L for Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specifed and directed.
74M&L for renewing tiles in patches, area not exc 5 sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specifed and directed.
75Demolition and breaking of drain pipes AC /CI/PVC set in cementmortar or adhensive all as directed of 75mm to 110 mm bore complete all as specified and as directed.
76S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallor laid in floors/in earth of 110 mm bore complete all as specifed and directed.
77All as per item No 65.00 above but 75mm bore complete all as specified and as directed.
78Refixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 110mm bore complete all as specified and as directed.
79Refixing of old PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors of 75mm bore complete all as specified and as directed.
80S&F PVC (SWR) bends plain 110 mm bore complete all as specified and as directed.
81S&F PVC(SWR) bends plain 75mm bore complete all as specified and as directed.
82S&F PVC (SWR) bends with oval access door of 110 mm bore complete all as specified and as directed.
83S&F PVC (SWR) bends with oval access door of 75 mm bore complete all as specified and as directed.
84S&F PVC (SWR) of 110mm dia junction single (single "T")equal or unequal with door access complete all as specified and as directed.
85S&F PVC (SWR) of 75 mm dia junction single (single "T")equal or unequal with door access complete all as specified and as directed.
86M&L in repairs of steel grating of 100mm in size for nahni trap/floor including jointing complete all as specified and as directed.
87Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out all as specified in (Soft/loose)soil complete all as specified and as directed.
88M&L for 75mm thick PCC (1:4:8) typeD-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.
89M&L for precast cement concrete interlocking paver blocks, coloured, glossy finish with any shape and size 60mm thick, M-35 grade, laid over25mm thick stone dust/grit all as specified and as directed.
90M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection/hard standing, finishing cementconcrete surface even and smooth without using extra cement complete all as specified and directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail