}

Design, Construction, Testing And Successfully Commissioning Of Construction 0.15 Lac Gallons Rcc Oht, Pump House Cum Operator Quarter, Sluice Chamber, Chain Link Fencing Around Structures, Anchor Blocks / Saddle Blocks, Approach Path, Development, Karewa Malangpora-Jammu And Kashmir

Public Health Engineering Department-PHED has published Design, Construction, Testing And Successfully Commissioning Of Construction 0.15 Lac Gallons Rcc Oht, Pump House Cum Operator Quarter, Sluice Chamber, Chain Link Fencing Around Structures, Anchor Blocks / Saddle Blocks, Approach Path, Development. Submission Date for this Tender is 27-10-2021. Electromechanical Work Tenders in Karewa Malangpora Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

29340782
Design, Construction, Testing And Successfully Commissioning Of Construction 0.15 Lac Gallons Rcc Oht, Pump House Cum Operator Quarter, Sluice Chamber, Chain Link Fencing Around Structures, Anchor Blocks / Saddle Blocks, Approach Path, Development
Open Tender
Indian
Jammu And Kashmir
Karewa Malangpora
27-10-2021

Tender Details

Design, Construction, Testing And Successfully Commissioning Of Construction 0.15 Lac Gallons Rcc Oht, Pump House Cum Operator Quarter, Sluice Chamber, Chain Link Fencing Around Structures, Anchor Blocks / Saddle Blocks, Approach Path, Development Of Premises & Providing Laying Of G.I / D.I Pipes, Including Conducting Complete Necessary Survey, Soil Tests As Required At Selected Site, As Per The Parameters / Specifications, Electrical / Mechanical Works, Construction Of Gravel Packed / Odex Type Production Tube Well, Installation Of 140 Fhtcs For Wss Karewa Malangpora ( Jjm ) Including Free Trial Run Of Three Months After Completion Of All The Components Of Scheme In All Aspects And There After Maintenance For A Period Of One Year Which Includes 6 Months Dlp.

Key Value

Document Fees
INR 5500 /-
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Design, construction, testing and successfullycommissioning ofconstruction 0.15 lac gallons RCC OHT, pump house cum operator quarter, sluice chamber, chain link fencing around structures, Anchor blocks/Saddle Blocks, approach path, development of premises & providing laying of G.I/D.I pipes, including conducting complete necessary survey, soil tests as required at selected site, as per the Parameters/ specifications, Electrical /Mechanical works, Construction of Gravel Packed/ODEX Type Production Tube Well,installation of 140 FHTCs for WSS Karewa Malangpora (JJM) including free trial run of three months after completion of all the components of scheme in all aspects and there after maintenance for a period of one year which includes 6 months DLP.
Sl. No. Item Description
1Design, construction, testing and successfullycommissioning of RCC Over Head Tank 0.15 lac gallons capacity (shell type)with architectural features in single compartment with 20 mtrs staging height (above ground upto ring beam ) on “Turn-Key” basis atfor WSS Karewa Malangpora (under JJM)including providing and fixing of B-Class 3 pipe lines of 100mm dia for supply main, washout and overflow line with sluice valves make of VOG/AVK and all necessary accessories such as lightening arrester, water level indicator, RCC stair from ground level to tank floor levels gallery along outside columns gallery to top of dome and inside the tank with side steel railing, ventilating cowls, main hole covers with frame and M.S. railing for stair and roof flooring vertical pipe lines and standard pipe fitting for supply main and washout, overflow with 12mm thick flanged joints etc all complete. The top water container should be preferable cylinder in shape, shaft for support shall not be permitted including disposal of excavated material from the premises, boulder filling inside the tank upto ground level, cement primer, water proofing outside the tank surface whichever is required for commissioning of structures with allied works complete including connecting to pipe line
2Earth work in excavation by manual means in trenches for foundations ,drains, pipes, cables etc (not exceeding 1.5mtr in width) and for shafts ,wells ,cesspits, and the like not exceeding 10sqm on plan ,including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soils
3Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)
480 mm dia G.I pipes
565 mm dia G.I pipes
650 mm dia G.I pipes
740 mm dia G.I pipes
825 mm dia G.I pipes
920 mm dia G.I pipes
1015 mm dia G.I pipes
11Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329
12100 mm dia Ductile Iron Class K - 7 Pipes
13Making connectionof G.I distribution branch with G.I main of following size by providing and fixing tees, including cutting and threading the pipe etc complete
14(a)    25 to 40 mm nominal bore
15(b)    Above 40 mm nominal bore
16Filling available excavated earth (Excl. rock) in trenches, plinth sides of foundation etc. layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead upto 50mtr and lift upto 1.5mtr
17Providingfixing flangedjoints at bends and curves including cost of bend of required dia and lengthwith 12mm thick flangesincluding cost of nuts , bolts, washers, cutting of thread and making good for jointing including testing and commissioning all carriages head load complete (100mm dia)
18Providing fixing doubleflanges C.I sluice valves /NRV’s/Air valves of standard qualityKirlosker /vage make confirming to IS 780 of 1984 read with upto date amendments standard mark ISI make PN-1 including cost of nuts bolts IR cloth including all sorts of carriage upto site of work complete job including cost of pedestals and handles as required at site(to be paid as per actual detailswith supporting vouchers dully verified by AEE concern)
19(a)    100mm sluice valve
20(b)    NRV
21(c)     Air valve
22Providing and laying of stone solling hand packed including watering dressing and ramming all complete
23Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 mix(1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size )
24Providing and laying specified grade of reinforced cement concrete including curing but excluding the cost of centring , shuttering , finishing and reinforcement all works upto plinth level 1:2:4 mix ( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size )
25Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 mix(1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size )
26Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
27Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
28Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
29Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
30Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood
31Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Kiln seasoned & chemically treated hollock wood
32Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Kiln seasoned and chemically treated hollock wood
33Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.
34Providing fixing of hinges of different sizes , haldarwazas, latches, handles, locking arrangement to main door , locks to doors of standard quality including screws , nuts nails , all sorts of carriage complete
35Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20 mm thick top cover
36Providing and fixing ball bearing for rolling shutters
37Steel reinforcement for RCC work including straightening, cutting , bending , placing in position and binding all complete upto plinth level thermo –Mechanically –Treated barsof grade Fe-500D or more
38Centring shuttering including strutting, propping etc. and removal of form work for
39Foundation footings , bases for columns
40Lintel, beams, plinth beams, girders, bressumers and cantilevers.
41Suspended floors, roofs, landings, balconies and access platforms
42Edges of slabs and breaks in floors and walls Under 20 cm wide
43Columns, pillars, piers, abutments, posts and struts.
44Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc
4512mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
46Providing and fixing of sanitary itemsof standard quality like 1000 liters sintex , W.C Indian type , flush tank , with all accessories . pvc pipe , pipe specials , C.P items , p trap , floor trap, bends , steel sink , connecting with soakage , whichever be necessary to make functional all complete (to be paid as per actual details /measurements with supporting voucher dully verified by AEE concern)
47Provision for Construction of septic tank (12x8x6 of size ) with brick masonry in 1:3 mix including providing laying of RCC slab in 1:1.5:3 mix , with cement plaster of 1:3 mix including P Trps , bends , PVC prince-B class pipe ,disposal of excavated earth outside the premises , including M.S iron cover for man hole complete (to be paid as per actual details / measurements )
48Providing fixing supplying P.C.C rings including earthwork excavation and disposal of surplus excavated material outside the premises including providing and laying cement concrete in 1:2:4 mix over septic tank and soakage pit . construction of man hole chambers with angle iron frame and covering arrangements .providing fixing of P.V.C pipe ( prince make B class ) including bends whichever is required at site or as per directions of Engineer- in- charge (3 compartments for septic tank and 1 for soakage pit. (to be paid as per actual details /measurements )
49Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
50Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
51Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter
52Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
53Providing ,supplying fixing instillation of electric fittings of standard qualityincl. 19/18 copper wire cable connection with transformer , instillation of panel board, switch board, switches, lighting points, heating points, fans , exhaust fanspvc conduit, havels wire, MCB, changeover , whichever is related to the item and found necessary at site or as per directions of Engineer- in- charge(to be paid as per actual details /measurements with supporting vouchersdully verified by AEE concern )
54Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all completeWelded
55Providing corrugated G.S sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks , bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I filled with white lead , including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horiziontal / vertical or curved surface ) excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required 0.63mm thick with zinc coating not less than 275gram/sqm
56Providing and fixing plained eaves boarding. 250x32 mm (nominal size )
57Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete .with0.63 mm thick with zinc coating not less than 275 gram/m2
58Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
59Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
60Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
61Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
62Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer incharge. Made of G.I. wire of dia 4 mm
63Steel work welded in built up sections/framed work, including cutting, Hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
64Applying priming coats with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/ steel works
65Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, Lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :
66Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 ton capacity in stages to proper grade and camber, applying and booming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
67Supplying and stacking at site Graded crushed stone aggregate of size
6863 mm to 45 mm
6953 mm to 22.4 mm
70Supplying and stacking at site Graded crushed stone aggregate of size
7113.2 mm nominal size (Type A)
7211.2 mm nominal size (Type B)
73Supplying and stacking of crusher dust (as a binding material including spreading over surface and carriage complete job )
74Carriage of WBM upto site avg lead 10km
75Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
76Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)
77Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)
78Provision for soil test dully vetted by Design Director Quality Control and Inspection Division Srinagar/ Jammufor the complete scheme (for detailed technical specifications refer the detailed ENIT)
79Provision for face lifting of scheme including painting priming ,beautification of site whichever is required at site complete job
80Carriage of material from source of site upto site of work by mechanical transport including loading unloading stacking at site complete
81Sand and Bajri avg lead 15km
82Cement and steel avg lead 15km
83Stone solling avg lead 15km
84Bricks avg lead 26km
85Good earth avg lead 10km
86Fabrication, Providing and fitting of Modular Control Panel (for detailed specifications refer Annexure A of Tender Document)
87Providing, fitting, testing and commissioning of voltage controller (for detailed specifications refer Annexure A of Tender Document)
88Providing, Installation, testing and commissioning of Automatic power factor correction panel for improvement of power factor (suitable for 7.5-12.5 HP Motor rating) (for detailed specifications refer Annexure A of Tender Document)
89Providing and Fitting of 10 sq. mm, 3 core flat submersible cable for interconnecting of various electrical gadgets through proper system including thimbles of appropriate size including all thimbles crimping taping etc. (L&T or Havells make)
90Main Service Line: Providing / Fitting of 50 mm Sq. 3.5 core, XLPE Armoured Al. Cable conforming to IS: 7089 part 1st as service line from the HT transformer to control panels through the changeover arrangement for proper operation of both DG set and Power supply as per requirement including all thimbling crimping taping etc. Havells make. NOTE: - The cable terminal ends for connection to switchgear at various requisite points shall be Al. Thimbles of dowel’s make and of appropriate size and connected by hydraulic crimp tool only.
91Internal Cabling: Providing and Fitting of 19/18 copper cable for interconnecting of various electrical gadgets through proper system including thimbles of appropriate size including all thimbles crimping taping etc.
92Providing/Fitting of100 mm width Steel perforated cable trays along with duct ,bends for accommodating interconnection cables
93Providing and erection of 9 Mtr. long Hot Dip Galvanized octagonal pole (single Section) with bottom 150 mm, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection(for detailed specifications refer Annexure A of Tender Document)
94Providing installation testing and commissioning of area lighting 120 Watt LED (Street Light Type)(for detailed specifications refer Annexure A of Tender Document)
95Providing Laying and connection of 2Cx10 mm² XLPE Aluminium Armoured Cable from the connector of high mast pole to the stabilizer. The job includes underground laying or overhanging as per requirement and directions of the site in charge. Make: Havel’s/Gloster.
96Providing & Fitting of 1200mm sweep Orient/Bajaj/Havells/Anchor make ceiling fan with 1.5mm2 Cu wiring as per site requirement complete in all respects like hook for holding the fan, tape, fan dimmer switch etc. Preferred colour is Dark Brown
97Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter (Make: Microtek/Luminous) including Providing / Installation of 12V, 180AH Tubular inverter Battery with trolley and cover. (Make: Amaron /Exide) with 2-core 6mm2 Cu wiring as per site requirement along with other accessories like SS-Combine (02 No’s), 3-pin plugs etc. of reputed make for proper fitment and installation of the item.
98Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. The mats shall be as per IS 15652:2006 & shall have the following specifications: - Composition: Rubber (synthetic mats for electrical purpose) Thickness: - 2.5mm Size: - 1M wide. Make: - Safe Volt/Jyoti The rubber mats shall be accepted with manufacturers test certificate.
99Providing, Installation, Testing and Commissioning of oil immersed naturally air cooled (TYPE ONAN)(for detailed specifications refer Annexure A of Tender Document)
100Providing, erection of 9 m long M S Tubular poles of designation 410 SP-33 and fitted with (450x450) mm size M.S plate at the bottom. The job also includes spiral earthing, painting of poles in silver colour, grouting of poles in CC blocks of (M-20 mix). P/F of danger plate indicating (11000V-DANGER), barbed wire, nuts and bolts of assorted size, with polymer insulators as per site requirement. The job is inclusive of providing and fitting of brace (1000x40x5) mm and cross arm (ISMC 75, 1.5 m long) including screwed fasteners as per site requirement for holding of 11 KV polymer insulators.
101Providing, laying, testing and commissioning of 0.03 ACSR conductor to serve as HT line from HT tapping source to substation.
102Providing/ Fitting/Testing and commissioning of 11 KV lightening arrestor set (station type) as per REC standard conforming to IS 3070 Part III. Test certificate from the Manufacturer must be produced on delivery of the item.
103Providing/ Fitting/Testing / Commissioning of 11 KV G.O link set (3 pieces) of reputed make as per REC Standard including Pipe of suitable Length & diameter for its operation. The job is inclusive of P/F of 75x40 mm MS Channels required at site for its installation Test certificate from the Manufacturer must be produced on delivery of the item.
104Providing/ Fitting/Testing and commissioning of drop out Fuse Set with polymer insulators (Horn –Gap type) suitable for 11 KV line as per REC Standard F6. Test certificate from the Manufacturer must be produced on delivery of the item.
105Alternate Power Arrangement (25 KVA Air-cooled Diesel Generator Set) (for detailed specifications refer Annexure A of Tender Document)
106PCC Foundation and canopy for DG Sets(for detailed specifications refer Annexure A of Tender Document)
107Providing and laying of stone soling hand packed in horizontal including carriage of 06 Kms, leads, lifts etc.(for detailed specifications refer Annexure A of Tender Document)
108Providing and laying of 6 inch PCC of 7.5 mix as mud mat including carriage, leads and lifts. =2x(10’+8’)x2’-0”x0-’6’’ = 36 cft = 1.02 cum
109Providing and laying of P.C.C in 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) including carriage, leads and lifts.(for detailed specifications refer Annexure A of Tender Document)
110Providing and laying of shuttering/centering including propping, strutting etc. =(2x10’+2x8’+2x10’+2x8) x2’ = 144 sft =13.38 m2
111Providing and laying of 6mm thick cement plaster of 1:4 mix including carriage. =2’x8’+2x10’x2’+2’x1/2x8’x6’=104 sft = 9.66 m2x
112Supply and fabrication of canopy including vertical posts, horizontals, truss etc. The fabrication work shall be done by a skilled labour and welding work should be of standard quality(for detailed specifications refer Annexure A of Tender Document)
113Colour coated CGI (Roofing, ridges): 24SWG gauge =2x(12’x8’) =192 sft= 17.84 sq.m. Cost on account of J-hooks, washers etc. is included in the scope of work.
11418SWG gauge plain ,Ridge=1’x15’-0”=15 sft
115Providing, fabrication and fitting of welded MS wire mesh (0.50 sq. Inch and 1.40 mm wire dia.) for walls and gables of the canopy.
116Painting of whole MS Frame works including angle iron structure, wire mesh etc. with two coats of red oxide and two coats of enamel paint after thorough surface cleaning by using proper grade of emery paper.
117Providing/supplying of G.I flanged Rising Main for Water Supply Scheme(for detailed specifications refer Annexure A of Tender Document)
118Laying, fitting, testing and commissioning of 80 mm dia.C- class GI pipe line including earth work excavation inrock and mud by means of mechanical machinery for laying of pipe line /rising main in trenches and as per gradient and site condition/requirement .The job shall include fitting of offsets, bendsincluding all leads and lifts involved in laying of pipes as per site requirement .The average depth shall be 500 mm(approx.) and width 450mm (approx.) over a length of 100M .The job also includes back filling in the trenches and deposition of excess soil suitably as per the directions of the site in charge.
119Fabrication, providing & fitting of 65 mm dia. (Class – C) Flanged GI column pipes each of 10 rft. length, the Job includes the cost of 16 mm thick MS flanges and welding in two layers to make the flanged joint strong and leak proof. The pipe of 10 ft. length is to be welded on both sides with flanges of standard size with Advani /Adore electrode (Advani Oerlikon make). The job also includes all types of skilled labourers, power supply diesel generator etc. required for the job, with suitable size nuts bolts RI Cloth in the flanged joints of column pipes.
120Fabrication and fitting of delivery flanged piping arrangement with wash out manifold fabricated out of 65 mm pipe (12 mtr) P/F of Flanged Tee (1-nos) made out of 65 mm dia. G.I. pipe class “C” as per specifications mentioned above. The flange thickness shall be 16 mm and as per IS – 6392. Job includes P/F of 65 mm dia. Sluice Valve VAG make & M16 flange bolts / nuts chrome plated for connecting the pumping unit with the delivery Manifold.
121Fabrication, providing and fitting of split type MS Clamps 18mm thick for lowering of column pipes and holding of pumping unit after lowering. The job includes the cost of required size of nuts and bolts.
122Providing, Fitting, Testing and Commissioning of 80 mm Nominal Diameter, Ductile Iron, VAG make EKO Plus Gate Valve of ratingPN 10 (for detailed specifications refer Annexure A of Tender Document)
123Providing, Fitting, Testing and Commissioning of 80 mm Nominal Diameter, Ductile Iron, VAG make, RETO – STOP Non Return Valve of rating PN 10.(for detailed specifications refer Annexure A of Tender Document)
124Over Head Gantry (for detailed specifications refer Annexure A of Tender Document)
125Providing/ Fitting/ fitting of Monorail / Hoist manually operated provided with necessary gear train & hardened steel wheels along with chain pulley block(for detailed specifications refer Annexure A of Tender Document)
126Supply, Installation, Testing & Commissioning of Submersible Pumping Equipment(for detailed specifications refer Annexure A of Tender Document)
127Fabrication, providing and fitting of MS hopper for proper feeding of gravels to the bore well and MS platform/motor stool to bear the load of well casing, pumping unit, column pipes etc. for smooth operation of the pumping unit (for detailed specifications refer Annexure A of Tender Document)
128PCC foundation around well casing: (for detailed specifications refer Annexure A of Tender Document)
129Providing, Laying of cement concreteblock of size 8 feet x 6 feet x 1½, feet in 1:2:4 mix surrounding Gravel Hooper .The job includes excavation cost, form work, shuttering costs ,transportation, head loadcost etc.
130Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two coats on all items viz. Delivery manifold, MS gantry, gravel Hooper.
131Providing and Fabrication of 6’-6” x 6’-0” size MS angle Iron Framed worker’s sleeping bed made out of ISA 50 mm x 50 mm x 6 mm. The job shall include four no of legs 1’-6’’ long made out of equal iron ISA 50 mm x 50 mm x 6 mm with braces of MS flats 50mm x 4 mm, 2 no. (1’-0” Long) for each leg and for central support,3 nos’ (6’-0” long each) to be welded precisely with Advani electrodes as per requirement.3 Job also includes P/F of 19 mm ply board of 6’-6” x 6’-0” size.
132Providing of tool kit comprising of Flat Spanner 14-27 No (07 Pieces), Ring spanner set 14-27 No (07 pieces), 10” screw Driver, Plier, the tools shall be of Tap aria /Ambika make Provided in canvas bag. The Job also Includes Providing of Chargeable lantern of Andslite make 01 no. ,05 no PVC chairs Prima /Cello /Neel kamal make, ,15 ltrs Bucket & mug, ,3 Ltrs. pressure cooker, 3 ltrs Rice Cooker ,3no steel plates & glasses,
133Providing/Supply 10 mm Thermo cool & Excel matting for operators quarter of 12’x14’size,bedding for the operators quarter including02 no quilts,)2 no mattress 02 no.blankets,02no pillows,
134Providing of bamboo ladders 18 feet long along with 15 feet long Link rods and HT Glove pair.
135Providing and fitting of sign boards on sheet metal with proper frame work with blue back ground & written in white. As per requirements. (for detailed specifications refer Annexure A of Tender Document)
136Providing and fitting of 01 No. LED (scroll type) sign board fabricated out of stainless steel and metal showing the names of water supply scheme and the Department. Size:5’×1’6”
137Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m in all kinds of soil. 1x18’x18’ = 324sft = 30.11 sq.m
138Earth work in excavation by mechanical means (Hydraulic excavator) over areas exceeding 30cm in depth, 1.5mtr in width as well as 10 sq.m on plan including disposal of excavated earth, lead up to 50m and lift up to 1.50 m, disposed earth to be levelled and neatly dressed.2x(17’+15’)x2’x3’ + 1x15’x2’x3’ = 474 cft
139Providing and laying of stone soling hand packed in horizontal including carriage of 06 Kms. 2x(17’+15’)x2’x0’-6”+1x15’x2’x0’-6”+1x14’x14’x2’-0”= 275 cft
140Providing and laying of 6 inch PCC of 7.5 mix as mud mat including carriage. 2x(17’+15’)x2’x0’-6” + 1x15’x2’x0’-6” = 79 cft
141Providing and laying of P.C.C in 1:2:4 mix (M 15) including carriage, all leads and lifts. The job includes dressing of slab, fixing of Angle iron anchors for framework, curing, formwork etc.2x(18’+15’)x2’x2’ +1x15’x2’x2’ = 324 cft
142Providing/laying of Shuttering/centering including propping, strutting etc. 2x[2x(5.18m+4.57m)]x0.6m+2x3.35mx0.6m
143Providing/laying of 6mm thick cement plaster of 1:4 mix including carriage, all leads and lifts. (for detailed specifications refer Annexure A of Tender Document)
144Mechanical works: Fabrication of MS framed structure for PUF panelling . (for detailed specifications refer Annexure A of Tender Document)
145PUF Enclosure (Walls, Ceiling and ridges): It shall be made up of 60 mm thick rigid PUF, CFC free with profile surface on one side, conforming to IS-12436-88 with subsequent amendments having density of 40±2 kg/m3 sandwiched between 0.5 mm pre-painted Galvanized steel sheet as per IS-14246-95 with subsequent amendments with 18-20 microns of Exterior Polyester Coating of white color on epoxy primer on both sides. The basic substrate shall be Gr-120 Hot dip Galvanized steel. The panels shall be made by continuous line and shall be joined together by means of Tongue-n-groove joint system. The joints shall be air-tight by using proper sealant (like silicon PU foam etc). The PUF panels shall have closed cell content of 90-95%; Thermal Conductivity of 0.023 at 10W/mK; Compressive strength of 2.1 Kg/m2 9 (at 10% deformation); Water vapor permeability 0.08-0.12 gm/h_m2; Self-extinguishing fire property. (for detailed specifications refer Annexure A of Tender Document)
146Eaves boarding (8inch)(for detailed specifications refer Annexure A of Tender Document)
147Color coated CGI Roofing (24SWG gauge). (for detailed specifications refer Annexure A of Tender Document)
148PRidge (for detailed specifications refer Annexure A of Tender Document)
149P/F of Anchorage mechanism made up of MS plates 08 mm thick required for anchorage of vertical posts, Horizontals, truss works complete. The jobs include cutting/welding works to be carried out as per site requirement. (for detailed specifications refer Annexure A of Tender Document)
150Painting of whole MS Frame with two coats of red oxide and two coats of enamel paint after surface cleaning by using proper grade of emery paper.
151Providing/laying of 6mm thick cement plaster of 1:4 mix including carriage, all leads and lifts. (for detailed specifications refer Annexure A of Tender Document)
152Providing/laying of 6mm thick cement plaster of 1:4 mix including carriage, all leads and lifts. (for detailed specifications refer Annexure A of Tender Document)
153Providing/laying of 6mm thick cement plaster of 1:4 mix including carriage, all leads and lifts. (for detailed specifications refer Annexure A of Tender Document)
154Providing/laying of 6mm thick cement plaster of 1:4 mix including carriage, all leads and lifts. (for detailed specifications refer Annexure A of Tender Document)
155Providing/laying of 6mm thick cement plaster of 1:4 mix including carriage, all leads and lifts. (for detailed specifications refer Annexure A of Tender Document)
156Providing/laying of 6mm thick cement plaster of 1:4 mix including carriage, all leads and lifts. (for detailed specifications refer Annexure A of Tender Document)
157Providing/laying of 6mm thick cement plaster of 1:4 mix including carriage, all leads and lifts. (for detailed specifications refer Annexure A of Tender Document)
158Construction of production tube well(for detailed specifications terms and conditions refer Annexure G of Tender Document)
159Providing , Lowering and fitting (for detailed specifications terms and conditions refer Annexure G of Tender Document)
160For 300 mm dia MS Blind Pipe
161For 300 mm dia MS Slotted pipe
162Providing and Shrouding of Pea Gravel as per IS : 4097 – 1967, of assorted size aroundannular space between the casing pipe and the well surface has to be filled with a gravel pack to act as a filter medium. (Quantity shall be subject to the actual measurements at site)
163Development of Tube Well(for detailed specifications terms and conditions refer Annexure G of Tender Document)
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail