Bids Are Invited For Excavation In Hard Soil - Earth Work Excavation Of Small Tank Foundation For In Different, Different Excavation Sizes Conduits Either In Pits Above In Soft Soil Not Exceeding 1’ 6”In Depth Incl The Bottom & Sides Of Pits & Trenches -Karnataka

Bids Are Invited For Excavation In Hard Soil - Earth Work Excavation Of Small Tank Foundation For In Different, Different Excavation Sizes Conduits Either In Pits Above In Soft Soil Not Exceeding 1’ 6”In Depth Incl The Bottom & Sides Of Pits & Trenches As Per Design & Direction Of Engr Incharge , Boulder Soling - Filling In Foundation With Sand And Granite Boulders Of 100 Mm To 150 Mm In Foundation Incl Watering Tamping Etc. Complete As Per Design, Specification And The Direction Of The Engr Incharge , Plain Cement Concrete ( 1:4:8 ) - Providing And Laying In Position Reinforced Cement Concrete Of Mix 1:4:8 & Down Size Graded Granite Metal, Machine Mixed, Concrete Laid In Layers Not Exceeding 6” Thick As In Drawing & As Directed By Engr Incharge , Masonry Works - Providing And Constructing ( Burnt ) Brick Masonry With Approved Quality Of Modular Bricks Ground Moulded Of Standard Size Of Class Designation 9” Thk With Cement Mortar 1:6 For Basement & Sub Structure With Cost Of Materials, Labour, Charges, Scaffolding Etc As Per Design & Direction Of Engr In Charge , Inside Plastering In Cm 1:4 - Providing & Finish Plaster To Walls In One Coats The Cost Of 14 Mm Thk In Cm 1:4 And Finishing Coat Of 6 Mm Thk In Cm 1:3 Using Coarse And Including Providing An Curing Etc, Comlete As Per Design &Direction Of Engr In Charge , Excavation In Hard Soil For Barbed Fence - Earth Work Excavation For Foundation Of Angle 16Mm Thick Conduits Either In Pits Above In Width In Soft Soil Not Exceeding 1.1V Mts In Depth Incl The Bottom & Sides Of Pits & Treaches 54 Nos Angles , Rcc Footing M20 -1:1.5:3 - Providing And Laying In Position 54 Nos Angle Cement Concrete Of Mix 1:1.5:3 & Down Size Graded Granite Metal, Machine Mixed, Concrete Laid In Layers Not Exceeding 20”. , Steel Work 1 - M & L For Fixing Angles Slottes Of 2” X 2” Of 5Mm Thickness Height 8 Ft Above The Ground Level At The Distance Of Every 10 Ft , Steel Work 2 - M & L For Fixing Of Barbed Wire Of 4 Guage Thickness & 6 Stans On Pole To Pole And Asdirection Of Engr In Charge For A Area 180 X 90 Ft , Steel Work 3 - M & L For Painting Of Angle With Primer And 2 Coats Of Synthetic Enamel Paint Total Quantity : 1

Refer document

Refer document

Refer document