Forest Department-FD has published Construction Of Mali Hut At Rakhchildran Pulwama Construction Of Mali Hut At Rakhchildran Pulwama. Submission Date for this Tender is 07-10-2021. Shed Construction Tenders in RAKHCHILDRAN PULWAMA Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Oct-2021 | DATE EXTENSION | Date | 07-10-2021 |
| Sl. No. | Item Description |
| 1 | Contruction of mali Hut at Rakhchildran (pulwama) ofSocial Forestry Division Pulwama. |
| 2 | Earth work in excavtion by mannual means in trenches, for foundationdrains, cables, soakage pits, septic tanks etc. including dressing of sides and ramming of bottoms, etcand getting out the excavated earth and disposal of surplus excavated earth as directed indcludingall leads lifts etc. completed job in all kinds of soil. |
| 3 | Supplying and laying dry stone soling (hand packed including rammingdressing all leads lifts and carriages etc complete job. |
| 4 | Providing & laying in position cement concerete 1:4:8 (1 cement 4 coarse sand : 8 graded 40 mm normal sizeincluding curing but excluding cost of centring and shuttring (All work upto plinth level) inculding all carriages upto site of work. |
| 5 | Providing & laying in position cement concerete 1:3:6 (1 cement 3 coarse send : 6 graded stone agg, 20 mm nominal sizeincluding curing but excluding the cost of centering and shuttering (All work upto plinth level)inculding all carriages upto site of work. |
| 6 | Providing & laying in position reinforced cement concerete 1:2:4 (1 cement 2 coarse send : 4 graded 20 mm nominal sizeincluding curing but excluding thecost of centring and shuttering finshing and reinforcement incuilding all carriages |
| 7 | Centering and shuttering including strutting, propping etc and removal of same in foundations, plinth suspended floors lintels, plinth beams etc. |
| 8 | Supplying and laying of sand Nallah muck in plinth including ramming and carriages upto site of work complete job. |
| 9 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation plinth and in super structure above plinth level upto floor five level including curing and all leads lifts and all sorts of carriage upto site of work in cement morter 1:6 (1 cement :6 coarse send ) |
| 10 | Providing & laying50 mm thickcement concerete flooring in 1:2:4 (1 cement 2 coarse send : 4 graded stone agg12.5mmnominal sizeincluding curing complete. |
| 11 | Steel reinforcementfor R.C.C. Work including straightening cutting bending placing in position and binding all complete (Mild Steel and medium tensile bars) |
| 12 | Providingand fixing 40x5mm thick flat iron hold jasts 40 cm long induding fixing to frame with 10 mm dia bolts, nuts and wooden pluges and embedding in cement conceret block30x10x15 cm1:3:6 mix (1 cement :3 coarse sand 6 graded stone agg.20 mm nominal size |
| 13 | Providing wood work in frames of doors windows clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length hold fast lugs or with dash fasteners shall be paid for scpartely II class kail wood |
| 14 | Providing and fixing panelledor panelled and glazed shutters for doors windows and clere story windows fixing with butt hinges of required size with necessary screws excluding panclling which with be paid for separetly all complete as per the directions of Engineer incharge (II class kail wood ) |
| 15 | Providing and fixing 30 mm thick wire gauze shutters using gavanished MS wire gauze of avg. Width for operture 1.4 mm with wire of dia 0.63 mm for doors windows and clere story windows including ISI marked bright finished or /and black enamelled MS butt hings with necessary screws II class kail wood) |
| 16 | Providing and fixing panelling or panelled and glazing in panclled or penclled and glazed shutters for doors windows and clerestory windows (Area of opening for panel inserts excluding portion inside groves or rebates to be measured panelling for panelled or panelled and glazed shutters25mm to 40 mm thick |
| 17 | Particle Boardd 12 mm thck prelaminated particle board with decoraive lamination on both sides |
| 18 | 4mm thnk glass panes weight not less than 10 Kg /sqm/ |
| 19 | Providing hoisting and fixing trusses /purlins /rafters/posts /post plates or like componente including cost of screws etc complete Ist class popular wood |
| 20 | Providing and fixing truss bolts 350 mm long full threaded |
| 21 | Providing and fixing of pre coated Iron profileCGI Sheets cloured sheet roofing size shape and pitch of corrugation as approved by engineer incharge) 0.50 mm (+0.05% ) total coated thickness with zinc coating 120 gms per sqm aspc IS-277 including cost of screws ((J or L hooks ) etc.compete job. |
| 22 | Providing and fixing ridges or hips coloured 0.5 mm thick including cost of screws etc complete |
| 23 | Providing and fixing of G.I. eaves boarding coloured including cost of screwa nails etc |
| 24 | Providing and fixing of G.I.sheets coloured panclling type in soffts etc. Including cosst of nails etc. |
| 25 | Providing and fixing wood work in rough celing including frame work popular wood 20 mm thik planks |
| 26 | 15mm plaster on walls in 1:6 (1 cement :6 fine sand |
| 27 | 12 mm plaster on walls conc.walls in 1:4 cement mortor (1 cement : 4 fine sand including finishing with meat coat of cement slurry |
| 28 | Providing and fixing 10 mm thick ply wood in celiing including cost of nail etc. |
| 29 | Finishing walls with 2 mm thick wall putty of standard quality Birla wall putty or equalent |
| 30 | Providing and fixing of following aluminum fittings of standard quality (1si marked including screws etc. Complete job. |
| 31 | Tower bolts 150 mm |
| 32 | Tower bolts 100 mm |
| 33 | Handles 200 mm |
| 34 | Handles 150 mm |
| 35 | Handles 100 mm |
| 36 | L-drop 300 mm |
| 37 | Door stoper |
| 38 | Painting two or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade including applying of priming coat of approved brand and manufacture on woodd and wood based surfaces including sand paperining etc. |
| 39 | Distempering with oil bound washable distemper of approved brand and manufacture to give anto given an even shade on new work (Two or more coats )over and including priming coat with water thinable cement primer |
| 40 | Finishing walls with water proofing cement paint of required shade on new work two or more coats applied |
| 41 | Providing and fixing 1st quality ceramic glazed wall /floor tiles of minimum thickness 5mm of approved make in all coloum and shadeds in cement mostar 1:3 (1 cement : 3 five sand including filling of joints with white cement etc complete job |
| 42 | Sanitary work (Including all sorts of carriage) |
| 43 | Providing and fixing of w.c.pan (Indian type) of approved make (China ware) |
| 44 | Providing and fizing of low level flushing cistern (8 -10 litre) PVC of stand make |
| 45 | Providing and fixing offlat back wash basin with pedastal of standard make |
| 46 | Providing and fixing of following C.P fitting of approved make and ISI marked |
| 47 | C.P.angle value |
| 48 | Towel ring |
| 49 | C.P.Soap case |
| 50 | C.P.Bib cock |
| 51 | C.P.Basin mixer |
| 52 | C.P.Wall mixer |
| 53 | Kitchen Sink |
| 54 | Sink mixer |
| 55 | Looking mirror |
| 56 | Providing and fixing of 100 mm dia PVC pipes of approvedd make prince or equalent |
| 57 | Providing and fixing of 75 mm dia PVC (pipes of approved make (prince or equalent) |
| 58 | Providing and fixing of concealed G.I.pipes (Light grade class C) of approved make including fittings |
| 59 | Providing and fixing of 20mm dia G.I. Pipe (light grade class C ) of approved make including fittings |
| 60 | Providing and fixing of 15 mm dia G.I union |
| 61 | Providing and fixing of tripple layer PVC water storage tank including all fittings and fixtures complete 500 litre capacity |
| 62 | Providing and fixing following electric installations passing through PVC channels /conduits in 3/20, 7/16 or 7/20 wire of approved make includiing cost of channells conduits and all required accessories/parts nails wiring etc and labour charges complete job for below mentioned items. |
| 63 | Lighting points (1.50 mm sq wire) |
| 64 | Lighting circuits (2.50 mm sq wire ) |
| 65 | Heating points with SS combine /5ap(4mm wire) |
| 66 | Three pin socket |
| 67 | Fan points |
| 68 | 18 way Iron D-Box |
| 69 | 16-32 Amp MCB |
| 70 | MCB-dp 63 Amp |
| 71 | Service line (7/16 wire |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
