Power Development Department has published Screation Of Sub Stations At Block Tangmarg Under Back To Village 3 Creation Of Sub Stations At Block Tangmarg Under Back To Village 3. Submission Date for this Tender is 30-09-2021. Substation Tenders in Creation of Sub Stations at Block Tangmarg Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supply,Transportation, Testing, Commissioning & Erection ofS.T Poles 9 m long (410-SP 33) complete with pit excavation , refilling the pit with soil and boulders. |
2 | Supply,Transportation, Testing, Commissioning & Erection of S.T Poles 8 m long (410-SP 15 complete with pit excavation , refilling the pit with soil and boulders |
3 | Painting of HT/LT poles with one coat of redoxide and two coats of Aluminium paint of standard quality. |
4 | Supply,Transportation, Testing & Commissioning of 100 KVA 11 KV/0.433V 3-Phase Distribution transformer Level 2 |
5 | Supply,Transportation, Testing & Commissioning of 63 KVA 11 KV/0.433V 3-Phase Distribution transformer Level 2 |
6 | Supply, Transportation, Carriage, Laying , stringing, tensioning and binding of 0.05 Acsr conductor , including joints by PG clamps wherever required. |
7 | Supply, Transportation, Carriage, Laying , stringing, tensioning and binding of 0.03 Acsr conductor , including joints by PG clamps wherever required. |
8 | Supply and installation ofGapless Surge Arrester,9KV,10KA with ( Polymer) housing station type |
9 | Supply and installation of 11 KV, G.O AB Switch , 3-Phase, 200A |
10 | Supply and installation of 11 KV, Horn, GapFuse 3-Phase 100A |
11 | Supply, and fixingof GI channel ""V"" cross arm (75x40x40x6mm) ,withGi angle pole topbracket (50x50x6mm) including back clamps of 50x8mm for fixing v cross arm and pole top bracket with making holes with ST poles as per REc standard |
12 | Supply and errection of fabricated 9ft long GI channel X-arm of 75x40x6mm inculding back clamps/ collar clamp of 50x8mm dully drilled with installtaion of GI nuts and bolts , washers without making holes in the ST pole for instaltion as per REC standards |
13 | Supply and fixing of fabricated 10ft long GI angle iron transformer belt 50X50x6mm including back clamp 50x8mm. The angles are boted with 1.5ft angle iron |
14 | Supply and fixing of fabricated 9ft long GI channel X- arms of 100x50x6mm inculding back clamps of 50x8mm dully drilled with installiation of GI nuts , washers without making holes in the ST poles for installation as per REC standards . Thechannels are to be bolted with 1.5 ft channeliron fittedwith back to back with GI nuts & Bolts for palcement of trasformer. |
15 | Supply & fixing ,testing, commissioning of 11 KV Disc Polymer Type. Insulators 45 KN with fittings as per REC specification. |
16 | Supply & fixing, testing ,commissioning of LT shackle Insulators 16 KN with GI U Clamps as per REC specification. |
17 | Supply and fixingof 3 No Sub Station earthing by GI Pipe 40mm or GI Rod 20mm, 2.5mtr long through GI Strip of 50x6 for neutral earthing and 25x3 mm for 2 transformers body earth , 1 no LAEarth and 1 no . GO handle earth. |
18 | Supply & installation ,testing , commissioning of11 KV Pin Insulators (porcelain/Polymer) with pins 5KN as per REC specifications. |
19 | Supply, Fixing, testing& commissioning ofUn Armoured, 185mm² 1-core PVC 1.1 KV grade aluminium cable FRLS type.( Standard make ) |
20 | Supply &fixing of G I nuts and bolts of sizes |
21 | Supply and faxing of HT pole Earthing completed by GI pipe 40mm by GI Road 20mm 2.5mtr long through GI Strip (25x3mm) to each pole. |
22 | Supply and fixing of LT pole Earthing completed by GI Spiral Earthing 8 SWG 115 turn as per REC Standard J-1 drawing |
23 | Cement bottoming of S.T poles in 1:2:6 mix1/6th of the height ofpole below the ground and 1ft above the ground cylnerical shapewith circularradius9” from the pole centre) using 40mm crushed stone aggregate mix. As per DrawingPit ( 600x600x1600) |
24 | Supply and laying of Guy Wire 7 SWG with turn buckle complete as per REC standard |
25 | Supply and fixing of Danger plates of HT/LT Poles with clamps |
26 | Supply and fixing of anti-climbing devices for HT/LT poles with clamps |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail