Rate Contract For Providing And Fixing Of Removable Raised False Access Flooring Rate Contract For Providing And Fixing Of Removable Raised False Access Flooring , Providing And Fixing Of Removable Raised / False Access Flooring With System And Its Compo, Sanat Ghar Bemina-Jammu And Kashmir

Rate Contract For Providing And Fixing Of Removable Raised False Access Flooring Rate Contract For Providing And Fixing Of Removable Raised False Access Flooring , Providing And Fixing Of Removable Raised / False Access Flooring With System And Its Components Of Approved Make Of Different Plenum Height With Possible Height Adjustment Upto 50Mm Comprising Of Modular Load Bearing Floor Panels Supported On G.I Rectangular Stinger Frame Work And G.I Pedestal Etc All Complete, As Per The Architectural Drawings As Specified As Directed By Engineer-In-Charge Consisting Of : A. Providing At Required Spacing To Form Modular Framework, Pedestals Made Out Of Gi Tube Of Thickness Minimum 2Mm And 25Mm Outer Diameter, Fully Welded On To The Gi Base Plate Of Size 100Mmx100mmx3mm At The Bottom Of The Pedestal Tube, Gi Pedestal Head Of Size 75Mmx75mmx3.5Mm Welded With Gi Fully Threaded Stud 16Mm Outer Diameter With Two Fi Check Nuts Screwed On The Stud Of Level Adjustment Upto 50Mm, Locking And Stabilizing The Pedestal Head In Position At The Required Level. The Pedestals Shall Be Fixed To The Subfloor ( Base ) Through Base Plate Using Epoxy Based Adhesive Of Approved Make Or The Machine Screw With Rawl Plug. B.Stringers System In All Steel Construction Hot Dipped Galvanized Of Rectangular Size 570X20x30x0.80Mm Thick Having Holes At Both Ends For Securing The Stringers On To The Pedestal Head Using Fully Threaded Screws Ensuring Maximum Lateral Stability In All Directions, The Grid Formed By The Pedestal And Stringer Assembly Shall Receive The Floor Panel, This System Shall Provide Adequate Solid, Rigid Support For Access Floor Panel, The System Shall Provide A Minimum Clear Uninterrupted Clearance Between The Bottom Of The Floor For Electrical Conduits And Wiring Etc All Complete As Per The Architectural Drawings As Specified And As Directed By The Engineer-In-Charge. C. P&F Of Access Floor Panel Of 600X600x32mm Medium Grade Filled Steel Anti Static High Pressure Lamination Of 800H Grade ( Fs800h ) . Access Floor Panel Shall Be Steel Welded Construction With An Enclosed Bottom Pan With Uniform Pattern Of 64 Hemispherical Cones. The Top And Bottom Plates Of Steel Gauges: Top 0.6Mm And Bottom 0.7Mm Fused Spot Welded Together ( Minimum 64 Welds In Each Dome And 20 Welds Along Each Flange ) . The Panel Should Be Corroresist Epoxy Coated For Lifetime Rust Protection And Cavity Formed By The Top And Bottom Plate Is Filled With Pyro Grip Non-Combustible Portland Cemetitious Core Mixed With Lightweight Foaming With Anti-Static High Pressure Laminate With Non Warp Technology Upto 1Mm Thickness For Superiors Adhesion And Surface Flatness Within 0.75Mm. The Panel Is To Withstand A Concentrated Load Of 363 Kgs Applied On Area 25Mmx25mm Without Collapse In The Center Of The Panel Which Is Placed On Four Steel Blocks. The Panel Will Withstand And Uniformly Distributed Load ( Udl ) Minimum 1250Kg / Sqm And An Impact Load Of 50Kg All Complete As Per The Approved Manufacturers Specification And As Per The Direction Of Engineer-In-Charge. All Specification Must Be Printed On The Side Of The Panel To Ensure The Quality Of The Product. 450Mm Finished Floor Height ( Ffh )

INR 25 /-

INR 5000.0 /-

Refer document