New Okhla Industrial Development Authority-NOIDA has published Maintenance Of Water Supply ( Two Year Repairing Of Vt Motor, And Electrical Work In Network Sector-119, 120 And 151 To 154 ) Noida.. Submission Date for this Tender is 29-09-2021. Electrical Maintenance Tenders in NOIDA Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Rewinding of VT Motor & Booster Motor (Centrifugal Motor) Kirloskaer make / Equivalent make as per original winding 415 volt with super enamelled copper wire as required gauge complete all respect as per direction of Engineer incharge. It is also include the dismentling / Refixing / Catage from site to workshop / factory and vice versa. The old material will the property of contractor (Old material rate already deducted in AOR)40 HP, 1440 RPM |
| 2 | S/F Thurst bearing No. 7220 SKF/N.B.C. Make or as per sample approved by the E/I |
| 3 | S/F of Ball Bearing 6311.(Make : SKF , Kayo , NTN or similar) for 40 HP motor |
| 4 | S/F of 11 KV TPMO Relco/Rama make 9 nos. insulator of Jai shree/BHEL make complete in all respects as per direction ofE/I. |
| 5 | S/F of out door type 11 KV fuse set Ralco/Rama make with insulator Jai shree/BHEL make complete in all respects as per direction ofE/I. |
| 6 | S/F overhead line with ACSR conductor RABBIT/RECON category one poles/service bracket i/c bindng etc. complete in all respects. |
| 7 | Rewinding & repairing of Transformer Kirlosker make / Equivalent make as per original winding 11/.433 K.Volt with super enameled copper wire as required gauge complete all respect as per direction of Engineer in Charge. It it also include the dismantling / Refixing/Cartage from site to workshop / factory and vice versa. The old material will the property of contractor (Old material rate already deducted in AOR) 7.01) 250 KVA |
| 8 | 400 KVA |
| 9 | Rewinding of 63 KVA transformer i/c LT/HT burnt coil and changing of LT/HT bushing i/c gasket and filling oil testing, commissioning and transportation of transformer factory to site and vice versa complete in all respects. |
| 10 | Dis / Re-erection of 63 KVA transformer with the help of crane machine including cartage from the site to as per ISS including fees as per direction of E/I |
| 11 | S/F Fresh Transformer Oil as per latest specifications of Savita Make |
| 12 | Supply & Fixing Flat Cable 25 Sqmm. 3 Core Finolex make. |
| 13 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction of E/I.12.01) 25 Sqmm |
| 14 | 70 Sqmm |
| 15 | 400 Sqmm |
| 16 | S/L of Al. conductor PVC insulated armoured served, sheathed cable 1100 V grade at a depth of below ground level over a cushion of 75mm below ground level over a cushion of 75mm thick sand alround protected with burnt brick on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 13.01) 70 sqmm 3½ core |
| 17 | 400 sqmm 3½ core |
| 18 | S/F of 200 Amp. 415 V Heavy duty double break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respects Cat "A". |
| 19 | S/F of 400 Amp. 415 V metal clad TPN CFS complete with HRC fuse set etc. on angle iron frame complete in all respects Cat "B". |
| 20 | S/F of 400 Amp. four pole change over switch on 50x50x6mm angle iron frame i/c the cost of labour, T&P, painting and other material requried for proper completion of the work as per direction and satisfaction of E/I. |
| 21 | Supply and fixing of recess / surface mounting square 24 to 32 Watt LED down lighter having powder coated die cast aluminium housing with extended heat sink, diffuser / Reflector and driver set complete in all respects. |
| 22 | Supply and laying of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality. |
| 23 | Supplying and laying of following site DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 24 | Supply and burring of safe earthing electrode T-19 Cu-Copper coated, lengh 2000mm, outer pipe 48.4mm x 3.2 inner pipe 26.9mm x 2.6, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing along with 30 cm square C.I. frame with hinged cover & masonry housing, (From electrode terminal to switch board, coast of 25 x 3 copper strip will be extra) Make : As approved in U.P. P.W.D., & C.P.R.I. Cerified. |
| 25 | S/F of 11 KV disc insulator 70 KN and fitting B&S heavy duty with clamp of cross arm fixed on HT pole of BHEL/Jai Shree/WS/PR make. |
| 26 | S/F of 11 KV pin insulator of BHEL/Jai Shree on cross arm fixed on HT pole i/c all T&P. |
| 27 | S/F 125 Amp. 3 Pole MCCB TM type, 36 KA (Make- L&T C-Power / D-Sine) / Siemns (3WL/VL) / Schniender (Masterpact / NSX) |
| 28 | S/F 250 Amp. 3 Pole MCCB TM type, 36 KA (Make- L&T C-Power / D-Sine) / Siemns (3WL/VL) / Schniender (Masterpact / NSX) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
