Public Health Department. has published Renovation Of Phs Work In H.No. 2056 Type 11, In Sec-28, Chandigarh Under Mtc. Booth Sector-27, Chd. ) Renovation Of Phs Work In H.No. 2056 Type 11, In Sec-28, Chandigarh Under Mtc. Booth Sector-27, Chd. ) . Submission Date for this Tender is 30-09-2021. Civil Work Tenders in CHANDIGARH Chandigarh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making goodDSR :17.3 |
2 | W.C. pan with ISI marked white solid plastic seat and lid DSR17.3.1 |
3 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillars taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good |
4 | White vitreous china wash basin size 550 x 400 mm with apair of 15 mm C.P. brass pillars tap DSR 17.7.3 |
5 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
6 | Kitchen sink without drain board |
7 | 610x460mm bowl depth 200 mm DSR 17.10.2.2 |
8 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
9 | 32 mm dia DSR 17.28.2.1 |
10 | 40 mm dia DSR 17.28.2.2 |
11 | Providing and fixingtrap of self cleansing design with screwed down or hinged grating with or without vent arm complete,Including cost of cutting and making good the walls and floors: |
12 | 100 mm inlet and 75 mm outlet |
13 | Sand cast iron S&S as per IS : 3989 DSR 17.60.2.2 |
14 | Providing and fixing ofG.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. |
15 | 15 mm dia. nominal boreDSR 18.10.1 |
16 | 20 mm dia. nominal boreDSR 18.10.2 |
17 | 32 mm dia. nominal bore DSR 18.10.4 |
18 | Providing and fixing ofG.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.( Concealedpipe ) |
19 | 15 mm dia. nominal bore DSR 18.11.1 |
20 | 20 mm dia. nominal boreDSR 18.11.2 |
21 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
22 | 20 mm dia. nominal boreDSR 18.18.2 |
23 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
24 | 15 mm nominal boreDSR 18.21.1.1 |
25 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
26 | 15 mm nominal bore DSR 18.46.1 |
27 | 20 mm nominal bore DSR 18.46.2 |
28 | Providing and fixingC.P. brass bib cock of approved quality conforming to IS : 8931 |
29 | 15 mm nominal boreDSR 18.49.1 |
30 | Providing and fixingC.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
31 | 15 mm nominal boreDSR 18.51.1 |
32 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
33 | 15 mm nominal bore. DSR 18.52.1 |
34 | Providing and fixingC.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 |
35 | 15 mm nominal bore DSR 18.53.1 |
36 | Providing and fixingof Extension nipppleupto 1-1/2" lengthDSR 18.53A |
37 | Cutting holes up to 30x30 cm in walls including making good the same: |
38 | With F.P.S. bricksDSR 18.76.1 |
39 | Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. DSR 18.77 |
40 | Providing and fixingsquare-mouth S.W. gully trap grade "A" complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size ( inside) the weight of cover to be not less than 4.50 kg and frame to be notless than 2.70 kg as per standard design. |
41 | 100 x 100 mm size P-type |
42 | With F.P.S. Bricks class designation 75 DSR 19.4.1.1 |
43 | Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged gratingand cost of sand bajri etc. of approved make |
44 | Providing and fixingof C.P. Steel Grating Heavy (With hole without hole) size 4" i/d of approved make |
45 | Providing and fixingof C.P. brass revolving joint shower with arm of approved make |
46 | Providing and fixing of C.P. cup heavy duty of approved make |
47 | Prov. & fixing550x 400 mm beveled edge mirror of superiorglass (of approved quality) complete with 5 mm thick hard boardground fixed to wooden cleats with C.P. brass of approved make |
48 | Providing and fixing of C.P. brass towel Rail fixed with Ravl PlugsC.p screw of 600 wiking cap at site of approved make |
49 | Providing and fixing of C.P. brass soap dish with C.P screwcomplete at siteof approved make |
50 | Providing and fixing of C.P. brass towel ring comp. at site for WHB of approved make |
51 | Providing and fixing of G.I elbow 3" x1-1/2" |
52 | Credit of old material |
53 | HCI/G.I/C.I |
54 | Brass/GM scrap |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail