Military Engineer Services-MES has published Repair And Maint Of Vehicle And Manning And Operation Of Stp At Cod Area Under Age E/M Of Ge (East) Jabalpur As Per Boq. Submission Date for this Tender is 20-10-2021. Vehicle Maintenance Service Tenders in Garrison Engineer (East) Jabalpur Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 13-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-10-2021 |
Sl. No. | Item Description |
1 | Periodical servicing of staff car, Ambassador BA No-09B-101763H,after 5000 KM Run or period of six months which ever is earlier all as specified and directedwhich include the following :- (a) Complete washing of veh including dry/vaccum cleanning of seats (b) Wheel alignment :-Taking down all the wheel/tyre after unscrewing nuts&bolts, for wheel alignment , rotation of tyre as required & fixing the same after wheel balancing by computerised machine or equipments all as specified and directed, NOTE:- Replacement of tyres where ever reqd shall be measured and paid separately in respective item. (c) Servicing of veh brake system by strip opening the brake shoes and connected items such as brake shoes/disc/master cylinder/wheel cylinder/brake oil hose/brake oil reservoir tank/topping up of brake oil up to the mark and test drive upto 5 KM as directed (d) Servicing of veh clutch system by strip opening the clutch plate/pressure plate/clutch fork/bearing etc allas specified and directed (e) Servicing of self starter by strip opening Self starter/Dynamo/avr/battery charging systems/circuit/replacement of carbon brush etcall as specified and directed (f) Taking out and filling any type of oils. (g) Taking out and fixing any type of filter (h) Greasing of vehicle including nipple greasing. |
2 | Notes 1:- Servicing /Checking of all parts such as bush/studs/nuts&bolts, washer/indicator/ headlight lamp,Except engine are part of servicing including M&L for applying anabond tube, locks for nuts, screws, arresting of unwarranted noise from the veh. 2. Oils, filters shall bemeasured and paid separately as supply only here in after.3. Other parts shall be measured and paid as M&L/ S&F as indicated as required complete all as specified & directed. 4 Each service per vehicle to be measured and paid as one Unit. 5.Repair of vehicle shall be got done through authorised workshop as per approval of GE.6.. Make of spare parts shall be as per existing make as per approval of GE. |
3 | Supply only Air filter |
4 | Supply only Fuel filter |
5 | Supply only Oil filter |
6 | M&L in replacement for Clutch plate |
7 | M&L in replacement for Pressure Plate |
8 | M&L in replacement for clutch master cylinder |
9 | M&L in replacement for cluch bearing |
10 | M&L in replacement for cluch cable/wire |
11 | M&L in replacement for master wheel cylinder |
12 | M&L in replacement for wheel cylinder |
13 | M&L in replacement for brake pad set |
14 | M&L in replacement for brake shoe set |
15 | M&L in replacement for brake booster |
16 | M&L in replacement for brake disc |
17 | M&L in replacement for spark plug |
18 | M&L in replacement for Link bush set (4 Nos) |
19 | M&L in replacement for distance tube set(4Nos) |
20 | M&L in replacement for Bush kit complete |
21 | M&L in replacement for shocker |
22 | M&L in replacement for Thrust washer set(4 Nos) |
23 | M&L in replacement for Stabilizer bush (Set) |
24 | M&L in replacement for Timing belt |
25 | M&L in replacement for Timing Bearing/Roller |
26 | M&L in replacement for Fan belt |
27 | M&L in replacement for water pump |
28 | M&L in replacement for tappet packing |
29 | M&L in replacement for Tie rod end set |
30 | M&L in replacement for Supporting Rod |
31 | M&L in replacement for Idler Arm |
32 | M&L in replacement for Rack seal |
33 | M&L in replacement for Fuel pump motor |
34 | M&L in replacement for Radiator fan |
35 | M&L in replacement for disc pad lock set (04 Nos) |
36 | M&L in replacement for Ignition amplifier senser/ mpfi |
37 | M&L in replacement for Ignition coil |
38 | M&L in replacement for Bumper |
39 | M&L in replacement for Bumper (Grand) |
40 | M&L in replacement for Tail light assy (Old Model) |
41 | M&L in replacement for Tail light assy (New Model) |
42 | M&L in replacement for accelerator cable |
43 | M&L in replacement for Parking Break Cable |
44 | M&L in replacement for Hose for Break |
45 | M&L in replacement for Hose for radiator |
46 | M&L in replacement for Wheel Bearing |
47 | M&L in replacement for PVC Radiator Tank |
48 | M&L in replacement for Radiator |
49 | M&L in replacement for Door Handle |
50 | M&L in replacement for Door Lock |
51 | M&L in replacement for Door Glass machine |
52 | M&L in replacement for Door Glass machine power window |
53 | M&L in replacement for Door Gatta board set |
54 | M&L in replacement for Door Rubber set |
55 | M&L in replacement for Door glass rubber/gola set |
56 | M&L in replacement for Door Glass |
57 | M&L in replacement for Diggi Lock |
58 | M&L in replacement for Wind Shield (Front Glass) |
59 | M&L in replacement for Back Glass (Diggi Side) |
60 | M&L in replacement for Side view mirror complete |
61 | M&L in replacement for Inner Back view mirror |
62 | M&L in replacement for Indicator |
63 | M&L in replacement for Head light complete |
64 | M&L in replacement for Head Lamp/Tube |
65 | M&L in replacement for Tale light Complete |
66 | M&L in replacement for Tale light cover |
67 | M&L in replacement for Solenoid Switch |
68 | M&L in replacement for Bendex |
69 | M&L in replacement for Coil field |
70 | M&L in replacement for Carbon Brush |
71 | M&L in replacement for Fuel Tank Lock |
72 | M&L in replacement for Ignition switch |
73 | M&L in replacement for Combination Switch |
74 | M&L in replacement for Fly Weel Ring |
75 | M&L in replacement for Main Seal |
76 | M&L in replacement for Gear Box Seal |
77 | M&L in replacement for Differential ( Star, washer crown pinion) |
78 | M&L in replacement for propeller shaft bearing |
79 | M&L in replacement for propeller shaft Cross |
80 | M&L in replacement for propeller shaft |
81 | M&L in replacement for Roof light |
82 | M&L in replacement for Electronic control unit |
83 | M&L in replacement for Meter cable |
84 | M&L in replacement for Fuel pipe set rubber |
85 | M&L in replacement for Fuel pipe set Mpfi |
86 | M&L in replacement for Flag rod |
87 | M&L in replacement for Wiper motor |
88 | M&L in replacement for Wiper arm set |
89 | M&L in replacement for Wiper Blade set |
90 | M&L in replacement for Steering Assy (Manual) |
91 | M&L in replacement for Steering Assy(Power) |
92 | M&L in replacement for Steering Wheel |
93 | M&L in replacement for Steering rack /pinion |
94 | M&L in replacement for coil assy mpfi |
95 | Periodical servicing of veh LCV Eicher -BA No. :- 07D - 172756P & 16D -202549K after 5000 KM Run or period of six months which ever is earlier all as specified and directed which include the following :- (a) Complete washing of veh including dry/vacuum cleaning of seats (b) Wheel alignment :-Taking down all the wheel/tyre after unscrewing nuts&bolts, for wheel alignment , rotation of tyre as required & fixing the same after wheel balancing by computerised machine or equipments all as specified and directed, NOTE:- Replacement of tyres where ever reqd shall be measured and paid separately in respective item. (c) Servicing of veh brake system by strip opening the brake shoes and connected items such as brake shoes/disc/master cylinder/wheel cylinder/brake oil hose/brake oil reservoir tank/topping up of brake oil up to the mark and test drive upto 5 KM as directed(d) Servicing of veh clutch system by strip opening the clutch plate/pressure plate/clutch fork/bearing etc allas specified and directed(e) Servicing of self starter by strip opening Self starter/ Dynamo/avr/battery charging systems/circuit/replacement of carbon brush etc.as specified and directed . (f) Taking out and filling any type of oils. (g) Taking out and fixing any type of filter (h) Greasing of vehicle including nipple greasing. |
96 | Notes 1 :- Servicing /Checking of all partssuch as bush/studs/nuts&bolts,washer/indicator/ headlight lamp Except engine are part of servicing including M&L for applying anabond tube, locks for nuts, screws, arresting ofunwarranted noisefrom the veh. 2.Oils, filters shall bemeasured and paid separately as supply only here in after.3. Other parts shall be measured and paid as M&L/S&F as indicated as required complete all as specified & directed. 4 Each service per vehicle to be measured and paid as one Unit.5.Repair of vehicle shall be got done through authorised workshop as per approval of GE.6.. Make of spare parts shall be as per existing make as per approval of GE. |
97 | Supply only for Air filter |
98 | Supply only for Fuel filter (set of 2) |
99 | M&L in replacement for Water separater |
100 | Supply only for Oil filter |
101 | M&L in replacement for Clutch Plate |
102 | M&L in replacement for Pressure Plate |
103 | M&L in replacement for Clutch cylinder upper |
104 | M&L in replacement for Clutch cylinder lower |
105 | M&L in replacement for Clutch Bearing |
106 | M&L in replacement for Clutch Fork |
107 | M&L in replacement for Master wheel cylinder |
108 | M&L in replacement for wheel cylinder kit |
109 | M&L in replacement for brake shoe /linning(set of two) |
110 | M&L in replacement for brake booster |
111 | M&L in replacement for king pin set |
112 | M&L in replacement for Tie rod end set |
113 | M&L in replacement for Drag link assy |
114 | M&L in replacement for steering bend assy |
115 | M&L in replacement for steering worm |
116 | M&L in replacement for steering bearing |
117 | M&L in replacement forkammani bush kit |
118 | M&L in replacement for sheckle assy |
119 | M&L in replacement forkamani pin set |
120 | M&L in replacement for shocker assy |
121 | M&L in replacement for Spring leaf |
122 | M&L in replacement for wheel bearing set |
123 | M&L in replacement for self armature assy |
124 | M&L in replacement for rocker plate |
125 | M&L in replacement for self solonied switch |
126 | M&L in replacement for self bendex |
127 | M&L in replacement for Alternator cut out |
128 | M&L in replacement for Alternator stater assy |
129 | M&L in replacement for Alternator Bearing |
130 | M&L in replacement for water pump assy |
131 | M&L in replacement for radiator assy |
132 | M&L in replacement for fan belt |
133 | M&L in replacement for radiator fan |
134 | M&L in replacement for raditor hose pipe set |
135 | M&L in replacement for Brake hose pipe |
136 | M&L in replacement for gear lever assy |
137 | M&L in replacement for Fly wheel assy |
138 | M&L in replacement for Fly wheel ring |
139 | M&L in replacement for wiper motor assy |
140 | M&L in replacement for wiper blade set |
141 | M&L in replacement for wiper armset |
142 | M&L in replacement for combination switch |
143 | M&L in replacement for Full ignition switch |
144 | M&L in replacement for head light assy with lamp |
145 | M&L in replacement for indicater assy |
146 | M&L in replacement for tail light assy |
147 | M&L in replacement for door handle set |
148 | M&L in replacement for door rubber set |
149 | M&L in replacement for door gola |
150 | M&L in replacement for door lock |
151 | M&L in replacement for outer handle |
152 | M&L in replacement for side view mirror |
153 | M&L in replacement for Front wind shield (Front Glass) |
154 | M&L in replacement for accelater cable |
155 | M&L in replacement for Speedo meter wire |
156 | M&L in replacement forFuel Pressure Nozzle |
157 | M&L in replacement for Crown pinion set |
158 | M&L in replacement for Pinion assy |
159 | M&L in replacement for Spider cross |
160 | M&L in replacement for Star washer kit |
161 | M&L in replacement for Pinion seal |
162 | M&L in replacement for shaft cross set of 3 |
163 | M&L in replacement for Yoke teeth |
164 | M&L in replacement for Holder cross(3) |
165 | M&L in replacement for Center Bearing with rubber |
166 | M&L in replacement for Gear coupling |
167 | M&L in replacement for Pinion coupling |
168 | M&L in replacement forwheel seal |
169 | M&L in replacement for Differential star big |
170 | M&L in replacement for Differential star small |
171 | M&L in replacement for Fuel pump rotar assy |
172 | M&L in replacement for Head light relay |
173 | M&L in replacement for flasher relay |
174 | M&L in replacement for roof light |
175 | M&L in replacement for head light complete with tube/bulb |
176 | M&L in replacement for Drag link rod kit |
177 | M&L in replacement for Alternater bearing set |
178 | M&L in replacement for Door glass machine |
179 | M&L in replacement for Door glass |
180 | M&L in replacement for Gear box seal set |
181 | M&L in replacement for Steering box seal set |
182 | M&L in replacement for Bumper corner |
183 | M&L in replacement forwheel cylinder assy |
184 | M&L in replacement for Fuel pipe set |
185 | M&L in replacement for Fuel Gauge |
186 | M&L in replacement for meter assy |
187 | M&L in replacement for Front show grill |
188 | M&L in replacement for Gear counter shaft |
189 | M&L in replacement for 4th gear |
190 | M&L in replacement for 3rd gear |
191 | M&L in replacement for 2nd gear |
192 | M&L in replacement for 1x2 gear sleeve |
193 | M&L in replacement for 3x4 gear sleeve |
194 | M&L in replacement for Synozrising ring big/Small set |
195 | M&L in replacement for Gear main shaft |
196 | M&L in replacement for Gear box lock kit |
197 | M&L in replacement for 5th gear |
198 | M&L in replacement for Wheel brake drum |
199 | Perodical servicing of MOTOR CYCLE ROYAL ENFIELD:-BA-11A-62424E , total-01 after 3000 KM Run or Period of 06 month which ever is earlierall as specifed and directed which include the following Activity :-(a) Complete washing.(b) Servicing of veh brake system by strip opening the brake shoes and connected such as brake shoes/disc and testing of brake by test drive upto 5 Km etc complete all as directed and specified .(c)Servicing of veh clutch systems by strip opening the clutch plate/pressure plate/clutch fork/bearing etc all as specified and directed .(d)Servicing of veh Dynamo/ avr/ battery charging systems/circuit/ etc.complete all as specified and directed (e) Taking out and filling any type of oils. (f) Taking out and fixing any type of filter (h) Greasing of vehicle including nipple greasing. |
200 | Notes 1 : Servicing /Checking of all partssuch as bush/ studs/ nuts & bolts, washer/ indicator/headlight lamp Except engine are part of servicing including M&L for locks for nuts, screws, arresting ofunwarranted noisefrom the veh shall be part of job. 2. Oils, filters shall bemeasured and paid separately as supply only here in after.3. Other parts shall be measured and paid as M&L/S&F as indicated as required complete all as specified & directed. 4. Each service per vehicle to be measured and paid as one Unit.5.Repair of vehicle shall be got done through authorised workshop as per approval of GE.6.. Make of spare parts shall be as per existing make as per approval of GE. |
201 | Supply onlyforair filter |
202 | Supply only forFuel filter |
203 | Supply only for oil filter |
204 | M&L in replacement forchain Set |
205 | M&L in replacement for spark plug |
206 | M&L in replacement forcarburetor |
207 | M&L in replacement foraccelerator wire |
208 | M&L in replacement forclutch wire |
209 | M&L in replacement forBrake shoe |
210 | M&L in replacement for Brake drum |
211 | M&L in replacement for Head light assy with suitable bulb and holder complete |
212 | M&L in replacement for Front shocker |
213 | M&L in replacement for Speedo meter |
214 | M&L in replacement for Rear shocker |
215 | M&L in replacement for Ignition switch |
216 | M&L in replacement for Timing rod |
217 | M&L in replacement for Speedometer wire |
218 | M&L in replacement for Complete electric wiring set |
219 | M&L in replacement for RTV |
220 | M&L in replacement for Rear view mirror |
221 | M&L in replacement for tail light Complete |
222 | M&L in replacement for Indicator Complete |
223 | M&L in replacement for tail light Cover |
224 | M&L in replacement for Indicator Cover |
225 | M&L in replacement for Center stand |
226 | M&L in replacement for side stand |
227 | M&L in replacement for Seat |
228 | M&L in replacement for Seat Cover |
229 | M&L in replacement for Head packing/Gaskit |
230 | M&L in replacement for Kick |
231 | M&L in replacement for Foot rest |
232 | M&L in replacement for Handle lever |
233 | M&L in replacement for Lamp for head light |
234 | M&L in replacement for Lamp for Indicater |
235 | M&L in replacement for Gear Shaft |
236 | M&L in replacement for Gear Lever |
237 | M&L in replacement for Gear assy |
238 | M&L in replacement for Brake paddle |
239 | M&L in replacement for Diggi |
240 | M&L in replacement for Fuel tank cover lid with lock |
241 | Periodical servicing/maintenance/Repair of veh MOTOR CYCLE HERO HONDA:-BA-21A-075224Y, BA-21A-075225W BA-21A-075226N(3 No) after 5000 KM Run or Period of 06 month which ever is earlierall as specified and directed by Engr-in-charge which include the following :-(a) Complete washing.(b) Servicing of veh brake system by strip opening the brake shoes and connected such as brake shoes/disc and testing of brake by test drive upto 5 Km complete all as directed and specified .(c)Servicing of veh clutch systems by strip opening the clutch plate/pressure plate/clutch fork/bearing etc all as specified and directed .(d)Servicing of veh Dynamo/avr/battery charging systems/circuit etc.complete all as specified and directed (e) Taking out and filling any type of oils. (f) Taking out and fixing any type of filter(h) Greasing of vehicle including nipple greasing. |
242 | Notes 1:Servicing /Checking of all partssuch as bush/studs/nuts&bolts, washer/ indicator/headlight lamp Except engine are part of servicing including M&L for locks for nuts, screws, arresting ofunwarranted noisefrom the veh. 2. Oils, filters shall bemeasured and paid separately as supply only here in after.3. Other parts shall be measured and paid as M&L/S&F as indicated as required complete all as specified & directed. 4.Each service per vehicle to be measured and paid as one Unit.5.Repair of vehicle shall be got done through authorised workshop as per approval of GE.6.. Make of spare parts shall be as per existing make as per approval of GE. |
243 | Supply only for air filter |
244 | Supply only for Fuel filter |
245 | M&L in replacement forchain Set |
246 | M&L in replacement forspark plug |
247 | M&L in replacement forcarburetor |
248 | M&L in replacement foraccelerator wire |
249 | M&L in replacement forclutch wire |
250 | M&L in replacement forBrake shoe |
251 | M&L in replacement for Brake drum |
252 | M&L in replacement for Head light assy with suitable bulb and holder complete |
253 | M&L in replacement for Front shocker |
254 | M&L in replacement for Speedo meter |
255 | M&L in replacement for Rear shocker |
256 | M&L in replacement for Ignition switch |
257 | M&L in replacement for Timing Chain |
258 | M&L in replacement for Speedometer wire |
259 | M&L in replacement for Complete electric wiring set |
260 | M&L in replacement for RTV |
261 | M&L in replacement for Rear view mirror |
262 | M&L in replacement for tail light Complete |
263 | M&L in replacement for Indicator Complete |
264 | M&L in replacement for tail light Cover |
265 | M&L in replacement for Indicator Cover |
266 | M&L in replacement for Center stand |
267 | M&L in replacement for Side stand |
268 | M&L in replacement for Seat |
269 | M&L in replacement for Seat Cover |
270 | M&L in replacement for Head packing/Gaskit |
271 | M&L in replacement for Kick |
272 | M&L in replacement for Foot rest |
273 | M&L in replacement for Handle lever |
274 | M&L in replacement for Lamp for head light |
275 | M&L in replacement for Lamp for Indicater |
276 | M&L in replacement for Gear Shaft |
277 | M&L in replacement for Gear Lever |
278 | M&L in replacement for Gear assy |
279 | M&L in replacement for Brake paddle |
280 | M&L in replacement for Diggi |
281 | M&L in replacement for Fuel tank cover lid with lock |
282 | Periodical servicing/maintenance/Repair of veh PCV TATA XENONBA No-21C-109085H,BA No.21C-109088P ,BA No 21C-109089P after 5000 KM Run or Period of 06 month which ever is earlier all as specifiedwhich include the following :-(a) Complete washing of veh including dry/vacuum cleaning of seats. (b)Taking out and filling any type of oils. (c) Taking out and fixing any type of filter . (d)Wheel alignment :-Taking down all the wheel/tyre after unscrewing nuts&bolts, for wheel alignment , rotation of tyre as required & fixing the same after wheel balancing by computerised machine or equipments all as specified and directed,NOTE:- Replacement of tyres where ever reqd shall be measured and paid separately in respective item. (e) Servicing of veh brake system by strip opening the brake shoes and connected items such as brake shoes/disc/master cylinder/wheel cylinder/brake oil hose/brake oil reservoir tank/topping up of brake oil up to the mark and test drive upto 5 KM as directed(f) Servicing of veh clutch system by strip opening the clutch plate/pressure plate/clutch fork/bearing etc allas specified and directed(g) Servicing of self starter by strip opening Self starter/ Dynamo/avr/battery charging systems /circuit/replacement of carbon brush etc (h) Greasing of vehicle including nipple greasingall as specified and directed |
283 | Notes 1:- Servicing /Checking of all parts such as bush/studs/nuts&bolts, washer/ indicator/headlight lamp Except engine are part of servicing including M&Lfor applying anabond tube, locks for nuts, screws, arresting ofunwarranted noisefrom the veh . 2. Oils, filters shall bemeasured and paid separately as supply only here in after.3. Other parts shall be measured and paid as M&L/S&F as indicated as required complete all as specified & directed. 4. Each service per vehicle to be measured and paid as one Unit. 5.Repair of vehicle shall be got done through authorised workshop as per approval of GE.6.. Make of spare parts shall be as per existing make as per approval of GE. |
284 | Supply onlyfor Air filter |
285 | Supply only for Fuel filter |
286 | Supply onlyfor Oil filter |
287 | M&L in replacement for Clutch Plate |
288 | M&L in replacement for Pressure Plate |
289 | M&L in replacement for Clutch master cylinder |
290 | M&L in replacement for Clutch Bearing |
291 | M&L in replacement for Clutch Cable/wire |
292 | M&L in replacement for Clutch fork |
293 | M&L in replacement for Master wheel cylinder |
294 | M&L in replacement for wheel cylinder |
295 | M&L in replacement for brake pad set with lock |
296 | M&L in replacement for brake shoe set |
297 | M&L in replacement for brake booster |
298 | M&L in replacement for brake disc/Roter |
299 | M&L in replacement for bendex |
300 | M&L in replacement for Armature |
301 | M&L in replacement for field coil |
302 | M&L in replacement for carbon brush |
303 | M&L in replacement for solenoid switch |
304 | M&L in replacement for Alternater |
305 | M&L in replacement for Fan belt |
306 | M&L in replacement for Timing belt |
307 | M&L in replacement for Timing adjuster/Tensioner |
308 | M&L in replacement for Water pump |
309 | M&L in replacement for Radiator |
310 | M&L in replacement for Radiator fan |
311 | M&L in replacement for Radiator hose pipe |
312 | M&L in replacement for accelater cable |
313 | M&L in replacement for Speedometer cable |
314 | M&L in replacement for Fuel gauge |
315 | M&L in replacement for Temp switch |
316 | M&L in replacement for oil pressure switch |
317 | M&L in replacement for Gear lever assy |
318 | M&L in replacement for Gear bush |
319 | M&L in replacement for End set |
320 | M&L in replacement for Ball joint set |
321 | M&L in replacement for link rod set |
322 | M&L in replacement for center pin bush |
323 | M&L in replacement for bush kit |
324 | M&L in replacement for Shaft cross |
325 | M&L in replacement for Center bearing |
326 | M&L in replacement for Shaft coupling |
327 | M&L in replacement for Propeller shaft |
328 | M&L in replacement for Wheel bearing |
329 | M&L in replacement for Hub seal |
330 | M&L in replacement forwheel seal |
331 | M&L in replacement for Differential star |
332 | M&L in replacement for Differential seal |
333 | M&L in replacement for Pinion bearing |
334 | M&L in replacement for crown pinion |
335 | M&L in replacement for brake hose pipe |
336 | M&L in replacement for Head light complete without tube/ bulb |
337 | M&L in replacement for Indicater complete |
338 | M&L in replacement for Head light Tube/bulb |
339 | M&L in replacement for Indicater lamp |
340 | M&L in replacement for door handle set |
341 | M&L in replacement for door rubber set |
342 | M&L in replacement for door gola set |
343 | M&L in replacement for door lock |
344 | M&L in replacement for outer handle |
345 | M&L in replacement for Ignition switch complete |
346 | M&L in replacement for Combination switch |
347 | M&L in replacement for Door Gatta board |
348 | M&L in replacement for Door glass machine |
349 | M&L in replacement for Door glass |
350 | M&L in replacement for Light relay |
351 | M&L in replacement for flasher relay |
352 | M&L in replacement for Heater plug |
353 | Manning and operation of Sewage treatment plant of capacity 240 Cum/day at COD Jabalpur in shift (08 Hrs) each with all consumable material including chemicals (Minimum consumption 25 Ltr/Month of Aquadate-02/MAC in the ratio of 1:4 for descaling in monthly basis and rate shall be included in quoted rate complete all as directed. |
354 | Notes for item No – 01 above are as follows:- |
355 | (a)Repair to system in case of break down, within 24 hours. |
356 | (b)Repairs to electrical eqpt, accessories as and when required. |
357 | (c)Repairs to flushing tanks in case of leakage etc. |
358 | (d)Daily, weekly, monthly, quarterly, half yearly and yearly comprehensive maintenance to be carried out and keeping records thereof. |
359 | (e)To provide additional manpower for rectification of major problems and cleaning of tanks etc. |
360 | (f) All types of fire eqpts provided in all the installations shall be maintained and operated properly. |
361 | (g) All electrical fittings and fixtures to be maintained and contractor shall be responsible for any damage. |
362 | (h)All types of water tanks incl flushing tanks shall be maintained. |
363 | (j)All installations to be kept neat and clean all the time and security checks to be carried out daily. |
364 | (k)All tanks shall be cleaned twice in a year and dates of cleaning shall be marked on tanks. |
365 | (l)In case of any damage, misuse, mishandling of Govt property, contractor will be held responsible for the same. |
366 | (m)Treated water to be tested periodically and record to be maintained. |
367 | (n)Proper disposal of residual dry waste / other waste material should be carried out by the contractor. The cost of the same is deemed included in the unit rate quoted. |
368 | (o)Medical needs to be provided by the contractor to the employees as and when required. |
369 | (p) All safety eqpts such as breathing apparatus, safety belt, air hose respiratory, portable lighting eqpt, driver suit etc for working hazardous condition to be provided by contractor. |
370 | (q)First Aid Box with basic medicines to be kept in main installation by the contractor. |
371 | (r)Misuse of electricity and water to be penalised and effective recovery will be made by the department. |
372 | (s)All chemicals required for sewage treatments shall be supplied by the contractor and suitable quantity to be maintained as stock for atleast one month as directed by Engr-in-charge. cost of the chemicals and cosumable is deemed included in the unit rate quoted. |
373 | (t)The Contractor shall get the testing of treated sewage from approved test lab, once in a month to assertain result of treated sewage as per the requirement for which STP has been installed. Quoted rate for the same are deemed to be inclusive in quoted rate. |
374 | (u)In each shift one operator shall be provided and timing of shift shall be desided by GE / Engr-in-charge. |
375 | Additional Notes for item No 139 above : |
376 | (i) Operator must be skilled and having minimum four year experience in handling / operating sewage treatment plant. The Contractor shall produced experience certificate to GE and shall be got approved by GE before employing the operator. |
377 | (ii) The operator must adhere dress code as directed. |
378 | (iii) Daily visual check to be carried out by the Operator and to inform the Engr-in-charge / JE incase any discrapancy. |
379 | (iv) The contractor will be responsible to keep the plant and its surrounding area clean. |
380 | (v) The Operator shall maintain all record in log sheet / log book. |
381 | (vi) All test shall be carried weekly and record therof shall be maintained in a register. |
382 | (vii) The Contractor maintained a cellphone in all shift with incoming and outgoing facilities and ensure proper functioning for contract period. |
383 | (viii)It is the responsibility of AGE/JE to ensure that attendance register is maintained at all the installation duly signed kept on record and payment of trade men for the Nos of days present will only be made, Engineer-in-Charge will be responsible for payment of trade men in his presence. Contractor shall provide proper dress to tradesmen as approved by Eng-in-Charge and during duty hours all tradesmen shall be in proper uniform otherwise necessary recovery @ double the quoted rate for per shift shall be made from his dues. |
384 | (ix)In case the contractor does not operate the pumping set/AC Plant for a shift or part thereof due to any reason whatsoever double of the quoted rate to each shift will be recovered. |
385 | (x)Leave of deployed person in inescapable cases shall be allowed on prior intimation but Contractor on demand of Engineer-in-Charge, shall arrange alternate arrangment. Payment shallnot be allowed for leave period. |
386 | (xi)In no case wages of deployed persons shall be less than the Minimum wages fixed by Govt Competent Authority. It is mandatory requirement for Contractor that payment of deployed person shall be made through Cheque/RTGS/Acceptable Electronic Mode only. Proof of payment shall be submitted by Contractor to Engineer in Charge monthaly basis or during claiming on account of Advance (RAR)/FB. |
387 | (xii)The Employees Provident Funds & Miscellaneous Provisions (EPF & MP) Act, 1952. shall be strictly adhered to by the Contractor. Social Security to workers i.e. EPF, ESIC, Personal Insurance(if applicable) on part of Employer shall be paid by Contractorand accordingly, Contractor/Bidder shall include all these factors in his quoted rate. |
388 | (xiii)Statuatory levies/GST if applicable on part of contracts shall be paid by Contractorand accordingly, Contractor/Bidder shall include all these factors in his quoted rate. |
389 | (xiv)Deployed person shall report daily to JE/Engineer in charge or nominated officers by Accepting Officer for their attendence & obtain instructions. An attendenceregister shall be maintained by Contractor on site shall be certified by MES rep every day. |
390 | (xv) T&P - Working Tools/plants, protective cloths, communication & conveyance arrangments shall be provided by Contractor at his own cost. |
391 | (xvi)Retrieved materials obtained from replacement by new items shall be deposited in MES store. |
392 | (xvii)An uniform of blue shirt/jersy duly embossed "MES OUTSOURCING SERVICES" at back and name plate of the person on front left shall be provided by contractor to all workers at his own cost. |
393 | (xviii)Water & electric supply shall be provided by MES free of cost for outsourcing services only. |
394 | (xix)Documentation - Attendance register & wages register,Daily work register as per the format provided by the Deptt.shall be prepared & maintained at his own cost. |
395 | (xx)The contractor shall arrange introductory meeting of tradesmen/personnels proposed to be employed with GE prior to finalise their employment to as certain their biodata, skill in the respective trade and final aprroval shall rest with GE. Similarly removal of service of any employed personel shall also be with the consent of GE. |
396 | (xxi)All tradesman employed shall be insured by the contractor at his cost for the whole contract period from the date of commencemnt for any accident during the service hours. |
397 | (xxii) If quoted rates are less than minimum fair wages inclusive of GST, EPF, ESIC as applicable the bid shall be treated as non-bonafide and will be rejected. No objection/claim in this regard will be accepted |
398 | S&F in repair25 mm bore GI tubing "medium grade" with all fittings laid in trenches complete all as specified |
399 | S&F in repair 25mm bore gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
400 | Taking up Submersible Pump assembly including column pipe approx50 to70 mtrs using chain pulley block manually and carrying out following phase of work all as directed for 12.5/10 HP Pump Set .(i) Transportation of submersible pump -motor assembly for necessary repair. (ii) Carrying out overhauling of motor assembly 3 Phase ,taking out burnt winding wire,with & including PVC insulated water proof copper wire withwinding wire of appropriate gauge and turn,providing insulation materials and replacement of bearing and assembling with repaired/serviceable pump and testing complete all as directed by Eng-in Charge. (iii) Carrying out dismantling and overhauling of multi stage pump, incl cleaning and derusting of casing, replacement of worm out spare like bearings, impellar bushing, couplingetc & refixing of existing serviceable components after proper cleaning, machining all as required & assembling testing at workshop complete for 12.5/10 HP submersible pumpof any make including carrying out painting by two coats of synthetic enamelled paint over a coat of primer,assembling the pump and motor including testing complete all as specified and directed. |
401 | M&L for Rewinding the motor with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations as directed by engr-in-chargeharge.Make:Atlas/BWC/ Swastik/ Chetak |
402 | M&L Fully Automatic Star Delta Motor starter 15 HP in sheet-steel enclosure type MK-1 .feature (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 11-18 complete all as specified. (Make : L&T cat no SS 96257 or Equivalent OF SIEMENS/Schneider) |
403 | M&L IN REPLACMENT Fully Automatic Star Delta Motor starter 12.5 HP in sheet-steel enclosure type MK-1 .feature (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 9-14 complete all as specified. (Make : L&T cat no SS 96257 or Equivalent OF SIEMENS/Schneider) |
404 | S & F IN REPLACMENT Power contactor ML-1.5 , 3 pole rating not less than 40 A with 230 coil complete all as specified. Make L&T/Schnieder |
405 | S & F IN REPLACMENT Power contactor ML-2, 3 pole rating not less than 40 A with 230 coil complete all as specified. Make:L&T/Siemens/Schnieder |
406 | S&F in repairs MCCB 100 A 25 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager |
407 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 2 core 16 sq mm. Make Havells ,Plaza, Policab,Gloster etc. |
408 | Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out all as specified. |
409 | Returning filling including spreading and well ramming in layers each n.exc 25 cm thick in soft loose soil all as specified. |
410 | Removal of surplus/spoil on a distance n.exc 25 cm thick in soft loose soil all as specified. |
411 | Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm laid in trenches for under ground cable all as specified. |
412 | M&L for Sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified |
413 | M&L IN REPAIR for cable protection GI tubinglight grade fixed long the pole/under road/along the wall of size 50 mm bore with necessary clamps all as directed. |
414 | Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flatincluding earthingpit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pitcover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I) |
415 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out |
416 | S&F in repairs MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager |
417 | Supply and fix IN REPLACMENT LED security light fitting of 45 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of make CROMPTON / Wipro/Bajaj/Havells |
418 | S&F in repairs GI pipe "light grade" bracket 32 mm dia- 1.2 m long & 2 set of clamps made out of 30x5mm MS flat & fixed with anchor bolt suitable for 2x70 W security light fitting complete all as specified and directed |
419 | S&F IN REPAIR MCCB 250 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager |
420 | S&F IN REPAIR MCCB 200 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager |
421 | Schedule of credit amount of Rs. 66,300.00 to be deducted during AOC |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail