Chandigarh Administration Engineering Department has published Renovation Of Civil Dispensary, Sector-42, Chandigarh. Renovation Of Civil Dispensary, Sector-42, Chandigarh.. Submission Date for this Tender is 30-09-2021. Building Work Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
2 | All kinds of soil. |
3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
4 | All kinds of soil |
5 | Pipes, cables etc, not exceeding 80 mm dia. |
6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
8 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
9 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) |
10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
11 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
12 | Centering and shuttering including strutting, propping etc. and removal of form for : |
13 | Suspended floors, roofs, landings, balconies and access platform |
14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
15 | Cold twisted bars |
16 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
17 | Cement mortar 1:3 (1 cement :3 coarse sand) |
18 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
19 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
20 | 250x16 mm |
21 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
22 | 150x10 mm |
23 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
24 | 125 mm |
25 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
26 | Twin rubber stopper |
27 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
28 | Profile B |
29 | Fixing with adjustable lugs with split end tail to each jamb |
30 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
31 | Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
32 | 12 mm cement plaster of mix : |
33 | 1:4 (1 cement: 4 coarse sand) |
34 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : |
35 | New work (two or more coats) over and including water thinnable priming coat with cement primer |
36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Details attached) |
37 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
38 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
39 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
40 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
41 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
42 | Of area 3 sq. metres and below |
43 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
44 | For thickness of tiles 10 mm to 25 mm |
45 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
46 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings &C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
47 | W.C. pan with ISI marked white solid plastic seat and lid |
48 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
49 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
50 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : (Details attached) |
51 | Kitchen sink without drain board |
52 | 610x510 mm bowl depth 200 mm |
53 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
54 | Orissa pattern W.C. pan of size 580x440 mm |
55 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
56 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
57 | 10 litre (full flush) capacity-white |
58 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
59 | Semi rigid pipe |
60 | 32 mm dia |
61 | Providing and fixing soil, waste and vent pipes : |
62 | 100 mm dia. |
63 | Sand cast iron S&S pipe as per IS: 1729 |
64 | 75 mm diameter : |
65 | Sand cast iron S&S pipe as per IS: 1729 |
66 | Providing and fixing heel rest sanitary bend |
67 | 100 mm dia |
68 | Sand cast iron S&S as per IS - 1729 |
69 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
70 | 100x100x100 mm |
71 | Sand cast iron S&S as per IS - 1729 |
72 | 75x75x75 mm |
73 | Sand cast iron S&S as per IS - 1729 |
74 | Providing and fixing single equal plain junction of required degree : |
75 | 100x100x100 mm |
76 | Sand cast iron S&S as per IS - 1729 |
77 | 75x75x75 mm |
78 | Sand cast iron S&S as per IS - 1729 |
79 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : |
80 | 100 mm |
81 | Sand cast iron S&S as per IS - 1729 |
82 | 75 mm |
83 | Sand cast iron S&S as per IS - 1729 |
84 | Providing and fixing terminal guard : |
85 | 100 mm |
86 | Sand cast iron S&S as per IS - 1729 |
87 | 75 mm |
88 | Sand cast iron S&S as per IS - 1729 |
89 | Providing and fixing collar: |
90 | 100 mm |
91 | Sand cast iron S&S as per IS - 1729 |
92 | 75 mm |
93 | Sand cast iron S&S as per IS - 1729 |
94 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
95 | 100 mm |
96 | 75 mm |
97 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
98 | 100 mm inlet and 75 mm outlet. (dsr item No.17.60.2) |
99 | Sand Cast Iron S&S as per IS- 1729. |
100 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
101 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
102 | Internal work - Exposed on wall |
103 | 20 mm dia nominal bore |
104 | Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall .18.11 |
105 | 15 mm dia nominal bore (dsr item No.18.11.1) |
106 | 20 mm dia nominal bore .(dsr item No.18.11.2) |
107 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :18.17 |
108 | 20 mm nominal bore .18.17.1A |
109 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :18.18 |
110 | 20 mm nominal bore .18.18.2 |
111 | Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21 |
112 | 45 cm length.18.21.2 |
113 | 15 mm nominal bore .18.21.2.1 |
114 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) .18.46 |
115 | 20 mm nominal bore |
116 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
117 | Cutting holes up to 30x30 cm in walls including making good the same: |
118 | With F.P.S. bricks |
119 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : |
120 | 150 mm diameter |
121 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : |
122 | 100 mm diameter S.W. pipe |
123 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
124 | 100x100 mm size P type |
125 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
126 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
127 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : |
128 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
129 | Providing and fixing 1st qualilty ceramic galzed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of size (300mm x 600 mm) as approved by Engineer-in charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
130 | Providing and Fixing ISI marked Water Proof 30 mm thick Flush Door Shutters of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant, eco friendly with 1 mm thick laminated on both side with phenol formaldehyde resin conforming to IS:848 complete in all respect. |
131 | Providing and Fixing of Counter Washbasin of approved make Jaquar Continental CAT No.CNS-WHT-705/ Kohler/ Grohe or its equivalent complete in all respect.17.60 |
132 | Dismantling of Wall tiles and scraping the plaster including removing of malba complete in all respect and to the entire satisfaction of EIC. |
133 | Providing and fixingof C.P. brass angle cock of approved make jaquar continental CAT No.CON 053 KN / Grohe / Kohlermodels complete as per EIC etc complete in all respect at site. |
134 | Providing and fixing looking glass mirror 5 mm thickof approved quality complete with PVC Beeding of 1/4" x 3/4" with plastic hard board duly fixed on wall with screw/nuts/clips/rod plug etc complete in all respect to the entire satisfaction of EIC. (As decided by the EIC) |
135 | Providing and Fixing of Bottle Trap 32 mm size 300mm x 190mm long connection pipe and wall flange make Jaquar Continental CAT No.ALD-769L250X190 or equivalent complete as per site. (As decided by the EIC) |
136 | Providing and Fixing white vitreous china flat back half stall urinal of size 420x395x635mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fittingas per IS:2556, C.I. trap with outlet grating and other couplingts in C.P. brass, including painting of fittings and cutting and making good the walls and floors whereever required : (As decided by the EIC) |
137 | Providing and Fixing of C.P. Tube Connection 450mm Long Braided Hoses of approved make Jaquar CAT No. ALD-CHR-805B/ Grohe/ Kohler with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers) complete in all respect. (As decided by the EIC) |
138 | Providing and Fixing of 32 mm dia G.I. Waste pipe concealed upto 3 feet length for bottle trap including chase cutting and making good the walls complete as per site. |
139 | Providing and Fixing of HCI "P" trap 4" dia for OWC complete in all respect. |
140 | Providing and fixing of C.P. brass Soap dish of approved make jaquar ESSCO CAT NO. AEC-1133 / Grohe / Kohlermodels complete as per EIC etc complete in all respect at site. (As decided by the EIC) |
141 | Providing and fixingof C.P. brass Bib cock makeof approved make jaquar continental CAT No.CON 047 KN / Grohe / Kohlermodels complete as per EIC etc complete in all respect at site. (As decided by the EIC) |
142 | Providing and Fixing Soap Dispensar of approved make Jaquar Continental CAT No.ACN-1135 N/ Grohe / Kohlercomplete in all respect. (As decided by the EIC) |
143 | Providing and fixing of C.P. brass Toilet Paper Holder of Essco Make CAT NO. ACN 1151N or equivalent. (As decided by the EIC) |
144 | Providing and fixing of C.P. Long Bend for OWC of size 32mm dia Complete in all respect. |
145 | Providing and Fixing of C.P. Brass Towel Rail 600mm long of approved make jaquar ESSCO CAT NO. AEC-1111 / Grohe / Kohlermodels complete as per EIC etc complete in all respect at site. (As decided by the EIC) |
146 | Providing and Fixing of C.P. Brass Towel Ringof approved make jaquar ESSCO CAT NO.AEC-1121/ Grohe / Kohlermodels complete as per EIC etc complete in all respect at site. (As decided by the EIC) |
147 | Providing and Fixing of Health Faucet of make jaquar continental (ALD-565) / Grohe / Kohler complete as per EIC etc complete in all respect at site. |
148 | Providing and fixingof C.P. brass Autocloset pressmatic urinal cock of approved make jaquar continental CAT No.PRS-CHR-077/ Grohe / Kohlermodels complete as per EIC etc complete in all respect at site. (As decided by the EIC) |
149 | Providing and Fixing of Pressmatic Pillar Tap of approved make complete in all respect. |
150 | Providing and fixingof C.P. brass long body cock of approved make jaquar continental CAT No.CON 107 KN / Grohe / Kohlermodels complete as per EIC etc complete in all respect at site. (As decided by the EIC) |
151 | Providing and fixing of C.P. Brass Over Head Showerround shape 100 mm dia make Jaquaras CAT No. OHS-1989/ Grohe / Kohler Round Shape SINGLE FLOW (ABS Body Chrome plated with Gray Face Plate)with RCS or equivalent complete in all respects. (As decided by the EIC) |
152 | Providing and fixing of C.P. Brass Shower Arm round Shape 20 mm dia with Wall Flange CAT (SHA-479L450) complete in all respects. (As decided by the EIC) |
153 | Providing and fixingof C.P. brass concealed stop cockof approved make jaquar continental CAT No.083KN/ Grohe / Kohlermodels complete as per EIC etc complete in all respect at site. |
154 | Providing and Fixing of Urinal Partitions curved/ Rectangular Shaped with frosted/ Toughed Glass of approved make complete in all respect. |
155 | Providing and Fixing of Pillar Cock of approved make Jaquar CAT No.CON 011KN/Grohe/ Kohler complete in all respect. |
156 | Providing and Fixing of C.P. Brass Sensor Tap for basin "SUKHNA" 15 mm complete in all respect. (Battery DC) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail