Road And Building Department-RBD has published Construction Of Retaining Wall From 1.900Km To 1.950Km And 2.100Km To 2.150Km Of Road Leading From Paschimeswar Temple Via Mahadev Vihar Construction Of Retaining Wall From 1.900Km To 1.950Km And 2.100Km To 2.150Km Of Road Leading From Paschimeswar Temple. Submission Date for this Tender is 07-10-2021. Wall construction Tenders in ANGUL Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | PART-A (CIVIL WORKS) Excavation for roadway in marshy soil with hydraulic excavator 0.9 cum bucket capacity including cutting & loading in Tippers & disposal with a lift upto 1.5mtr. & lead upto 1000 mtr. trimming of bottom & side slopes in accordance with requirement of lines, grades & cross sections as per technical specificationsincluding labour cess but excluding GST |
| 2 | Providing Sand filling in foundation of structures for Road & Bridge works including basic cost, conveyance,royalties of all materials, cost of all labour, T&P. required for the work etc. including labour cess but excluding GSTcomplete as per specification & direction of Engineer-in-charge. |
| 3 | P.C.C. M-15grade in using 40mm and down graded size (40 mm size 60%, 20 mm size 30% & 10 mm size 10%) in cut of wall and foundation of retaining wall, head wall using crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works, shoring shuttering dewatering if required including basic cost, conveyance, royalty,of all materials, cost of all labour, T&P etc. including labour cess but excluding GSTcomplete as per direction of Engineer-in-charge |
| 4 | RCC M15 having compressive strength of 20mpa, target mean strength of 30mpa, for150mm cubes at 28 days curing as per IS-456-2000 & I.R.C-212000 test conducted in accordance with I.S. 516 using 20mm & down graded size crusher broken hard granite coarse aggregate of approved quality and from approved quarry & other materials as per section 302 of I.R.C.21-2000 & IS-456-2000 of approved quality including centering, shuttering & form works for providing smooth & water tight surface, hoisting, lowering & laying concrete in layers not exceeding 30 cm. compacted thickness, compacting with mechanical vibrators true to lines, grades as per drawing & technical specifications, watering & curing for 28 days including basic cost, conveyance, royalties of all materials with all leads & lift, cost of all labour T&P,including labour cess but excluding GST & equipment required for mixing, transporting & placing in position vibrating, compacting, finishing & curing including all incidental expenses complete in all respect as per direction of the E.I.C. but excluding the cost of M.S. rods or Tor steel and binding wire & labour charges for bending binding & tying the grills Foundation |
| 5 | Sub Structure |
| 6 | Supplying, cutting, straightening the bent up M.S. Rods or Tor steel, using SAIL / TATA / RINL (grade Fe 5OOD} / JINDAL STEEL / SHYAM STEEL etc. including bending, binding, welding joining if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including basic cost, conveyance of all M.S. rods or Tor steel and binding wires of 18· to 20 gauge required for the workbending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) etc. including labour cess but excluding GST complete as per specification & direction of Engineer-in-Charge |
| 7 | Providing weep holes in Brick masonry / Plain /Reinforced concrete abutment, wing wall / return walll with 100 mm dia AC pipe, extending through the full width of the structure with slope of IV:2011 towards drawing foce complete as per drawing and Technical including basic cost of all materials, labour T&P required for the workincluding labour cess but excluding GSTcomplete as per direction of the Engineer-in-charge |
| 8 | Providing & laying of filter media stone crushed aggregates of 45mm size satisfying the requirements, laid down in clause No.2504.2.2 of MoRT&H Specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification including basic cost, conveyance,royalties of all materials, cost of all labour, T&P required for the work etc. including labour cess but excluding GSTcomplete as per specification & direction of Engineer-in-charge |
| 9 | Construction of embankment obtained with approved materials deposited at work site from roadway cutting as per approved drawing and technical specifications as per Clause 305 of MoRT&H Specifications for Road & Bridge works (4th Revision) including basic cost, conveyance,royalties of all materials, cost of all labour, T&P required for the work etc. including labour cess but excluding GSTcomplete as per specification & direction of Engineer-in-charge |
| 10 | Supplying, fitting & fixing / Providing 15cm av. dia and 1.00m long R.C.C. guard posts in M-15 as per approved design & drawing using c.b.h.g. coarse aggregate of 20mm size and down grades of approved qualilty and grading using steel reinforcement of 3.5kg for each guard post including centering, shuttering, watering, curing for 28days and fixing in position in soil of pit size (45cmx45cm) below ground level over C.C.(1:3:6) with painting two coats by enamel paints including basic cost, conveyance, royalty and all otherof all materials, cost of all labour, T&P. equipments, incidentals required for the workincluding labour cess but excluding GST complete as per specification and direction of the Engineer-in-charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
