}

Special Repair To Otm Bldg No T-02 Of 133 Inf Bn ( Ta ) Eco Dogra At Kufri Under Ge Jutogh Special Repair To Otm Bldg No T-02 Of 133 Inf Bn ( Ta ) Eco Dogra At Kufri Under Ge Jutogh, JUTOGH-Himachal Pradesh

Military Engineer Services-MES has published Special Repair To Otm Bldg No T-02 Of 133 Inf Bn ( Ta ) Eco Dogra At Kufri Under Ge Jutogh Special Repair To Otm Bldg No T-02 Of 133 Inf Bn ( Ta ) Eco Dogra At Kufri Under Ge Jutogh. Submission Date for this Tender is 19-10-2021. Building Work Tenders in JUTOGH Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

29291033
Corrigendum : Special Repair To Otm Bldg No T-02 Of 133 Inf Bn ( Ta ) Eco Dogra At Kufri Under Ge Jutogh Special Repair To Otm Bldg No T-02 Of 133 Inf Bn ( Ta ) Eco Dogra At Kufri Under Ge Jutogh
Open Tender
Indian
Himachal Pradesh
JUTOGH
19-10-2021

Tender Details

Special Repair To Otm Bldg No T-02 Of 133 Inf Bn ( Ta ) Eco Dogra At Kufri Under Ge Jutogh Special Repair To Otm Bldg No T-02 Of 133 Inf Bn ( Ta ) Eco Dogra At Kufri Under Ge Jutogh

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 27-Sep-2021 Changes in BOQ BOQ 12-10-2021
2 12-Oct-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 19-10-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 29000.0 /-
Tender Value
INR 14.50 Lakhs /-

BOQ Items

Name of Work: SPECIAL REPAIR TO OTM BLDG NO T-02 OF 133 INF BN (TA) ECO DOGRA AT KUFRI UNDER GE JUTOGH
Sl. No. Item Description
1Dismantling of floor hearth or wall tiling incl cement mortar bedding and removing the rubbish off the premises, complete all as specified and directed.
2Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level, complete all as specified and directed.
3Removing unserviceable building material obtained from dismantling/demolition to a distance exc 1.0KM but n.exc 1.50KM and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.
4Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed.
5M&L forbrick work with sub class "B" brick, straight or curved on planexc 6m mean radius, built in CM 1:6, complete all as specified and directed.
6M&L 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
7M&L forNon skid ceramic coloured tiles 7 to 8mmthick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mmthick screed bed with cement mortar 1:6 complete all as specified and directed.
8M&L forGlazed ceramic coloured tiles in vertical surface 350x250mm/ 450X 350X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchlaid over over 10mm thickrendering in cement mortar 1:4 etc complete all as specified and directed.
9S&F vitrified ceramic coloured tiles dark shade/double charged/ultra charged8-9mm thick size 600X600 mm as in floors etc set & jointed in neat cement slurry & pointed in white cement mixed with colour pigment to match the shade of tiles fixed over and incl screed bed of 15mm thick in CM (1:6) complete all as specified and directed.
10S&F vitrified ceramic coloured tiles dark shade/double charged/ultra charged8-9mm thick size 600X600 mm as in skirting, dado and riser to steps etc set & jointed in neat cement slurry & pointed in white cement mixed with colour pigment to match the shade of tiles fixed over and incl rendering 10mm thick in CM (1:4) complete all as specified and directed.
11Demolition of stone slab and tiles of any thickness or description in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
12M & L for granite (of any type)18-20 mm thick one side machine polished in steps, jambs, pillars, window cills and top of kitchen platform and counter top of wash basin etcset and jointed in neat cement slurry and pointed with coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.
13M&L for granite (of any type) work 18-20mm thick(table rubbed and polished) for wall lining (veneering to wall) including laid over 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite fixed over and including 10mmthick backing coat incement mortar 1:4 complete all as specified and directed.
14Rounding to edges of stone slabs one edge, such as in , cooking platform, and other similar situations complete all as specified and directed.
15M&L 75mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and directed.
16M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre polished glossy finish 30cmx30cmx22-25mm thick, set, jointedand pointed in neat cement slurry with grey cement and pigment in floors laid over and incl 20mm thick screed bed in CM 1:6 complete all as specifiedand directed.
17Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with eater etc,of any heightincluding necessary scaffolding and T&P required to complete the work complete all as specified and directed.
18M&L for rendering 15 mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement at any height complete all as specified and directed.
19M & L for rendering 15mm thick on other than fair faces of brick work or concrete surface in CM 1:4surface finished fair and even mixed withwater proofing compound@ 3% by weight of cement or as per manufacturers instruction, at any height complete all as specified anddirected. Note:WPC shall be measured and paid separately.
20Supply only water proofing compound complete all as specified and directed.
21Demolition of reinforced cement concrete as in cooking platform, lintels, chhajja, cover slab etc of any description and in any position not other wise specifically provided for complete all as specified and directed.
22M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking , bending, hooking end and binding with and including mild steel wire not less than 0.9 mm dia and securing with clips complete all as specified and directed.
23M&L for RCC 1:2:4, type B-1,using 20mm graded crushed stone aggregate as slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like compete all as specified and directed.
24M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or sloping in rough finished surfaces of concretecomplete all as specified and directed.
25Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets compete all as specified and directed.
26M & L 4mm thick non asbestos fibre cement building boards (E board designer with PVC white coating) fixed or laid /insertedto timber/GI/Aluminium frame work with screws in ceiling flat or sloping compete all as specified and directed.
27M&L for GI frame work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre compete all as specified and directed.
28S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long compete all as specified and directed.
29Dismantlingplain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern in roof covering, compete all as specified and directed.
30M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws compete all as specified and directed.
31M&L for pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall eaves board etc., fixed with self tapping screws compete all as specified and directed.
32Taking down chowkhats or frames n exc. 1.5 sq. meach with shutter (without taking off shutters from the frames) and removing from site compete all as specified and directed.
33Taking down chowkhats or frames exc. 1.5 sq. mbutn.exc 4 sqm each with shutter (without taking off shutters from the frames) and removing from site compete all as specified and directed.
34S&F pressed steel frames (made of 1.25 mm thick sheet) for doors of size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling with PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate , complete all as specified and directed.
35S&F pressed steel frames (made of 1.25 mm thick sheet) for doors of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling with PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate , complete all as specified and directed.
36S&F framed work such as grills, gratings, etc.,with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing; framework of watertanks staging and similar work conforming to Fe-290. Gde-E-165 compete all as specified and directed.
37S&F steel windows with side hung shutters including box type hinges with MS handles, MS peg stay with glazing bars, complete all as specified and directed.
38S&F steel windows with side hung shutters including box type hinges with MS handles, MS peg stay without glazing bars, complete all as specified and directed.
39S&F steel ventilator with top hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars complete all as specified and directed.
40S & F MS band straps, clamps, hold fasts, wind ties, fillets etc and similar small articles confirming to Fe 290 Gde E-165 complete all as specified and directed.
41M & L for providing PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in hold fast blocks, copping etc incl form work complete all as specified and directed.
42S&F flush shutters, 35 mm thick, solid core construction, with blockboard core and plywood face panels, commercial type on both side with lipping/frame to match compete all as specified and directed.
43M&L for decorative laminates 0.90 mm thick type I, or surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s insturtions complete all as specified and directed.
44S&F Butt hinges 125mm size extruded brass with mild steel hinge pin, bright polished, type B-11 compete all as specified and directed.
45S&F aluminium (extruded section body) door closer hydraulically regulated, designation No.1 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.
46S&F 2nd class hardwood Glazed and skeleton shutter 35 mm thick,open rebated and prepared to receive glass, gauge etc, (without shas bar), edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-Isection 8 clause 8.20(a) supplied and fitted to chowkat etc compete all as specified and directed.
47M&L for IInd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
48S&F in repair block board 18/19 mm thick, grade 2 quality, "interior grade", decorative type with decorative face veneer on one face, fixed with nails/ screws sin cup board shutter/ pelmets etc. or to timber frame work, including 6mm thick teak wood lipping completeall as specified and directed
49S& F Continuous (piano) hinges , mild steel , bright finish or electro galvanised with 30 mm flaps complete all as specified and directed.
50S&F Hasp and staple 100mm safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
51S&F 40mm dia mild steel cupboard knob fixed with nut, screw and washer of mild steel bright finished complete all as specified and directed.
52S&F Factory madepanel PVC door shutter 30 mm thick (style) consisting of framemade out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded plain colour PVC ‘c’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour pick sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail, Paneling of colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable pick sheet beading and jointed together with solvent cement compete all as specified and directed.
53S&F Solid PVC door frame of size 50mm x47mm made out of 5mm thick plain colouredPVC sheet reinforced with M.S. Square tube, compete all as specified and directed.
54S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks or galvanised wire staple including wooden beading complete all as specified and directed.
55S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane, compete all as specified and directed.
56S&F sheet glass 4mm thick Figured glass, pin head type and glazing with oil putty or wooden bead in squares n exc 0.5 sq. m in each, compete all as specified and directed.
57S&Fbrass sliding door bolt 300 mm long with sand or die cast brass hasp, staple (bolt type and fixing bolt with rolled or drawn brass bolts etc complete all as specified and directed.
58S&F 150mm size extruded brass handles, fabricated type polished complete all as specified and directed.
59S&F 200mm long brass barrel tower bolts, with cast or sheet barrel but with barrel of extruded section omplete all as specified and directed.
60S & F mild steel 300mm ordinary rat rail pattern springs including roller and roller plate compete all as specified and directed.
61S&F aluminium handles,fabricated type, anodised 150 mm size compete all as specified and directed.
62S&F butt hinges 75 mm size medium weight cold rolled mild steel compete all as specified and directed.
63S&F butt hinges 50 mm size medium weight cold rolled mild steel compete all as specified and directed.
64M&L for 2nd class hard wood small fittings such as brackets of any type, latch & hinge blocks, shaped door & window stops & the like including all necessary labours, articles n exc 200 cucm each compete all as specified and directed.
65S&F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed, compete all as specified and directed.
66S&F rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, triple layered, marked embosed, hoisted and fixed in position with and incl new float valve 20mm dia, including connecting up pipes and dismantling of existing unserviceable tank compete all as specified and directed.
67S&F 21-22 inch dia galvanised mild steel pan (Tasla/ ghamela) not less than 1mm thickwith for04 Nos bolt of 5-6mm dia, 8 Nos nut & washer including fixing on water storage tank as tank cover complete all as specified and directed.
68Taking up or down steel tubing and connections 15mm bore including cleaning for refixing or removal from site compete all as specified and directed.
69Taking up or down steel tubing and connections 20mm bore including cleaning for refixing or removal from site compete all as specified and directed.
70M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth compete all as specified and directed.
71S&F 15mm bore mild steel galvanised tubing medium grade galvanised ISI marked with all fittings such as bends, elbows, tees, short pieces, connections, backnuts, diminishing pieces, caps, plugs and unions etc and fixing with wall hooks, wooden plugs etc and cutting, screwing and waste including cutting through walls, floors etc and making good the disturbed surfaces complete to wall and ceilings or laid in floors compete all as specified and directed.
72All as per item No.71 above but 20mm bore of pipe compete all as specified and directed.
73Refixing 15mm bore old Steel water tubing and connectionsof all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
74Refixing 20mm bore old Steel water tubing and connectionsof all new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
75S&F in repair 20mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
76S&F in repairs oval type wash basin super white colour of size 630x450mm vitreous China including all fittings complete, decorative type with pedestal etc.complete all as specified and directed.
77S & F in repair 15mm dia chromium plated brass central hole wash basin mixer (pillar tap) with accessories in wash basins for mixing hot and cold water, screwed down for 15 mm bore GI pipe complete all as specified and directed.
78S&F wash down water closet (Pedestal pattern) coloured including all fittings, fixing bolts,fluhsing cistern and flush pipe complete all as per specified and directed.
79S&FPVC connection 15 mm size with PTMT nuts of length 450mm longcompete all as specified and directed.
80S&F in repair toilet paper holder, vitreous China coloured, box type, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
81S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, compete all as specified and directed.
82S & F 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted with PVC mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers compete all as specified and directed.
83S&F in repairs 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe compete all as specified and directed.
84S&F in repairCP grating 100mm dia with waste hole complete all as specified and directed
85S & F in repair brass chromium plated tubular towel rail ‘D’ type 60cm long between flange, compete all as specified and directed.
86S&F in repair 15 mm bib tap fancy type cast copper alloy chromium plated long body with crutch with butter fly handle, screwed for iron pipe or brass ferrule, compete all as specified and directed.
87S&F in repairs 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or unions compete all as specified and directed.
88S & F in repair 15mm dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe compete all as specified and directed.
89S&F in repair CP brass health fauset telephonic type with CP flexible pipe 1.5m long fixed to EWC suitable for 15mm bore of pipe complete all as specified and directed.
90S&F in repair 450x 350mm bathroom cabinet mirror multipurpose fixed to wall with wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed.
91S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste couplingm waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm compete all as specified and directed.
92S & F in repair stainless steel plate rack for kitchen of size 600 x 750mm with 250mm depth and weight of rack shall not less than 6Kg each, made of 1mm thick sheet of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed.
93S & F in repair 110mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall compete all as specified and directed.
94S & F in repair 75mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall compete all as specified and directed.
95S & F in repair PVC (SWR) bends in any radius 110 mm bore with access door compete all as specified and directed.
96S & F in repairPVC (SWR) bends in any radius 75 mm bore with access door compete all as specified and directed.
97S&F in repair PVC (SWR) Vent cowl 110 mm bore compete all as specified and directed.
98S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement compete all as specified and directed.
99M&L for 20 mm dia mild steel coloured PVC coated fancy curtain rod fitted in MS coloured bracket complete all as specified and directed.
100M&L for mild steel coloured brackets including PVC designer dom for curtain rodcomplete all as specified and directed.
101M&L for preparation of new plasteredsurface of wall and applying two coats of oil bound distemper including priming coat over a coat of 3mm thick wall care putty on plasterred surfacecomplete all as specified anddireceted.
102M&L for prepartion of newly plastered surface of wallapplying two coats of weather proof anti fungal exterier emulsion paint on external surfaces includinga coat of alkali resistant priming paint complete all as specified anddireceted.
103M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty and preparation of surfaces for further treatment andapplying two coats of oil bound distemper of approved shade complete all as specified and as directed .
104M&L for complete removal of existing treatment from walls and applying two coats of weather proof anti fungal exterier emulsion painton external surfaces including a coat of alkali resistant priming paint at any height of building / tower complete all as specified and directed.
105M&L for preparation of old treated surface of ceiling and applying two coats of white wash complete all as specified anddireceted.
106M&L for preparing new or previously untreatedsurfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer completeall as specified and directed.
107M&L for preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint compete all as specified and directed.
108M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm wide or girth incl preparation of surface etc., compete all as specified and directed.
109M&L for applying one coat of synthetic enamel paint on previously treated steel surfaces of any description over 10cm wide or girth incl preparation of surface compete all as specified and directed.
110Dismantling wrought iron or mild steel work of any description not otherwise provided for truss/purlin/rafter compete all as specified and directed.
111M&L for MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W (Gde-E-250) quality B, compete all as specified and directed.
112Taking down carefullyaluminium point wiring (light, Socket or power) completeincluding fittings and fixturessuch as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed.
113M&L for Point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5sqmm with PVC Concealed conduit with fixing accessories, to be fixed, for one light/fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modularwith all fittings (ISI Marked) incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 sqmm for earth wire conncected to common earth dolly complete all as specified and directed.
114All as per item No 113.00 above but for one3/5 pin socket 5 Amp on independentboard with 2.5 sqmm wire and 2.5sqmm earth wire complete all as specified and directed.
115All as per item No 113.00 above but for one3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire with 1.5 sqmm earth wire complete all as specified and directed.
116All as per item No 113.00 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm wire incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4sqmm completeall as specified and directed.
117S&F Modular switch flush type, 5/6 Amps, single pole one module white complete all as specified and directed.
118S&F Modular switch flush type, 15/16 Amps, single pole one module white complete all as specified and directed.
119S&F Modular socket3 pins combined, 5/6 Amp, flush type (multi purpose), two module complete all as specified and directed.
120S&F Modular socket5/6 pins combined, 6/16 Amp, flush type (multi purpose), two module complete all as specified and directed.
121S&F Modular white cover plate with frame suitable for three module complete all as specified and directed.
122S&F Modular white cover plate with frame suitable for four module complete all as specified and directed.
123S&F Modular white cover plate with frame suitable for six module complete all as specified and directed.
124S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm,three terminals complete all as specified and directed.
125S&F angle lamp holder PVC/Polycarbonate base / backsuitable for LED lamp with and incl provn of LED Bulb 9W B-22 Pin type complete all as specified and directed.
126S&FLED 6000K (2’ feet), 10WdecorativeLED lighting fixture with extruded PVC heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down unserviceable fittings complete all as specified and directed. Make :- BAJAJ cat part no:BCLSB 10 W/ Havells cat part no: LUMILINEPLUSBS9WLED865SPCWH/ CG cat part no : LCTL-9-CDL
127S & F in repairs LED tube light along with fixture, 20W(4 feet) wall mounted LED batten, extruded PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed.Make :BAJAJ cat part no:BCLSB 20 WH/ Havells cat part no: LUMILINEBS20WLED865SPCWH/ CG cat part no : LCTL-18-CDL
128S&F LED bulkhead luminaire 10W decorative type as per sample complete and including taking down existing fittings complete all as specified and directed. Make : BAJAJ cat part no:BIBWP 10W LED/ Havells cat part no:RUGBYNEONFT10WLED860SSYMTOPC/ CG cat part no : LBHE-10-CDL .
129S&F LED building secuity light 25 watt, incl bracket as per suitable size and all connected accessories ( clamps, nut, bolt etc)complete and including taking down existing fittings complete all as specified and directed.Make : BAJAJ cat part no:BCLST 25W LED I V2/ Havells cat part no: ENDURAPEARLSL25WLED757SASYTOPCMP/ CG cat part no : LSTS-25-CDL.
130S&F in repairs Skylite recess mounting,36W, LED 2"x2" luminaire integrated electronic driver, optics diffused, complete all as specified and directed. Make : BAJAJ cat part no:BCTBLR 36WLED/Havells cat part no: PLUTONEO2X2PLR34WLED857S/ CG cat part no : LCTLRN-36-FO-CDL .
131S&F in repairs Skylite recess mounting 18 W LED 1"x1" luminairentegrated electronic driver, optics diffused, complete all as specified and directed. Make : Bajaj Cat part No BGSLO SLEEK 15W WHSQ/ Havells cat part No EDGEPROSQDLR15W LED 857S/CG Cat part No: LSCSM-18-CDL/NW/WW .
132M&L for submain wiring with 2X6.0 sqmm +1X6.0sqmm earth wire single core PVC insulated FRSL sheathed cooper cableconnecting to common earth dolly in and including heavy dutyPVC conduit with all accessories including taking down old unserviceable wiring complete all as specified and directed. Note: Three run of 6sqmm and 1 Run of PVC conduit shall be measured as One RM
133S&F in repairs VTPN prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete all as specified and directed. Note : Rates of MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates.
134S & F in repairs single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with busbar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed.
135S&F MCB SPN 06 to 40 Amps 240Vincl all termnials, fitting "B" curve complete all as specified and directed.
136S&F MCB SP 06 to 40 Amps 240Vincl all termnials, fitting "B" curve complete all as specified and directed.
137S&F exhaust fan heavy duty, MS body, 300mm sweep, 1400 RPM including fixing arrangement with fastner, nut , bolt, washers etc complete with louver shutters and making hole of suitable size for fixing the exhaust fanincluding taking down old unserviceable fan and deposited to AGE E/M store yard and making good disturbed surface as per existing finishes complete all as specified and directed.
138M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanisedmeans of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail