}

Comprehensive Repair To Dad Complex And Otm Accn Under Ge Shikargarh Jodhpur Comprehensive Repair To Dad Complex And Otm Accn Under Ge Shikargarh Jodhpur, GE SHIKARGARH-Rajasthan

Military Engineer Services-MES has published Comprehensive Repair To Dad Complex And Otm Accn Under Ge Shikargarh Jodhpur Comprehensive Repair To Dad Complex And Otm Accn Under Ge Shikargarh Jodhpur. Submission Date for this Tender is 14-10-2021. Building Work Tenders in GE SHIKARGARH Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

29290951
Corrigendum : Comprehensive Repair To Dad Complex And Otm Accn Under Ge Shikargarh Jodhpur Comprehensive Repair To Dad Complex And Otm Accn Under Ge Shikargarh Jodhpur
Open Tender
Indian
Rajasthan
GE SHIKARGARH
14-10-2021

Tender Details

Comprehensive Repair To Dad Complex And Otm Accn Under Ge Shikargarh Jodhpur Comprehensive Repair To Dad Complex And Otm Accn Under Ge Shikargarh Jodhpur

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 07-Oct-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 14-10-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 98000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: COMPREHENSIVE REPAIR TO DAD COMPLEX AND OTM ACCN UNDER GE SHIKARGARH JODHPUR
Sl. No. Item Description
1Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc;overall thicknessand removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer incharge.
2M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates filling over roof for making good depression/ undulation of existing roof surfacesroof slab/ floor padding/ roof kerbs rounded or chamfered on edges coping etc; complete all as specified and as directed.
3Supply only integral water proofing liquid ISI marked Make: Pidiproof LW or equivalent
4Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness belowor above ground level including floor finishes and removing debris from the site all as specified and as directed.
5Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide.
6M&L non skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
7M&L non skid ceramic colored tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting, (Matching with floor tile of the same room) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
8M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
9M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 450X300X7 to 8mm thick or any other nearer size as approved by Engineer In Charge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.
10M&L for 16 -18mm thick granite (BLACK colour as approved) work (table rubbed and polished) in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
11M&L for 16 -18mm thick granite (BLACK colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
12M&L for machine cut kota stone slab flooring 18-20 mmthick over cement screed base laid and jointed with greycement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.
13M&L for mirror polished machine cut Kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.
14Demolition Stone slabs and tiles of any description or thickness in floors, aprons, roof etc; laid bedded and pointed in any mortar
15M&L for Jodhpur stone slabs, machine cut (dressed face) 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted (vertical or horrizontal) and set, jointed and grouted cement mortar 1:3 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade ofstone slab making with cutting of groove as required etc; complete all as specified and as directed.
16M&L for Jodhpur stone slab patti machine cut, 40 to 50mm thick laid over and including 15mm thick cm 1:4 and jointed & pointed in neat cement slurry as in floors, plinth protection, including provision of construction joints as required etc; complete all as specified and directed.
17M&L for 75mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc finished fair complete all as specified.
18M&L for 60mm thick factory made pre cast cement concrete rubber moulded laquer finish using chemical and admixure inter locking tiles having compressive strength not less than 350 kg/Sqcm,of shape and colour as approved by GE , laid over and including 25mm thickcompacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed.
19M&L for factory made precast cement concrete solid blocks M-30 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size (with plain or interlocking joints as directed) set in cement mortar 1:4 for path edgings etc; embedded in position including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc., complete all as specified and directed by Engineer-in-Charge.
20M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified.
21Dismantling of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work,serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.
22M&L for squared rubble walling jodhpur type, brought upto course, well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.
23-ditto- all asper above item but, except stone complete all as specified and as directed.
24M&L for brick work with fly ash bricks (old size bricks), straight or curved on plan exc 6mtr mean radius, built in cement mortar (1:6) complete all as specified and as directed.
25Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses all as specified and as directed.
26Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed
27M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.
28M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4finished fair and even all as specified and as directed.
29M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.
30M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces by washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and laying 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed 10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer"s instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating shall be achieved as per manufacturers instruction complete all as specified and directed.
31Dismantling cast iron work of any description and in any position complete all as specified.
32S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.
33Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified.
34S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.
35Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified.
36S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.
37Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified.
38S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.
39Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified.
40S&F 100mm bore pipe cast iron "P" or "S" trap, complete all as specified.
41S&F 75mm bore pipe cast iron "P" or "S" trap, complete all as specified.
42S&F 100mm bore pipe cast iron cowls, complete all as specified.
43Fixing only in repair 100mm bore pipe cast iron or any type cowls, complete all as specified.
44S&F 75mm bore pipe cast iron cowls, complete all as specified.
45Fixing only in repair 75mm bore pipe cast iron or any type cowls, complete all as specified.
46M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, "Y" junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.
47Fixing only in repair any type or cast iron up 150mm bore fittings of Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, "Y" junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.
48M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.
49M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.
50S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.
51S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.
52M&L cement concrete type E-2, 1:5:10 (40mm graded crushed stone aggregate) as in sunken portion complete all as specified.
53S&F 40mm bore steel water tubing medium grade galvanised insertedat the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specifide.
54Taking down chowkhats or frames with shutters (without taking off shutters from the frames) notexc 1.5 sqm each and removing from site or to store as directed by Engineer incharge.
55S&F of Factory made steel window box type using ERW hollow "P" section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer incharge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required) all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 fixed in repairs i.e, incl taking down and removal of old steel windows from site or to store complete all as specified and directed. Note:- (i) TD drawing is not enclose and can be seen in any of the offices during working hours and on working days. (ii) Guard bar/ grillshall be measured and paid separately under respective item of Sch "A".
56M&L for fabrication ofaluminium powder coated window/ ventilator any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc; fixed in position all as specified and directed. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately under respective Items of Sch "A".
57S&F for tinted glass of selected quality, 5mm thick , and glazing with aluminium beading & rubber gasketin aluminium frame all as specified and as directed.
58S&F Sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.
59.-Ditto- all as per above item but 4mm thick frosted glass complete all as specified and directed.
60S&F in repairsheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.
61S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, wooden beads or galvanised wire staples complete all as specified & as directed.
62S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, wooden beads or galvanised wire staples complete all as specified & as directed.
63S&F Mild steel round bars welded to steel windows or ventilators as in guard bars framed or unframed complete all as specified & as directed by Engineer incharge. Note : - Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates.
64S&F Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,S&F. Make : Rajshree Doors or equivalent as approved by GE.
65S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make : Rajshree Doors or equivalent as approved by GE.
66S & F 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges all as specified and directed.
67S&F mild steel door handles, stove enameled black, 150 mm long and fixed with steel screws complete all as specified.
68S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified.
69Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified.
70S&F framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and directed by Engineer-in-charge.
71S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel, flat or MS hollow square/ rectangular any type, size/ sections), includingdistance pieces, cleats etc conforming toFE- 290 (Gde-E- 165), including fabrication, erraction and fixing complete all as specified.
72Dismantling asbestos cement (corrugated or semi corrugated) any type sheets in any position roof coverings complete all as specified.
73S&F Pre-painted coloured galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
74---ditto--- but plain sheet
75S&F Prelaminated particle board 18/ 19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work with wooden beading as required fixed in repairs i.e., including taking down and removal of old unserviceable boarding of any description and in any position complete all as specified and as directed.
76S&F 2ndclass hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
77S&F Mild steel butt hinges 100mm long, medium weight cold rolled fixed with steel chowakats etc; complete all as specified.
78S&F alluminium anodised handles 100 mm long fixed to windows all as specified and directed.
79S&F in repair Decorative mild steel curtain rods 32mm dia (powder/PVC coated)including fixing brackets & side cups complete fixed in repairs i.e., including taking down the existing unserviceable curtain rods complete all as specified and directed
80S&F Powder coated aluminium anodised deco grill weighing not less than 1.40 kg/ sqm and fixing necessary joining cleats/ frame etc; complete all as specified.
81Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.
82Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.
83Taking down 25mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.
84S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.
85S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.
86S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.
87Fixing only 15mm bore steel water tubing any grade with new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.
88Fixing only 20mm bore steel water tubing any grade with new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.
89Fixing only 25mm bore steel water tubing any grade with new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.
90S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified.
91S&F in repair vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified.
92Fixing only in repair vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified.
93S&F in repair for Vitreous china urinal, half stall type, white,completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections,complete all as specified and as directed.
94S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer in white colour hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.
95S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer in white colour hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.
96S&F in repair CP greating doom 100mm dia complete all as specified.
97Fixing only in repair PVC 10 ltr. Cap. valveless syphonic action type, flushing cistern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all as specified. (Note:- PVC flushing cictern will be issued under schedule "B" free for fixing only).
98Fixing only in repair for PVC connections any type and length suitable for 15mm bore of pipe complete all as specified. (Note:- PVC connections pipe will be issued under schedule "B" free for fixing only).
99Fixing only in repair for looking mirror of any type and size, fixed to wall with plug and screws etc; complete all as specified. (Note:- Looking mirror will be issued under schedule "B" free for fixing only).
100Fixing only in repair for 15mm bore bib tap any type and shape, screwed down, screwed for iron pipe complete all as specified. (Note:- bib taps will be issued under schedule "B" free for fixing only).
101Fixing only in repair for 15mm dia pillar tap any type and shape, screwed for iron pipes or for wash hand basin all as specified and as directed. (Note:- Pillar taps will be issued under schedule "B" free for fixing only).
102Fixing only in repair 15-20mm bore stop valve/ angle stop cock any type and shape screwed for iron pipe complete all as specified. (Note:- stop valves/ stop cocks will be issued under schedule "B" free for fixing only).
103Fixing only in repair 15-25mm bore Gun-metal, globe or gate valves, any type and shape screwed both ends for iron pipe complete all as specified. (Note:- gate valves will be issued under schedule "B" free for fixing only).
104Fixing only in repair shower roses any size any type with or without swivel joints including fixing to steel pipe or union suitable for 15mm bore pipe etc; complete all as specified. (Note:- shower roses with arm will be issued under schedule "B" free for fixing only).
105Fixing only in repair float valve/ ball valves any size any type screwed for iron pipe etc; complete all as specified and as directed. (Note:- float valve/ ball valves will be issued under schedule "B" free for fixing only).
106Fixing only in repair towel rail any size/ length and any pattern fixed to wall complete all as specified and as directed. (Note:- towel rails will be issued under schedule "B" free for fixing only).
107Fixing only in repair for stainless steel plate rack of any type, size and pattern fixed to wall with plug and screws etc; complete all as specified. (Note:- Steel plate racks will be issued under schedule "B" free for fixing only).
108Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
109Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cmand applying two coats of synthetic enamel paint complete all as specified andas directed by Engineer incharge.
110Preparing new plastered surfaces and M&L for applying chalk whitening/ concrete primeras required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of Distemper oil Emulsion on new plastered surfaces all as directed by Engr in charge.
111---ditto--- but over cement based putty
112Preparing new plastered surfaces and M&L for applying concrete primeras required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces all as directed by Engr in charge.
113---ditto--- but over cement based putty
114Preparation of newplastered surfaces of walls etc. & applying three coats of limewhite wash on walls complete all as specified.
115Preparation of newplastered surfaces of ceiling etc. & applying three coats of limewhite wash on ceilingcomplete all as specified.
116M&Lfor removingany type of Grass/plants/bushes (girth n.exc 15cm of trunk of any of plants) grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surfaceand pouring acid or plants root burning chemical not less than 100ml for each plant in the roof to avoid further growth and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using waterproofing compound as per manufacturer"s instruction and making the patch finished with painting as per surroundings complete all as specified and as directed. (Note:- Rate quoted is deemed to be included for scaffolding, saftey, measured required for working on or upto height of 20 metre vertical slopes.)
117S&F in repairs sand surface PVC sports colored flooring 4.5mm thick (weight not less than 3.0kg per sqm) shock absorption (not less than 26%), pre marking, non slip, wear resistance, noise proof, stretch resistance, anti microbial etc; for indoor sports groundincluding laying and jointed with SR Solution or plastic welding code complete all as as directed and as per manufacturer"s instructions.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail